winsmcrd.h at [c3a8fe4086]

File build/cackey_win32_build/include/winsmcrd.h artifact 7735605d6f part of check-in c3a8fe4086


/*++

Copyright (c) 1996  Microsoft Corporation

Module Name:

    winsmcrd.h

Abstract:
    Smart Card class/port IOCTL codes. This file is required for all code
    user mode and kernel mode, using Smart Card IOCTL's, defines,
    data structures

Revision History:

--*/


#ifndef _NTDDSCRD_H2_
#define _NTDDSCRD_H2_

#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif

#ifdef __cplusplus
extern "C" {
#endif

#ifdef _WINSCARD_H_
typedef DWORD ULONG;
typedef WORD UWORD;
typedef BYTE UCHAR;
#else
typedef ULONG DWORD;
// typedef UWORD WORD;
typedef UCHAR BYTE;
#endif

#ifndef DEVICE_TYPE_SMARTCARD
#ifndef FILE_DEVICE_SMARTCARD
#define FILE_DEVICE_SMARTCARD           0x00000031
#endif
#else
#if 0x00000031 != FILE_DEVICE_SMARTCARD
#error "Incorrect Smart Card Device Definition"
#endif
#endif


//
// Various constants
//

#define SCARD_ATR_LENGTH 33  // ISO 7816-3 spec.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Protocol Flag definitions
//

#define SCARD_PROTOCOL_UNDEFINED    0x00000000  // There is no active protocol.
#define SCARD_PROTOCOL_T0           0x00000001  // T=0 is the active protocol.
#define SCARD_PROTOCOL_T1           0x00000002  // T=1 is the active protocol.
#define SCARD_PROTOCOL_RAW          0x00010000  // Raw is the active protocol.
//
// This is the mask of ISO defined transmission protocols
//
#define SCARD_PROTOCOL_Tx           (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1)
//
// Use the default transmission parameters / card clock freq.
//
#define SCARD_PROTOCOL_DEFAULT      0x80000000
//
// Use optimal transmission parameters / card clock freq.
// Since using the optimal parameters is the default case no bit is defined to be 1
//
#define SCARD_PROTOCOL_OPTIMAL      0x00000000


//
// Ioctl parameters 1 for IOCTL_SMARTCARD_POWER
//
#define SCARD_POWER_DOWN 0          // Power down the card.
#define SCARD_COLD_RESET 1          // Cycle power and reset the card.
#define SCARD_WARM_RESET 2          // Force a reset on the card.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader Action IOCTLs
//

#define SCARD_CTL_CODE(code)        CTL_CODE(FILE_DEVICE_SMARTCARD, \
                                            (code), \
                                            METHOD_BUFFERED, \
                                            FILE_ANY_ACCESS)

#define IOCTL_SMARTCARD_POWER           SCARD_CTL_CODE( 1)
#define IOCTL_SMARTCARD_GET_ATTRIBUTE   SCARD_CTL_CODE( 2)
#define IOCTL_SMARTCARD_SET_ATTRIBUTE   SCARD_CTL_CODE( 3)
#define IOCTL_SMARTCARD_CONFISCATE      SCARD_CTL_CODE( 4)
#define IOCTL_SMARTCARD_TRANSMIT        SCARD_CTL_CODE( 5)
#define IOCTL_SMARTCARD_EJECT           SCARD_CTL_CODE( 6)
#define IOCTL_SMARTCARD_SWALLOW         SCARD_CTL_CODE( 7)
// #define IOCTL_SMARTCARD_READ            SCARD_CTL_CODE( 8) obsolete
// #define IOCTL_SMARTCARD_WRITE           SCARD_CTL_CODE( 9) obsolete
#define IOCTL_SMARTCARD_IS_PRESENT      SCARD_CTL_CODE(10)
#define IOCTL_SMARTCARD_IS_ABSENT       SCARD_CTL_CODE(11)
#define IOCTL_SMARTCARD_SET_PROTOCOL    SCARD_CTL_CODE(12)
#define IOCTL_SMARTCARD_GET_STATE       SCARD_CTL_CODE(14)
#define IOCTL_SMARTCARD_GET_LAST_ERROR  SCARD_CTL_CODE(15)
#define IOCTL_SMARTCARD_GET_PERF_CNTR   SCARD_CTL_CODE(16)


//
///////////////////////////////////////////////////////////////////////////////
//
// Tags for requesting card and reader attributes
//

#define MAXIMUM_ATTR_STRING_LENGTH 32   // Nothing bigger than this from getAttr
#define MAXIMUM_SMARTCARD_READERS  10   // Limit the readers on the system

#define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag)))

#define SCARD_CLASS_VENDOR_INFO     1   // Vendor information definitions
#define SCARD_CLASS_COMMUNICATIONS  2   // Communication definitions
#define SCARD_CLASS_PROTOCOL        3   // Protocol definitions
#define SCARD_CLASS_POWER_MGMT      4   // Power Management definitions
#define SCARD_CLASS_SECURITY        5   // Security Assurance definitions
#define SCARD_CLASS_MECHANICAL      6   // Mechanical characteristic definitions
#define SCARD_CLASS_VENDOR_DEFINED  7   // Vendor specific definitions
#define SCARD_CLASS_IFD_PROTOCOL    8   // Interface Device Protocol options
#define SCARD_CLASS_ICC_STATE       9   // ICC State specific definitions
#define SCARD_CLASS_PERF       0x7ffe   // performace counters
#define SCARD_CLASS_SYSTEM     0x7fff   // System-specific definitions

#define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100)
#define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101)
#define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102)
#define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103)
#define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110)
#define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
// #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
#define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121)
#define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122)
#define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123)
#define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124)
#define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125)
// #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126)
#define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131)
#define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140)
#define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142)
#define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150)

#define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201)
#define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202)
#define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203)
#define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204)
#define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205)
#define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206)
#define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207)
#define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208)
#define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209)
#define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a)
#define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b)
#define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c)

#define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300)
#define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301)
#define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302)
#define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303)
#define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304)

#define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000)
#define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003)
#define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005)
#define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007)

#define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001)
#define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006)
#define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007)

#define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001)
#define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002)
#define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003)

#ifdef UNICODE
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W
#else
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A
#endif


//
// T=0 Protocol Defines
//

#define SCARD_T0_HEADER_LENGTH 7
#define SCARD_T0_CMD_LENGTH 5


//
// T=1 Protocol Defines
//

#define SCARD_T1_PROLOGUE_LENGTH 3
#define SCARD_T1_EPILOGUE_LENGTH 2
#define SCARD_T1_MAX_IFS 254


//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader states
//

#define SCARD_UNKNOWN     0   // This value implies the driver is unaware
                              // of the current state of the reader.
#define SCARD_ABSENT      1   // This value implies there is no card in
                              // the reader.
#define SCARD_PRESENT     2   // This value implies there is a card is
                              // present in the reader, but that it has
                              // not been moved into position for use.
#define SCARD_SWALLOWED   3   // This value implies there is a card in the
                              // reader in position for use.  The card is
                              // not powered.
#define SCARD_POWERED     4   // This value implies there is power is
                              // being provided to the card, but the
                              // Reader Driver is unaware of the mode of
                              // the card.
#define SCARD_NEGOTIABLE  5   // This value implies the card has been
                              // reset and is awaiting PTS negotiation.
#define SCARD_SPECIFIC    6   // This value implies the card has been
                              // reset and specific communication
                              // protocols have been established.

////////////////////////////////////////////////////////////////////////////////
//
//  I/O Services
//
//      The following services provide access to the I/O capabilities of the
//      reader drivers.  Services of the Smart Card are requested by placing the
//      following structure into the protocol buffer:
//


typedef struct _SCARD_IO_REQUEST{
    DWORD dwProtocol;   // Protocol identifier
    DWORD cbPciLength;  // Protocol Control Information Length
} SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST;
typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST;


//
// T=0 protocol services.
//

typedef struct {
    BYTE
        bCla,   // The instruction class
        bIns,   // The instruction code within the instruction class
        bP1,
        bP2,    // Parameters to the instruction
        bP3;    // Size of I/O Transfer
} SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND;

typedef struct {
    SCARD_IO_REQUEST ioRequest;
    BYTE
        bSw1,
        bSw2;           // Return codes from the instruction
    union
    {
        SCARD_T0_COMMAND CmdBytes;
        BYTE rgbHeader[5];
    } DUMMYUNIONNAME;
} SCARD_T0_REQUEST;

typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST;


//
//  T=1 Protocol Services
//

typedef struct {
    SCARD_IO_REQUEST ioRequest;
} SCARD_T1_REQUEST;
typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST;


//
////////////////////////////////////////////////////////////////////////////////
//
//  Driver attribute flags
//

#define SCARD_READER_SWALLOWS       0x00000001  // Reader has a card swallowing
                                                // mechanism.
#define SCARD_READER_EJECTS         0x00000002  // Reader has a card ejection
                                                // mechanism.
#define SCARD_READER_CONFISCATES    0x00000004  // Reader has a card capture
                                                // mechanism.

//
///////////////////////////////////////////////////////////////////////////////
//
// Type of reader
//
#define SCARD_READER_TYPE_SERIAL    0x01
#define SCARD_READER_TYPE_PARALELL  0x02
#define SCARD_READER_TYPE_KEYBOARD  0x04
#define SCARD_READER_TYPE_SCSI      0x08
#define SCARD_READER_TYPE_IDE       0x10
#define SCARD_READER_TYPE_USB       0x20
#define SCARD_READER_TYPE_PCMCIA    0x40
#define SCARD_READER_TYPE_VENDOR    0xF0

#ifdef __cplusplus
}
#endif
#endif