/*
scarderr.mc
Error message codes from the Smart Card Resource Manager
These messages must be reconciled with winerror.w
They exist here to provide error messages on pre-Win2K systems.
*/
#ifndef SCARD_S_SUCCESS
//
// =============================
// Facility SCARD Error Messages
// =============================
//
#define SCARD_S_SUCCESS NO_ERROR
//
// Values are 32 bit values laid out as follows:
//
// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
// +---+-+-+-----------------------+-------------------------------+
// |Sev|C|R| Facility | Code |
// +---+-+-+-----------------------+-------------------------------+
//
// where
//
// Sev - is the severity code
//
// 00 - Success
// 01 - Informational
// 10 - Warning
// 11 - Error
//
// C - is the Customer code flag
//
// R - is a reserved bit
//
// Facility - is the facility code
//
// Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_SYSTEM 0x0
#define FACILITY_SCARD 0x10
//
// Define the severity codes
//
#define STATUS_SEVERITY_WARNING 0x2
#define STATUS_SEVERITY_INFORMATIONAL 0x1
#define STATUS_SEVERITY_ERROR 0x3
//
// MessageId: SCARD_F_INTERNAL_ERROR
//
// MessageText:
//
// An internal consistency check failed.
//
#define SCARD_F_INTERNAL_ERROR ((DWORD)0x80100001L)
//
// MessageId: SCARD_E_CANCELLED
//
// MessageText:
//
// The action was cancelled by an SCardCancel request.
//
#define SCARD_E_CANCELLED ((DWORD)0x80100002L)
//
// MessageId: SCARD_E_INVALID_HANDLE
//
// MessageText:
//
// The supplied handle was invalid.
//
#define SCARD_E_INVALID_HANDLE ((DWORD)0x80100003L)
//
// MessageId: SCARD_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more of the supplied parameters could not be properly interpreted.
//
#define SCARD_E_INVALID_PARAMETER ((DWORD)0x80100004L)
//
// MessageId: SCARD_E_INVALID_TARGET
//
// MessageText:
//
// Registry startup information is missing or invalid.
//
#define SCARD_E_INVALID_TARGET ((DWORD)0x80100005L)
//
// MessageId: SCARD_E_NO_MEMORY
//
// MessageText:
//
// Not enough memory available to complete this command.
//
#define SCARD_E_NO_MEMORY ((DWORD)0x80100006L)
//
// MessageId: SCARD_F_WAITED_TOO_LONG
//
// MessageText:
//
// An internal consistency timer has expired.
//
#define SCARD_F_WAITED_TOO_LONG ((DWORD)0x80100007L)
//
// MessageId: SCARD_E_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data buffer to receive returned data is too small for the returned data.
//
#define SCARD_E_INSUFFICIENT_BUFFER ((DWORD)0x80100008L)
//
// MessageId: SCARD_E_UNKNOWN_READER
//
// MessageText:
//
// The specified reader name is not recognized.
//
#define SCARD_E_UNKNOWN_READER ((DWORD)0x80100009L)
//
// MessageId: SCARD_E_TIMEOUT
//
// MessageText:
//
// The user-specified timeout value has expired.
//
#define SCARD_E_TIMEOUT ((DWORD)0x8010000AL)
//
// MessageId: SCARD_E_SHARING_VIOLATION
//
// MessageText:
//
// The smart card cannot be accessed because of other connections outstanding.
//
#define SCARD_E_SHARING_VIOLATION ((DWORD)0x8010000BL)
//
// MessageId: SCARD_E_NO_SMARTCARD
//
// MessageText:
//
// The operation requires a Smart Card, but no Smart Card is currently in the device.
//
#define SCARD_E_NO_SMARTCARD ((DWORD)0x8010000CL)
//
// MessageId: SCARD_E_UNKNOWN_CARD
//
// MessageText:
//
// The specified smart card name is not recognized.
//
#define SCARD_E_UNKNOWN_CARD ((DWORD)0x8010000DL)
//
// MessageId: SCARD_E_CANT_DISPOSE
//
// MessageText:
//
// The system could not dispose of the media in the requested manner.
//
#define SCARD_E_CANT_DISPOSE ((DWORD)0x8010000EL)
//
// MessageId: SCARD_E_PROTO_MISMATCH
//
// MessageText:
//
// The requested protocols are incompatible with the protocol currently in use with the smart card.
//
#define SCARD_E_PROTO_MISMATCH ((DWORD)0x8010000FL)
//
// MessageId: SCARD_E_NOT_READY
//
// MessageText:
//
// The reader or smart card is not ready to accept commands.
//
#define SCARD_E_NOT_READY ((DWORD)0x80100010L)
//
// MessageId: SCARD_E_INVALID_VALUE
//
// MessageText:
//
// One or more of the supplied parameters values could not be properly interpreted.
//
#define SCARD_E_INVALID_VALUE ((DWORD)0x80100011L)
//
// MessageId: SCARD_E_SYSTEM_CANCELLED
//
// MessageText:
//
// The action was cancelled by the system, presumably to log off or shut down.
//
#define SCARD_E_SYSTEM_CANCELLED ((DWORD)0x80100012L)
//
// MessageId: SCARD_F_COMM_ERROR
//
// MessageText:
//
// An internal communications error has been detected.
//
#define SCARD_F_COMM_ERROR ((DWORD)0x80100013L)
//
// MessageId: SCARD_F_UNKNOWN_ERROR
//
// MessageText:
//
// An internal error has been detected, but the source is unknown.
//
#define SCARD_F_UNKNOWN_ERROR ((DWORD)0x80100014L)
//
// MessageId: SCARD_E_INVALID_ATR
//
// MessageText:
//
// An ATR obtained from the registry is not a valid ATR string.
//
#define SCARD_E_INVALID_ATR ((DWORD)0x80100015L)
//
// MessageId: SCARD_E_NOT_TRANSACTED
//
// MessageText:
//
// An attempt was made to end a non-existent transaction.
//
#define SCARD_E_NOT_TRANSACTED ((DWORD)0x80100016L)
//
// MessageId: SCARD_E_READER_UNAVAILABLE
//
// MessageText:
//
// The specified reader is not currently available for use.
//
#define SCARD_E_READER_UNAVAILABLE ((DWORD)0x80100017L)
//
// MessageId: SCARD_P_SHUTDOWN
//
// MessageText:
//
// The operation has been aborted to allow the server application to exit.
//
#define SCARD_P_SHUTDOWN ((DWORD)0x80100018L)
//
// MessageId: SCARD_E_PCI_TOO_SMALL
//
// MessageText:
//
// The PCI Receive buffer was too small.
//
#define SCARD_E_PCI_TOO_SMALL ((DWORD)0x80100019L)
//
// MessageId: SCARD_E_READER_UNSUPPORTED
//
// MessageText:
//
// The reader driver does not meet minimal requirements for support.
//
#define SCARD_E_READER_UNSUPPORTED ((DWORD)0x8010001AL)
//
// MessageId: SCARD_E_DUPLICATE_READER
//
// MessageText:
//
// The reader driver did not produce a unique reader name.
//
#define SCARD_E_DUPLICATE_READER ((DWORD)0x8010001BL)
//
// MessageId: SCARD_E_CARD_UNSUPPORTED
//
// MessageText:
//
// The smart card does not meet minimal requirements for support.
//
#define SCARD_E_CARD_UNSUPPORTED ((DWORD)0x8010001CL)
//
// MessageId: SCARD_E_NO_SERVICE
//
// MessageText:
//
// The Smart card resource manager is not running.
//
#define SCARD_E_NO_SERVICE ((DWORD)0x8010001DL)
//
// MessageId: SCARD_E_SERVICE_STOPPED
//
// MessageText:
//
// The Smart card resource manager has shut down.
//
#define SCARD_E_SERVICE_STOPPED ((DWORD)0x8010001EL)
//
// MessageId: SCARD_E_UNEXPECTED
//
// MessageText:
//
// An unexpected card error has occurred.
//
#define SCARD_E_UNEXPECTED ((DWORD)0x8010001FL)
//
// MessageId: SCARD_E_ICC_INSTALLATION
//
// MessageText:
//
// No Primary Provider can be found for the smart card.
//
#define SCARD_E_ICC_INSTALLATION ((DWORD)0x80100020L)
//
// MessageId: SCARD_E_ICC_CREATEORDER
//
// MessageText:
//
// The requested order of object creation is not supported.
//
#define SCARD_E_ICC_CREATEORDER ((DWORD)0x80100021L)
//
// MessageId: SCARD_E_UNSUPPORTED_FEATURE
//
// MessageText:
//
// This smart card does not support the requested feature.
//
#define SCARD_E_UNSUPPORTED_FEATURE ((DWORD)0x80100022L)
//
// MessageId: SCARD_E_DIR_NOT_FOUND
//
// MessageText:
//
// The identified directory does not exist in the smart card.
//
#define SCARD_E_DIR_NOT_FOUND ((DWORD)0x80100023L)
//
// MessageId: SCARD_E_FILE_NOT_FOUND
//
// MessageText:
//
// The identified file does not exist in the smart card.
//
#define SCARD_E_FILE_NOT_FOUND ((DWORD)0x80100024L)
//
// MessageId: SCARD_E_NO_DIR
//
// MessageText:
//
// The supplied path does not represent a smart card directory.
//
#define SCARD_E_NO_DIR ((DWORD)0x80100025L)
//
// MessageId: SCARD_E_NO_FILE
//
// MessageText:
//
// The supplied path does not represent a smart card file.
//
#define SCARD_E_NO_FILE ((DWORD)0x80100026L)
//
// MessageId: SCARD_E_NO_ACCESS
//
// MessageText:
//
// Access is denied to this file.
//
#define SCARD_E_NO_ACCESS ((DWORD)0x80100027L)
//
// MessageId: SCARD_E_WRITE_TOO_MANY
//
// MessageText:
//
// The smartcard does not have enough memory to store the information.
//
#define SCARD_E_WRITE_TOO_MANY ((DWORD)0x80100028L)
//
// MessageId: SCARD_E_BAD_SEEK
//
// MessageText:
//
// There was an error trying to set the smart card file object pointer.
//
#define SCARD_E_BAD_SEEK ((DWORD)0x80100029L)
//
// MessageId: SCARD_E_INVALID_CHV
//
// MessageText:
//
// The supplied PIN is incorrect.
//
#define SCARD_E_INVALID_CHV ((DWORD)0x8010002AL)
//
// MessageId: SCARD_E_UNKNOWN_RES_MNG
//
// MessageText:
//
// An unrecognized error code was returned from a layered component.
//
#define SCARD_E_UNKNOWN_RES_MNG ((DWORD)0x8010002BL)
//
// MessageId: SCARD_E_NO_SUCH_CERTIFICATE
//
// MessageText:
//
// The requested certificate does not exist.
//
#define SCARD_E_NO_SUCH_CERTIFICATE ((DWORD)0x8010002CL)
//
// MessageId: SCARD_E_CERTIFICATE_UNAVAILABLE
//
// MessageText:
//
// The requested certificate could not be obtained.
//
#define SCARD_E_CERTIFICATE_UNAVAILABLE ((DWORD)0x8010002DL)
//
// MessageId: SCARD_E_NO_READERS_AVAILABLE
//
// MessageText:
//
// Cannot find a smart card reader.
//
#define SCARD_E_NO_READERS_AVAILABLE ((DWORD)0x8010002EL)
//
// MessageId: SCARD_E_COMM_DATA_LOST
//
// MessageText:
//
// A communications error with the smart card has been detected. Retry the operation.
//
#define SCARD_E_COMM_DATA_LOST ((DWORD)0x8010002FL)
//
// MessageId: SCARD_E_NO_KEY_CONTAINER
//
// MessageText:
//
// The requested key container does not exist on the smart card.
//
#define SCARD_E_NO_KEY_CONTAINER ((DWORD)0x80100030L)
//
// MessageId: SCARD_E_SERVER_TOO_BUSY
//
// MessageText:
//
// The Smart card resource manager is too busy to complete this operation.
//
#define SCARD_E_SERVER_TOO_BUSY ((DWORD)0x80100031L)
//
// MessageId: SCARD_E_PIN_CACHE_EXPIRED
//
// MessageText:
//
// The smart card PIN cache has expired.
//
#define SCARD_E_PIN_CACHE_EXPIRED ((DWORD)0x80100032L)
//
// MessageId: SCARD_E_NO_PIN_CACHE
//
// MessageText:
//
// The smart card PIN cannot be cached.
//
#define SCARD_E_NO_PIN_CACHE ((DWORD)0x80100033L)
//
// MessageId: SCARD_E_READ_ONLY_CARD
//
// MessageText:
//
// The smart card is read only and cannot be written to.
//
#define SCARD_E_READ_ONLY_CARD ((DWORD)0x80100034L)
//
// These are warning codes.
//
//
// MessageId: SCARD_W_UNSUPPORTED_CARD
//
// MessageText:
//
// The reader cannot communicate with the smart card, due to ATR configuration conflicts.
//
#define SCARD_W_UNSUPPORTED_CARD ((DWORD)0x80100065L)
//
// MessageId: SCARD_W_UNRESPONSIVE_CARD
//
// MessageText:
//
// The smart card is not responding to a reset.
//
#define SCARD_W_UNRESPONSIVE_CARD ((DWORD)0x80100066L)
//
// MessageId: SCARD_W_UNPOWERED_CARD
//
// MessageText:
//
// Power has been removed from the smart card, so that further communication is not possible.
//
#define SCARD_W_UNPOWERED_CARD ((DWORD)0x80100067L)
//
// MessageId: SCARD_W_RESET_CARD
//
// MessageText:
//
// The smart card has been reset, so any shared state information is invalid.
//
#define SCARD_W_RESET_CARD ((DWORD)0x80100068L)
//
// MessageId: SCARD_W_REMOVED_CARD
//
// MessageText:
//
// The smart card has been removed, so that further communication is not possible.
//
#define SCARD_W_REMOVED_CARD ((DWORD)0x80100069L)
//
// MessageId: SCARD_W_SECURITY_VIOLATION
//
// MessageText:
//
// Access was denied because of a security violation.
//
#define SCARD_W_SECURITY_VIOLATION ((DWORD)0x8010006AL)
//
// MessageId: SCARD_W_WRONG_CHV
//
// MessageText:
//
// The card cannot be accessed because the wrong PIN was presented.
//
#define SCARD_W_WRONG_CHV ((DWORD)0x8010006BL)
//
// MessageId: SCARD_W_CHV_BLOCKED
//
// MessageText:
//
// The card cannot be accessed because the maximum number of PIN entry attempts has been reached.
//
#define SCARD_W_CHV_BLOCKED ((DWORD)0x8010006CL)
//
// MessageId: SCARD_W_EOF
//
// MessageText:
//
// The end of the smart card file has been reached.
//
#define SCARD_W_EOF ((DWORD)0x8010006DL)
//
// MessageId: SCARD_W_CANCELLED_BY_USER
//
// MessageText:
//
// The action was cancelled by the user.
//
#define SCARD_W_CANCELLED_BY_USER ((DWORD)0x8010006EL)
//
// MessageId: SCARD_W_CARD_NOT_AUTHENTICATED
//
// MessageText:
//
// No PIN was presented to the smart card.
//
#define SCARD_W_CARD_NOT_AUTHENTICATED ((DWORD)0x8010006FL)
//
// MessageId: SCARD_W_CACHE_ITEM_NOT_FOUND
//
// MessageText:
//
// The requested item could not be found in the cache.
//
#define SCARD_W_CACHE_ITEM_NOT_FOUND ((DWORD)0x80100070L)
//
// MessageId: SCARD_W_CACHE_ITEM_STALE
//
// MessageText:
//
// The requested cache item is too old and was deleted from the cache.
//
#define SCARD_W_CACHE_ITEM_STALE ((DWORD)0x80100071L)
//
// MessageId: SCARD_W_CACHE_ITEM_TOO_BIG
//
// MessageText:
//
// The new cache item exceeds the maximum per-item size defined for the cache.
//
#define SCARD_W_CACHE_ITEM_TOO_BIG ((DWORD)0x80100072L)
#endif // SCARD_S_SUCCESS