/*++
Copyright (c) 1996 Microsoft Corporation
Module Name:
winsmcrd.h
Abstract:
Smart Card class/port IOCTL codes. This file is required for all code
user mode and kernel mode, using Smart Card IOCTL's, defines,
data structures
Revision History:
--*/
#ifndef _NTDDSCRD_H2_
#define _NTDDSCRD_H2_
#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif
#ifdef __cplusplus
extern "C" {
#endif
#ifdef _WINSCARD_H_
typedef DWORD ULONG;
typedef WORD UWORD;
typedef BYTE UCHAR;
#else
typedef ULONG DWORD;
// typedef UWORD WORD;
typedef UCHAR BYTE;
#endif
#ifndef DEVICE_TYPE_SMARTCARD
#ifndef FILE_DEVICE_SMARTCARD
#define FILE_DEVICE_SMARTCARD 0x00000031
#endif
#else
#if 0x00000031 != FILE_DEVICE_SMARTCARD
#error "Incorrect Smart Card Device Definition"
#endif
#endif
//
// Various constants
//
#define SCARD_ATR_LENGTH 33 // ISO 7816-3 spec.
//
///////////////////////////////////////////////////////////////////////////////
//
// Protocol Flag definitions
//
#define SCARD_PROTOCOL_UNDEFINED 0x00000000 // There is no active protocol.
#define SCARD_PROTOCOL_T0 0x00000001 // T=0 is the active protocol.
#define SCARD_PROTOCOL_T1 0x00000002 // T=1 is the active protocol.
#define SCARD_PROTOCOL_RAW 0x00010000 // Raw is the active protocol.
//
// This is the mask of ISO defined transmission protocols
//
#define SCARD_PROTOCOL_Tx (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1)
//
// Use the default transmission parameters / card clock freq.
//
#define SCARD_PROTOCOL_DEFAULT 0x80000000
//
// Use optimal transmission parameters / card clock freq.
// Since using the optimal parameters is the default case no bit is defined to be 1
//
#define SCARD_PROTOCOL_OPTIMAL 0x00000000
//
// Ioctl parameters 1 for IOCTL_SMARTCARD_POWER
//
#define SCARD_POWER_DOWN 0 // Power down the card.
#define SCARD_COLD_RESET 1 // Cycle power and reset the card.
#define SCARD_WARM_RESET 2 // Force a reset on the card.
//
///////////////////////////////////////////////////////////////////////////////
//
// Reader Action IOCTLs
//
#define SCARD_CTL_CODE(code) CTL_CODE(FILE_DEVICE_SMARTCARD, \
(code), \
METHOD_BUFFERED, \
FILE_ANY_ACCESS)
#define IOCTL_SMARTCARD_POWER SCARD_CTL_CODE( 1)
#define IOCTL_SMARTCARD_GET_ATTRIBUTE SCARD_CTL_CODE( 2)
#define IOCTL_SMARTCARD_SET_ATTRIBUTE SCARD_CTL_CODE( 3)
#define IOCTL_SMARTCARD_CONFISCATE SCARD_CTL_CODE( 4)
#define IOCTL_SMARTCARD_TRANSMIT SCARD_CTL_CODE( 5)
#define IOCTL_SMARTCARD_EJECT SCARD_CTL_CODE( 6)
#define IOCTL_SMARTCARD_SWALLOW SCARD_CTL_CODE( 7)
// #define IOCTL_SMARTCARD_READ SCARD_CTL_CODE( 8) obsolete
// #define IOCTL_SMARTCARD_WRITE SCARD_CTL_CODE( 9) obsolete
#define IOCTL_SMARTCARD_IS_PRESENT SCARD_CTL_CODE(10)
#define IOCTL_SMARTCARD_IS_ABSENT SCARD_CTL_CODE(11)
#define IOCTL_SMARTCARD_SET_PROTOCOL SCARD_CTL_CODE(12)
#define IOCTL_SMARTCARD_GET_STATE SCARD_CTL_CODE(14)
#define IOCTL_SMARTCARD_GET_LAST_ERROR SCARD_CTL_CODE(15)
#define IOCTL_SMARTCARD_GET_PERF_CNTR SCARD_CTL_CODE(16)
//
///////////////////////////////////////////////////////////////////////////////
//
// Tags for requesting card and reader attributes
//
#define MAXIMUM_ATTR_STRING_LENGTH 32 // Nothing bigger than this from getAttr
#define MAXIMUM_SMARTCARD_READERS 10 // Limit the readers on the system
#define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag)))
#define SCARD_CLASS_VENDOR_INFO 1 // Vendor information definitions
#define SCARD_CLASS_COMMUNICATIONS 2 // Communication definitions
#define SCARD_CLASS_PROTOCOL 3 // Protocol definitions
#define SCARD_CLASS_POWER_MGMT 4 // Power Management definitions
#define SCARD_CLASS_SECURITY 5 // Security Assurance definitions
#define SCARD_CLASS_MECHANICAL 6 // Mechanical characteristic definitions
#define SCARD_CLASS_VENDOR_DEFINED 7 // Vendor specific definitions
#define SCARD_CLASS_IFD_PROTOCOL 8 // Interface Device Protocol options
#define SCARD_CLASS_ICC_STATE 9 // ICC State specific definitions
#define SCARD_CLASS_PERF 0x7ffe // performace counters
#define SCARD_CLASS_SYSTEM 0x7fff // System-specific definitions
#define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100)
#define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101)
#define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102)
#define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103)
#define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110)
#define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
// #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
#define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121)
#define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122)
#define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123)
#define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124)
#define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125)
// #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126)
#define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131)
#define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140)
#define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142)
#define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150)
#define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201)
#define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202)
#define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203)
#define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204)
#define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205)
#define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206)
#define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207)
#define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208)
#define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209)
#define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a)
#define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b)
#define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c)
#define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300)
#define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301)
#define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302)
#define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303)
#define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304)
#define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000)
#define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003)
#define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005)
#define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007)
#define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001)
#define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006)
#define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007)
#define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001)
#define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002)
#define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003)
#ifdef UNICODE
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W
#else
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A
#endif
//
// T=0 Protocol Defines
//
#define SCARD_T0_HEADER_LENGTH 7
#define SCARD_T0_CMD_LENGTH 5
//
// T=1 Protocol Defines
//
#define SCARD_T1_PROLOGUE_LENGTH 3
#define SCARD_T1_EPILOGUE_LENGTH 2
#define SCARD_T1_MAX_IFS 254
//
///////////////////////////////////////////////////////////////////////////////
//
// Reader states
//
#define SCARD_UNKNOWN 0 // This value implies the driver is unaware
// of the current state of the reader.
#define SCARD_ABSENT 1 // This value implies there is no card in
// the reader.
#define SCARD_PRESENT 2 // This value implies there is a card is
// present in the reader, but that it has
// not been moved into position for use.
#define SCARD_SWALLOWED 3 // This value implies there is a card in the
// reader in position for use. The card is
// not powered.
#define SCARD_POWERED 4 // This value implies there is power is
// being provided to the card, but the
// Reader Driver is unaware of the mode of
// the card.
#define SCARD_NEGOTIABLE 5 // This value implies the card has been
// reset and is awaiting PTS negotiation.
#define SCARD_SPECIFIC 6 // This value implies the card has been
// reset and specific communication
// protocols have been established.
////////////////////////////////////////////////////////////////////////////////
//
// I/O Services
//
// The following services provide access to the I/O capabilities of the
// reader drivers. Services of the Smart Card are requested by placing the
// following structure into the protocol buffer:
//
typedef struct _SCARD_IO_REQUEST{
DWORD dwProtocol; // Protocol identifier
DWORD cbPciLength; // Protocol Control Information Length
} SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST;
typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST;
//
// T=0 protocol services.
//
typedef struct {
BYTE
bCla, // The instruction class
bIns, // The instruction code within the instruction class
bP1,
bP2, // Parameters to the instruction
bP3; // Size of I/O Transfer
} SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND;
typedef struct {
SCARD_IO_REQUEST ioRequest;
BYTE
bSw1,
bSw2; // Return codes from the instruction
union
{
SCARD_T0_COMMAND CmdBytes;
BYTE rgbHeader[5];
} DUMMYUNIONNAME;
} SCARD_T0_REQUEST;
typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST;
//
// T=1 Protocol Services
//
typedef struct {
SCARD_IO_REQUEST ioRequest;
} SCARD_T1_REQUEST;
typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST;
//
////////////////////////////////////////////////////////////////////////////////
//
// Driver attribute flags
//
#define SCARD_READER_SWALLOWS 0x00000001 // Reader has a card swallowing
// mechanism.
#define SCARD_READER_EJECTS 0x00000002 // Reader has a card ejection
// mechanism.
#define SCARD_READER_CONFISCATES 0x00000004 // Reader has a card capture
// mechanism.
//
///////////////////////////////////////////////////////////////////////////////
//
// Type of reader
//
#define SCARD_READER_TYPE_SERIAL 0x01
#define SCARD_READER_TYPE_PARALELL 0x02
#define SCARD_READER_TYPE_KEYBOARD 0x04
#define SCARD_READER_TYPE_SCSI 0x08
#define SCARD_READER_TYPE_IDE 0x10
#define SCARD_READER_TYPE_USB 0x20
#define SCARD_READER_TYPE_PCMCIA 0x40
#define SCARD_READER_TYPE_VENDOR 0xF0
#ifdef __cplusplus
}
#endif
#endif