Index: Makefile.in ================================================================== --- Makefile.in +++ Makefile.in @@ -51,10 +51,12 @@ cp "libcackey.@SHOBJEXT@" "$(DESTDIR)$(libdir)/" -cp "libcackey_g.@SHOBJEXT@" "$(DESTDIR)$(libdir)/" clean: rm -f libcackey.@SHOBJEXT@ libcackey_g.@SHOBJEXT@ + rm -f libcackey.@SHOBJEXT@.def libcackey_g.@SHOBJEXT@.def + rm -f libcackey.@SHOBJEXT@.a libcackey_g.@SHOBJEXT@.a rm -f cackey.o asn1-x509.o cackey_g.o asn1-x509_g.o rm -f test rm -f splint-cackey.txt distclean: clean ADDED build/cackey_win32_build/build.sh Index: build/cackey_win32_build/build.sh ================================================================== --- /dev/null +++ build/cackey_win32_build/build.sh @@ -0,0 +1,1 @@ +./configure --with-pcsc-headers=/home/u4423rsk/devel/pcsc_cac/cackey/build/cackey_win32_build/include --with-pcsc-libs=-L/home/u4423rsk/devel/pcsc_cac/cackey/build/cackey_win32_build/lib -lwinscard --host=i586-mingw32msvc CPPFLAGS="-I/home/u4423rsk/devel/pcsc_cac/cackey/build/cackey_win32_build/include" ADDED build/cackey_win32_build/include/SCardErr.h Index: build/cackey_win32_build/include/SCardErr.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/SCardErr.h @@ -0,0 +1,655 @@ +/* + scarderr.mc + + Error message codes from the Smart Card Resource Manager + These messages must be reconciled with winerror.w + They exist here to provide error messages on pre-Win2K systems. + +*/ +#ifndef SCARD_S_SUCCESS +// +// ============================= +// Facility SCARD Error Messages +// ============================= +// +#define SCARD_S_SUCCESS NO_ERROR +// +// Values are 32 bit values laid out as follows: +// +// 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +---+-+-+-----------------------+-------------------------------+ +// |Sev|C|R| Facility | Code | +// +---+-+-+-----------------------+-------------------------------+ +// +// where +// +// Sev - is the severity code +// +// 00 - Success +// 01 - Informational +// 10 - Warning +// 11 - Error +// +// C - is the Customer code flag +// +// R - is a reserved bit +// +// Facility - is the facility code +// +// Code - is the facility's status code +// +// +// Define the facility codes +// +#define FACILITY_SYSTEM 0x0 +#define FACILITY_SCARD 0x10 + + +// +// Define the severity codes +// +#define STATUS_SEVERITY_WARNING 0x2 +#define STATUS_SEVERITY_INFORMATIONAL 0x1 +#define STATUS_SEVERITY_ERROR 0x3 + + +// +// MessageId: SCARD_F_INTERNAL_ERROR +// +// MessageText: +// +// An internal consistency check failed. +// +#define SCARD_F_INTERNAL_ERROR ((DWORD)0x80100001L) + +// +// MessageId: SCARD_E_CANCELLED +// +// MessageText: +// +// The action was cancelled by an SCardCancel request. +// +#define SCARD_E_CANCELLED ((DWORD)0x80100002L) + +// +// MessageId: SCARD_E_INVALID_HANDLE +// +// MessageText: +// +// The supplied handle was invalid. +// +#define SCARD_E_INVALID_HANDLE ((DWORD)0x80100003L) + +// +// MessageId: SCARD_E_INVALID_PARAMETER +// +// MessageText: +// +// One or more of the supplied parameters could not be properly interpreted. +// +#define SCARD_E_INVALID_PARAMETER ((DWORD)0x80100004L) + +// +// MessageId: SCARD_E_INVALID_TARGET +// +// MessageText: +// +// Registry startup information is missing or invalid. +// +#define SCARD_E_INVALID_TARGET ((DWORD)0x80100005L) + +// +// MessageId: SCARD_E_NO_MEMORY +// +// MessageText: +// +// Not enough memory available to complete this command. +// +#define SCARD_E_NO_MEMORY ((DWORD)0x80100006L) + +// +// MessageId: SCARD_F_WAITED_TOO_LONG +// +// MessageText: +// +// An internal consistency timer has expired. +// +#define SCARD_F_WAITED_TOO_LONG ((DWORD)0x80100007L) + +// +// MessageId: SCARD_E_INSUFFICIENT_BUFFER +// +// MessageText: +// +// The data buffer to receive returned data is too small for the returned data. +// +#define SCARD_E_INSUFFICIENT_BUFFER ((DWORD)0x80100008L) + +// +// MessageId: SCARD_E_UNKNOWN_READER +// +// MessageText: +// +// The specified reader name is not recognized. +// +#define SCARD_E_UNKNOWN_READER ((DWORD)0x80100009L) + +// +// MessageId: SCARD_E_TIMEOUT +// +// MessageText: +// +// The user-specified timeout value has expired. +// +#define SCARD_E_TIMEOUT ((DWORD)0x8010000AL) + +// +// MessageId: SCARD_E_SHARING_VIOLATION +// +// MessageText: +// +// The smart card cannot be accessed because of other connections outstanding. +// +#define SCARD_E_SHARING_VIOLATION ((DWORD)0x8010000BL) + +// +// MessageId: SCARD_E_NO_SMARTCARD +// +// MessageText: +// +// The operation requires a Smart Card, but no Smart Card is currently in the device. +// +#define SCARD_E_NO_SMARTCARD ((DWORD)0x8010000CL) + +// +// MessageId: SCARD_E_UNKNOWN_CARD +// +// MessageText: +// +// The specified smart card name is not recognized. +// +#define SCARD_E_UNKNOWN_CARD ((DWORD)0x8010000DL) + +// +// MessageId: SCARD_E_CANT_DISPOSE +// +// MessageText: +// +// The system could not dispose of the media in the requested manner. +// +#define SCARD_E_CANT_DISPOSE ((DWORD)0x8010000EL) + +// +// MessageId: SCARD_E_PROTO_MISMATCH +// +// MessageText: +// +// The requested protocols are incompatible with the protocol currently in use with the smart card. +// +#define SCARD_E_PROTO_MISMATCH ((DWORD)0x8010000FL) + +// +// MessageId: SCARD_E_NOT_READY +// +// MessageText: +// +// The reader or smart card is not ready to accept commands. +// +#define SCARD_E_NOT_READY ((DWORD)0x80100010L) + +// +// MessageId: SCARD_E_INVALID_VALUE +// +// MessageText: +// +// One or more of the supplied parameters values could not be properly interpreted. +// +#define SCARD_E_INVALID_VALUE ((DWORD)0x80100011L) + +// +// MessageId: SCARD_E_SYSTEM_CANCELLED +// +// MessageText: +// +// The action was cancelled by the system, presumably to log off or shut down. +// +#define SCARD_E_SYSTEM_CANCELLED ((DWORD)0x80100012L) + +// +// MessageId: SCARD_F_COMM_ERROR +// +// MessageText: +// +// An internal communications error has been detected. +// +#define SCARD_F_COMM_ERROR ((DWORD)0x80100013L) + +// +// MessageId: SCARD_F_UNKNOWN_ERROR +// +// MessageText: +// +// An internal error has been detected, but the source is unknown. +// +#define SCARD_F_UNKNOWN_ERROR ((DWORD)0x80100014L) + +// +// MessageId: SCARD_E_INVALID_ATR +// +// MessageText: +// +// An ATR obtained from the registry is not a valid ATR string. +// +#define SCARD_E_INVALID_ATR ((DWORD)0x80100015L) + +// +// MessageId: SCARD_E_NOT_TRANSACTED +// +// MessageText: +// +// An attempt was made to end a non-existent transaction. +// +#define SCARD_E_NOT_TRANSACTED ((DWORD)0x80100016L) + +// +// MessageId: SCARD_E_READER_UNAVAILABLE +// +// MessageText: +// +// The specified reader is not currently available for use. +// +#define SCARD_E_READER_UNAVAILABLE ((DWORD)0x80100017L) + +// +// MessageId: SCARD_P_SHUTDOWN +// +// MessageText: +// +// The operation has been aborted to allow the server application to exit. +// +#define SCARD_P_SHUTDOWN ((DWORD)0x80100018L) + +// +// MessageId: SCARD_E_PCI_TOO_SMALL +// +// MessageText: +// +// The PCI Receive buffer was too small. +// +#define SCARD_E_PCI_TOO_SMALL ((DWORD)0x80100019L) + +// +// MessageId: SCARD_E_READER_UNSUPPORTED +// +// MessageText: +// +// The reader driver does not meet minimal requirements for support. +// +#define SCARD_E_READER_UNSUPPORTED ((DWORD)0x8010001AL) + +// +// MessageId: SCARD_E_DUPLICATE_READER +// +// MessageText: +// +// The reader driver did not produce a unique reader name. +// +#define SCARD_E_DUPLICATE_READER ((DWORD)0x8010001BL) + +// +// MessageId: SCARD_E_CARD_UNSUPPORTED +// +// MessageText: +// +// The smart card does not meet minimal requirements for support. +// +#define SCARD_E_CARD_UNSUPPORTED ((DWORD)0x8010001CL) + +// +// MessageId: SCARD_E_NO_SERVICE +// +// MessageText: +// +// The Smart card resource manager is not running. +// +#define SCARD_E_NO_SERVICE ((DWORD)0x8010001DL) + +// +// MessageId: SCARD_E_SERVICE_STOPPED +// +// MessageText: +// +// The Smart card resource manager has shut down. +// +#define SCARD_E_SERVICE_STOPPED ((DWORD)0x8010001EL) + +// +// MessageId: SCARD_E_UNEXPECTED +// +// MessageText: +// +// An unexpected card error has occurred. +// +#define SCARD_E_UNEXPECTED ((DWORD)0x8010001FL) + +// +// MessageId: SCARD_E_ICC_INSTALLATION +// +// MessageText: +// +// No Primary Provider can be found for the smart card. +// +#define SCARD_E_ICC_INSTALLATION ((DWORD)0x80100020L) + +// +// MessageId: SCARD_E_ICC_CREATEORDER +// +// MessageText: +// +// The requested order of object creation is not supported. +// +#define SCARD_E_ICC_CREATEORDER ((DWORD)0x80100021L) + +// +// MessageId: SCARD_E_UNSUPPORTED_FEATURE +// +// MessageText: +// +// This smart card does not support the requested feature. +// +#define SCARD_E_UNSUPPORTED_FEATURE ((DWORD)0x80100022L) + +// +// MessageId: SCARD_E_DIR_NOT_FOUND +// +// MessageText: +// +// The identified directory does not exist in the smart card. +// +#define SCARD_E_DIR_NOT_FOUND ((DWORD)0x80100023L) + +// +// MessageId: SCARD_E_FILE_NOT_FOUND +// +// MessageText: +// +// The identified file does not exist in the smart card. +// +#define SCARD_E_FILE_NOT_FOUND ((DWORD)0x80100024L) + +// +// MessageId: SCARD_E_NO_DIR +// +// MessageText: +// +// The supplied path does not represent a smart card directory. +// +#define SCARD_E_NO_DIR ((DWORD)0x80100025L) + +// +// MessageId: SCARD_E_NO_FILE +// +// MessageText: +// +// The supplied path does not represent a smart card file. +// +#define SCARD_E_NO_FILE ((DWORD)0x80100026L) + +// +// MessageId: SCARD_E_NO_ACCESS +// +// MessageText: +// +// Access is denied to this file. +// +#define SCARD_E_NO_ACCESS ((DWORD)0x80100027L) + +// +// MessageId: SCARD_E_WRITE_TOO_MANY +// +// MessageText: +// +// The smartcard does not have enough memory to store the information. +// +#define SCARD_E_WRITE_TOO_MANY ((DWORD)0x80100028L) + +// +// MessageId: SCARD_E_BAD_SEEK +// +// MessageText: +// +// There was an error trying to set the smart card file object pointer. +// +#define SCARD_E_BAD_SEEK ((DWORD)0x80100029L) + +// +// MessageId: SCARD_E_INVALID_CHV +// +// MessageText: +// +// The supplied PIN is incorrect. +// +#define SCARD_E_INVALID_CHV ((DWORD)0x8010002AL) + +// +// MessageId: SCARD_E_UNKNOWN_RES_MNG +// +// MessageText: +// +// An unrecognized error code was returned from a layered component. +// +#define SCARD_E_UNKNOWN_RES_MNG ((DWORD)0x8010002BL) + +// +// MessageId: SCARD_E_NO_SUCH_CERTIFICATE +// +// MessageText: +// +// The requested certificate does not exist. +// +#define SCARD_E_NO_SUCH_CERTIFICATE ((DWORD)0x8010002CL) + +// +// MessageId: SCARD_E_CERTIFICATE_UNAVAILABLE +// +// MessageText: +// +// The requested certificate could not be obtained. +// +#define SCARD_E_CERTIFICATE_UNAVAILABLE ((DWORD)0x8010002DL) + +// +// MessageId: SCARD_E_NO_READERS_AVAILABLE +// +// MessageText: +// +// Cannot find a smart card reader. +// +#define SCARD_E_NO_READERS_AVAILABLE ((DWORD)0x8010002EL) + +// +// MessageId: SCARD_E_COMM_DATA_LOST +// +// MessageText: +// +// A communications error with the smart card has been detected. Retry the operation. +// +#define SCARD_E_COMM_DATA_LOST ((DWORD)0x8010002FL) + +// +// MessageId: SCARD_E_NO_KEY_CONTAINER +// +// MessageText: +// +// The requested key container does not exist on the smart card. +// +#define SCARD_E_NO_KEY_CONTAINER ((DWORD)0x80100030L) + +// +// MessageId: SCARD_E_SERVER_TOO_BUSY +// +// MessageText: +// +// The Smart card resource manager is too busy to complete this operation. +// +#define SCARD_E_SERVER_TOO_BUSY ((DWORD)0x80100031L) + +// +// MessageId: SCARD_E_PIN_CACHE_EXPIRED +// +// MessageText: +// +// The smart card PIN cache has expired. +// +#define SCARD_E_PIN_CACHE_EXPIRED ((DWORD)0x80100032L) + +// +// MessageId: SCARD_E_NO_PIN_CACHE +// +// MessageText: +// +// The smart card PIN cannot be cached. +// +#define SCARD_E_NO_PIN_CACHE ((DWORD)0x80100033L) + +// +// MessageId: SCARD_E_READ_ONLY_CARD +// +// MessageText: +// +// The smart card is read only and cannot be written to. +// +#define SCARD_E_READ_ONLY_CARD ((DWORD)0x80100034L) + +// +// These are warning codes. +// +// +// MessageId: SCARD_W_UNSUPPORTED_CARD +// +// MessageText: +// +// The reader cannot communicate with the smart card, due to ATR configuration conflicts. +// +#define SCARD_W_UNSUPPORTED_CARD ((DWORD)0x80100065L) + +// +// MessageId: SCARD_W_UNRESPONSIVE_CARD +// +// MessageText: +// +// The smart card is not responding to a reset. +// +#define SCARD_W_UNRESPONSIVE_CARD ((DWORD)0x80100066L) + +// +// MessageId: SCARD_W_UNPOWERED_CARD +// +// MessageText: +// +// Power has been removed from the smart card, so that further communication is not possible. +// +#define SCARD_W_UNPOWERED_CARD ((DWORD)0x80100067L) + +// +// MessageId: SCARD_W_RESET_CARD +// +// MessageText: +// +// The smart card has been reset, so any shared state information is invalid. +// +#define SCARD_W_RESET_CARD ((DWORD)0x80100068L) + +// +// MessageId: SCARD_W_REMOVED_CARD +// +// MessageText: +// +// The smart card has been removed, so that further communication is not possible. +// +#define SCARD_W_REMOVED_CARD ((DWORD)0x80100069L) + +// +// MessageId: SCARD_W_SECURITY_VIOLATION +// +// MessageText: +// +// Access was denied because of a security violation. +// +#define SCARD_W_SECURITY_VIOLATION ((DWORD)0x8010006AL) + +// +// MessageId: SCARD_W_WRONG_CHV +// +// MessageText: +// +// The card cannot be accessed because the wrong PIN was presented. +// +#define SCARD_W_WRONG_CHV ((DWORD)0x8010006BL) + +// +// MessageId: SCARD_W_CHV_BLOCKED +// +// MessageText: +// +// The card cannot be accessed because the maximum number of PIN entry attempts has been reached. +// +#define SCARD_W_CHV_BLOCKED ((DWORD)0x8010006CL) + +// +// MessageId: SCARD_W_EOF +// +// MessageText: +// +// The end of the smart card file has been reached. +// +#define SCARD_W_EOF ((DWORD)0x8010006DL) + +// +// MessageId: SCARD_W_CANCELLED_BY_USER +// +// MessageText: +// +// The action was cancelled by the user. +// +#define SCARD_W_CANCELLED_BY_USER ((DWORD)0x8010006EL) + +// +// MessageId: SCARD_W_CARD_NOT_AUTHENTICATED +// +// MessageText: +// +// No PIN was presented to the smart card. +// +#define SCARD_W_CARD_NOT_AUTHENTICATED ((DWORD)0x8010006FL) + +// +// MessageId: SCARD_W_CACHE_ITEM_NOT_FOUND +// +// MessageText: +// +// The requested item could not be found in the cache. +// +#define SCARD_W_CACHE_ITEM_NOT_FOUND ((DWORD)0x80100070L) + +// +// MessageId: SCARD_W_CACHE_ITEM_STALE +// +// MessageText: +// +// The requested cache item is too old and was deleted from the cache. +// +#define SCARD_W_CACHE_ITEM_STALE ((DWORD)0x80100071L) + +// +// MessageId: SCARD_W_CACHE_ITEM_TOO_BIG +// +// MessageText: +// +// The new cache item exceeds the maximum per-item size defined for the cache. +// +#define SCARD_W_CACHE_ITEM_TOO_BIG ((DWORD)0x80100072L) + +#endif // SCARD_S_SUCCESS + ADDED build/cackey_win32_build/include/pcsclite.h Index: build/cackey_win32_build/include/pcsclite.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/pcsclite.h @@ -0,0 +1,1 @@ +#include ADDED build/cackey_win32_build/include/pthread.h Index: build/cackey_win32_build/include/pthread.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/pthread.h @@ -0,0 +1,53 @@ +/* Thread_emulation.h */ +/* Author: Johnson M. Hart */ +/* Emulate the Pthreads model for the Win32 platform */ +/* The emulation is not complete, but it does provide a subset */ +/* required for a first project */ +/* Source: http://world.std.com/~jmhart/opensource.htm */ +/* The emulation is not complete, but it does provide a subset */ +/* that will work with many well-behaved programs */ +/* IF YOU ARE REALLY SERIOUS ABOUT THIS, USE THE OPEN SOURCE */ +/* PTHREAD LIBRARY. YOU'LL FIND IT ON THE RED HAT SITE */ + +#ifndef _THREAD_EMULATION +# define _THREAD_EMULATION + +/* Thread management macros */ +# ifdef _WIN32 +# define _WIN32_WINNT 0x500 /* WINBASE.H - Enable SignalObjectAndWait */ +# include +# include +# define THREAD_FUNCTION_PROTO THREAD_FUNCTION_RETURN (__stdcall *) (void *) +# define THREAD_FUNCTION_RETURN unsigned int +# define THREAD_SPECIFIC_INDEX DWORD +# define pthread_t HANDLE +# define pthread_attr_t DWORD +# define pthread_create(thhandle, attr, thfunc, tharg) ((int) ((*thhandle = (HANDLE) _beginthreadex(NULL, 0, (THREAD_FUNCTION_PROTO) thfunc, tharg, 0, NULL)) == NULL)) +# define pthread_join(thread, result) ((WaitForSingleObject((thread), INFINITE) != WAIT_OBJECT_0) || !CloseHandle(thread)) +# define pthread_detach(thread) { if (((void *) thread) != NULL) { CloseHandle((void *) thread); }} +# define thread_sleep(nms) Sleep(nms) +# define pthread_cancel(thread) TerminateThread(thread, 0) +# define ts_key_create(ts_key, destructor) {ts_key = TlsAlloc();} +# define pthread_getspecific(ts_key) TlsGetValue(ts_key) +# define pthread_setspecific(ts_key, value) TlsSetValue(ts_key, (void *)value) +# define pthread_self() GetCurrentThreadId() +# else +# include +# define THREAD_FUNCTION_RETURN void * +# endif + +/* Syncrhronization macros: Win32->pthread */ +# ifdef _WIN32 +# define pthread_mutex_t HANDLE +# define pthread_cond_t HANDLE +# define pthread_mutex_lock(pobject) WaitForSingleObject(*pobject, INFINITE) +# define pthread_mutex_unlock(pobject) (!ReleaseMutex(*pobject)) +# define pthread_mutex_init(pobject,pattr) ((*pobject=CreateMutex(NULL, FALSE, NULL)) == NULL) +# define pthread_cond_init(pobject,pattr) (*pobject=CreateEvent(NULL, FALSE, FALSE, NULL)) +# define pthread_mutex_destroy(pobject) CloseHandle(*pobject) +# define pthread_cond_destroy(pobject) CloseHandle(*pobject) +# define pthread_cond_wait(pcv,pmutex) { SignalObjectAndWait(*pmutex, *pcv, INFINITE, FALSE); WaitForSingleObject(*pmutex, INFINITE); } +# define pthread_cond_signal(pcv) SetEvent(*pcv) +# endif + +#endif ADDED build/cackey_win32_build/include/winscard.h Index: build/cackey_win32_build/include/winscard.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/winscard.h @@ -0,0 +1,1148 @@ +/*++ + +Copyright (c) 1996 Microsoft Corporation + +Module Name: + + WinSCard + +Abstract: + + This header file provides the definitions and symbols necessary for an + Application or Smart Card Service Provider to access the Smartcard + Subsystem. + +Environment: + + Win32 + +Notes: + +--*/ + +#ifndef _WINSCARD_H_ +#define _WINSCARD_H_ + +#if defined (_MSC_VER) && (_MSC_VER >= 1020) +#pragma once +#endif + + +#include +#include +#include +#include "winsmcrd.h" +#ifndef SCARD_S_SUCCESS +#include "SCardErr.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + + +#if 1 /* jkm */ +#ifndef __LPCGUID_DEFINED__ +#define __LPCGUID_DEFINED__ +typedef const GUID *LPCGUID; +#endif +#endif + +#ifndef _LPCBYTE_DEFINED +#define _LPCBYTE_DEFINED +typedef const BYTE *LPCBYTE; +#endif +#ifndef _LPCVOID_DEFINED +#define _LPCVOID_DEFINED +typedef const VOID *LPCVOID; +#endif + +#ifndef WINSCARDAPI +#define WINSCARDAPI +#endif +#ifndef WINSCARDDATA +#define WINSCARDDATA __declspec(dllimport) +#endif + +/* In clr:pure we cannot mark data export with dllimport. + * We should add small functions which returns the value of + * the global. + */ +#if !defined(_M_CEE_PURE) +WINSCARDDATA extern const SCARD_IO_REQUEST + g_rgSCardT0Pci, + g_rgSCardT1Pci, + g_rgSCardRawPci; +#define SCARD_PCI_T0 (&g_rgSCardT0Pci) +#define SCARD_PCI_T1 (&g_rgSCardT1Pci) +#define SCARD_PCI_RAW (&g_rgSCardRawPci) +#endif + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Service Manager Access Services +// +// The following services are used to manage user and terminal contexts for +// Smart Cards. +// + +typedef ULONG_PTR SCARDCONTEXT; +typedef SCARDCONTEXT *PSCARDCONTEXT, *LPSCARDCONTEXT; + +typedef ULONG_PTR SCARDHANDLE; +typedef SCARDHANDLE *PSCARDHANDLE, *LPSCARDHANDLE; + +#define SCARD_AUTOALLOCATE (DWORD)(-1) + +#define SCARD_SCOPE_USER 0 // The context is a user context, and any + // database operations are performed within the + // domain of the user. +#define SCARD_SCOPE_TERMINAL 1 // The context is that of the current terminal, + // and any database operations are performed + // within the domain of that terminal. (The + // calling application must have appropriate + // access permissions for any database actions.) +#define SCARD_SCOPE_SYSTEM 2 // The context is the system context, and any + // database operations are performed within the + // domain of the system. (The calling + // application must have appropriate access + // permissions for any database actions.) + +extern WINSCARDAPI LONG WINAPI +SCardEstablishContext( + DWORD dwScope, + LPCVOID pvReserved1, + LPCVOID pvReserved2, + LPSCARDCONTEXT phContext); + +extern WINSCARDAPI LONG WINAPI +SCardReleaseContext( + SCARDCONTEXT hContext); + +extern WINSCARDAPI LONG WINAPI +SCardIsValidContext( + SCARDCONTEXT hContext); + + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Smart Card Database Management Services +// +// The following services provide for managing the Smart Card Database. +// + +#define SCARD_ALL_READERS TEXT("SCard$AllReaders\000") +#define SCARD_DEFAULT_READERS TEXT("SCard$DefaultReaders\000") +#define SCARD_LOCAL_READERS TEXT("SCard$LocalReaders\000") +#define SCARD_SYSTEM_READERS TEXT("SCard$SystemReaders\000") + +#define SCARD_PROVIDER_PRIMARY 1 // Primary Provider Id +#define SCARD_PROVIDER_CSP 2 // Crypto Service Provider Id +#define SCARD_PROVIDER_KSP 3 // Key Storage Provider Id + + +// +// Database Reader routines +// + +extern WINSCARDAPI LONG WINAPI +SCardListReaderGroupsA( + SCARDCONTEXT hContext, + LPSTR mszGroups, + LPDWORD pcchGroups); +extern WINSCARDAPI LONG WINAPI +SCardListReaderGroupsW( + SCARDCONTEXT hContext, + LPWSTR mszGroups, + LPDWORD pcchGroups); +#ifdef UNICODE +#define SCardListReaderGroups SCardListReaderGroupsW +#else +#define SCardListReaderGroups SCardListReaderGroupsA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardListReadersA( + SCARDCONTEXT hContext, + LPCSTR mszGroups, + LPSTR mszReaders, + LPDWORD pcchReaders); +extern WINSCARDAPI LONG WINAPI +SCardListReadersW( + SCARDCONTEXT hContext, + LPCWSTR mszGroups, + LPWSTR mszReaders, + LPDWORD pcchReaders); +#ifdef UNICODE +#define SCardListReaders SCardListReadersW +#else +#define SCardListReaders SCardListReadersA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardListCardsA( + SCARDCONTEXT hContext, + LPCBYTE pbAtr, + LPCGUID rgquidInterfaces, + DWORD cguidInterfaceCount, + LPSTR mszCards, + LPDWORD pcchCards); +extern WINSCARDAPI LONG WINAPI +SCardListCardsW( + SCARDCONTEXT hContext, + LPCBYTE pbAtr, + LPCGUID rgquidInterfaces, + DWORD cguidInterfaceCount, + LPWSTR mszCards, + LPDWORD pcchCards); +#ifdef UNICODE +#define SCardListCards SCardListCardsW +#else +#define SCardListCards SCardListCardsA +#endif // !UNICODE +// +// NOTE: The routine SCardListCards name differs from the PC/SC definition. +// It should be: +// +// extern WINSCARDAPI LONG WINAPI +// SCardListCardTypes( +// SCARDCONTEXT hContext, +// LPCBYTE pbAtr, +// LPCGUID rgquidInterfaces, +// DWORD cguidInterfaceCount, +// LPTSTR mszCards, +// out LPDWORD pcchCards); +// +// Here's a work-around MACRO: +#define SCardListCardTypes SCardListCards + +extern WINSCARDAPI LONG WINAPI +SCardListInterfacesA( + SCARDCONTEXT hContext, + LPCSTR szCard, + LPGUID pguidInterfaces, + LPDWORD pcguidInterfaces); +extern WINSCARDAPI LONG WINAPI +SCardListInterfacesW( + SCARDCONTEXT hContext, + LPCWSTR szCard, + LPGUID pguidInterfaces, + LPDWORD pcguidInterfaces); +#ifdef UNICODE +#define SCardListInterfaces SCardListInterfacesW +#else +#define SCardListInterfaces SCardListInterfacesA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardGetProviderIdA( + SCARDCONTEXT hContext, + LPCSTR szCard, + LPGUID pguidProviderId); +extern WINSCARDAPI LONG WINAPI +SCardGetProviderIdW( + SCARDCONTEXT hContext, + LPCWSTR szCard, + LPGUID pguidProviderId); +#ifdef UNICODE +#define SCardGetProviderId SCardGetProviderIdW +#else +#define SCardGetProviderId SCardGetProviderIdA +#endif // !UNICODE +// +// NOTE: The routine SCardGetProviderId in this implementation uses GUIDs. +// The PC/SC definition uses BYTEs. +// + +extern WINSCARDAPI LONG WINAPI +SCardGetCardTypeProviderNameA( + SCARDCONTEXT hContext, + LPCSTR szCardName, + DWORD dwProviderId, + LPSTR szProvider, + LPDWORD pcchProvider); +extern WINSCARDAPI LONG WINAPI +SCardGetCardTypeProviderNameW( + SCARDCONTEXT hContext, + LPCWSTR szCardName, + DWORD dwProviderId, + LPWSTR szProvider, + LPDWORD pcchProvider); +#ifdef UNICODE +#define SCardGetCardTypeProviderName SCardGetCardTypeProviderNameW +#else +#define SCardGetCardTypeProviderName SCardGetCardTypeProviderNameA +#endif // !UNICODE +// +// NOTE: This routine is an extension to the PC/SC definitions. +// + + +// +// Database Writer routines +// + +extern WINSCARDAPI LONG WINAPI +SCardIntroduceReaderGroupA( + SCARDCONTEXT hContext, + LPCSTR szGroupName); +extern WINSCARDAPI LONG WINAPI +SCardIntroduceReaderGroupW( + SCARDCONTEXT hContext, + LPCWSTR szGroupName); +#ifdef UNICODE +#define SCardIntroduceReaderGroup SCardIntroduceReaderGroupW +#else +#define SCardIntroduceReaderGroup SCardIntroduceReaderGroupA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardForgetReaderGroupA( + SCARDCONTEXT hContext, + LPCSTR szGroupName); +extern WINSCARDAPI LONG WINAPI +SCardForgetReaderGroupW( + SCARDCONTEXT hContext, + LPCWSTR szGroupName); +#ifdef UNICODE +#define SCardForgetReaderGroup SCardForgetReaderGroupW +#else +#define SCardForgetReaderGroup SCardForgetReaderGroupA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardIntroduceReaderA( + SCARDCONTEXT hContext, + LPCSTR szReaderName, + LPCSTR szDeviceName); +extern WINSCARDAPI LONG WINAPI +SCardIntroduceReaderW( + SCARDCONTEXT hContext, + LPCWSTR szReaderName, + LPCWSTR szDeviceName); +#ifdef UNICODE +#define SCardIntroduceReader SCardIntroduceReaderW +#else +#define SCardIntroduceReader SCardIntroduceReaderA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardForgetReaderA( + SCARDCONTEXT hContext, + LPCSTR szReaderName); +extern WINSCARDAPI LONG WINAPI +SCardForgetReaderW( + SCARDCONTEXT hContext, + LPCWSTR szReaderName); +#ifdef UNICODE +#define SCardForgetReader SCardForgetReaderW +#else +#define SCardForgetReader SCardForgetReaderA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardAddReaderToGroupA( + SCARDCONTEXT hContext, + LPCSTR szReaderName, + LPCSTR szGroupName); +extern WINSCARDAPI LONG WINAPI +SCardAddReaderToGroupW( + SCARDCONTEXT hContext, + LPCWSTR szReaderName, + LPCWSTR szGroupName); +#ifdef UNICODE +#define SCardAddReaderToGroup SCardAddReaderToGroupW +#else +#define SCardAddReaderToGroup SCardAddReaderToGroupA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardRemoveReaderFromGroupA( + SCARDCONTEXT hContext, + LPCSTR szReaderName, + LPCSTR szGroupName); +extern WINSCARDAPI LONG WINAPI +SCardRemoveReaderFromGroupW( + SCARDCONTEXT hContext, + LPCWSTR szReaderName, + LPCWSTR szGroupName); +#ifdef UNICODE +#define SCardRemoveReaderFromGroup SCardRemoveReaderFromGroupW +#else +#define SCardRemoveReaderFromGroup SCardRemoveReaderFromGroupA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardIntroduceCardTypeA( + SCARDCONTEXT hContext, + LPCSTR szCardName, + LPCGUID pguidPrimaryProvider, + LPCGUID rgguidInterfaces, + DWORD dwInterfaceCount, + LPCBYTE pbAtr, + LPCBYTE pbAtrMask, + DWORD cbAtrLen); +extern WINSCARDAPI LONG WINAPI +SCardIntroduceCardTypeW( + SCARDCONTEXT hContext, + LPCWSTR szCardName, + LPCGUID pguidPrimaryProvider, + LPCGUID rgguidInterfaces, + DWORD dwInterfaceCount, + LPCBYTE pbAtr, + LPCBYTE pbAtrMask, + DWORD cbAtrLen); +#ifdef UNICODE +#define SCardIntroduceCardType SCardIntroduceCardTypeW +#else +#define SCardIntroduceCardType SCardIntroduceCardTypeA +#endif // !UNICODE +// +// NOTE: The routine SCardIntroduceCardType's parameters' order differs from +// the PC/SC definition. It should be: +// +// extern WINSCARDAPI LONG WINAPI +// SCardIntroduceCardType( +// SCARDCONTEXT hContext, +// LPCTSTR szCardName, +// LPCBYTE pbAtr, +// LPCBYTE pbAtrMask, +// DWORD cbAtrLen, +// LPCGUID pguidPrimaryProvider, +// LPCGUID rgguidInterfaces, +// DWORD dwInterfaceCount); +// +// Here's a work-around MACRO: +#define PCSCardIntroduceCardType(hContext, szCardName, pbAtr, pbAtrMask, cbAtrLen, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount) \ + SCardIntroduceCardType(hContext, szCardName, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount, pbAtr, pbAtrMask, cbAtrLen) + +extern WINSCARDAPI LONG WINAPI +SCardSetCardTypeProviderNameA( + SCARDCONTEXT hContext, + LPCSTR szCardName, + DWORD dwProviderId, + LPCSTR szProvider); +extern WINSCARDAPI LONG WINAPI +SCardSetCardTypeProviderNameW( + SCARDCONTEXT hContext, + LPCWSTR szCardName, + DWORD dwProviderId, + LPCWSTR szProvider); +#ifdef UNICODE +#define SCardSetCardTypeProviderName SCardSetCardTypeProviderNameW +#else +#define SCardSetCardTypeProviderName SCardSetCardTypeProviderNameA +#endif // !UNICODE +// +// NOTE: This routine is an extention to the PC/SC specifications. +// + +extern WINSCARDAPI LONG WINAPI +SCardForgetCardTypeA( + SCARDCONTEXT hContext, + LPCSTR szCardName); +extern WINSCARDAPI LONG WINAPI +SCardForgetCardTypeW( + SCARDCONTEXT hContext, + LPCWSTR szCardName); +#ifdef UNICODE +#define SCardForgetCardType SCardForgetCardTypeW +#else +#define SCardForgetCardType SCardForgetCardTypeA +#endif // !UNICODE + + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Service Manager Support Routines +// +// The following services are supplied to simplify the use of the Service +// Manager API. +// + +extern WINSCARDAPI LONG WINAPI +SCardFreeMemory( + SCARDCONTEXT hContext, + LPCVOID pvMem); + +#if (NTDDI_VERSION >= NTDDI_WINXP) +extern WINSCARDAPI HANDLE WINAPI +SCardAccessStartedEvent(void); + +extern WINSCARDAPI void WINAPI +SCardReleaseStartedEvent(void); +#endif // (NTDDI_VERSION >= NTDDI_WINXP) + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Reader Services +// +// The following services supply means for tracking cards within readers. +// + +typedef struct { + LPCSTR szReader; // reader name + LPVOID pvUserData; // user defined data + DWORD dwCurrentState; // current state of reader at time of call + DWORD dwEventState; // state of reader after state change + DWORD cbAtr; // Number of bytes in the returned ATR. + BYTE rgbAtr[36]; // Atr of inserted card, (extra alignment bytes) +} SCARD_READERSTATEA, *PSCARD_READERSTATEA, *LPSCARD_READERSTATEA; +typedef struct { + LPCWSTR szReader; // reader name + LPVOID pvUserData; // user defined data + DWORD dwCurrentState; // current state of reader at time of call + DWORD dwEventState; // state of reader after state change + DWORD cbAtr; // Number of bytes in the returned ATR. + BYTE rgbAtr[36]; // Atr of inserted card, (extra alignment bytes) +} SCARD_READERSTATEW, *PSCARD_READERSTATEW, *LPSCARD_READERSTATEW; +#ifdef UNICODE +typedef SCARD_READERSTATEW SCARD_READERSTATE; +typedef PSCARD_READERSTATEW PSCARD_READERSTATE; +typedef LPSCARD_READERSTATEW LPSCARD_READERSTATE; +#else +typedef SCARD_READERSTATEA SCARD_READERSTATE; +typedef PSCARD_READERSTATEA PSCARD_READERSTATE; +typedef LPSCARD_READERSTATEA LPSCARD_READERSTATE; +#endif // UNICODE + +// Backwards compatibility macros +#define SCARD_READERSTATE_A SCARD_READERSTATEA +#define SCARD_READERSTATE_W SCARD_READERSTATEW +#define PSCARD_READERSTATE_A PSCARD_READERSTATEA +#define PSCARD_READERSTATE_W PSCARD_READERSTATEW +#define LPSCARD_READERSTATE_A LPSCARD_READERSTATEA +#define LPSCARD_READERSTATE_W LPSCARD_READERSTATEW + +#define SCARD_STATE_UNAWARE 0x00000000 // The application is unaware of the + // current state, and would like to + // know. The use of this value + // results in an immediate return + // from state transition monitoring + // services. This is represented by + // all bits set to zero. +#define SCARD_STATE_IGNORE 0x00000001 // The application requested that + // this reader be ignored. No other + // bits will be set. +#define SCARD_STATE_CHANGED 0x00000002 // This implies that there is a + // difference between the state + // believed by the application, and + // the state known by the Service + // Manager. When this bit is set, + // the application may assume a + // significant state change has + // occurred on this reader. +#define SCARD_STATE_UNKNOWN 0x00000004 // This implies that the given + // reader name is not recognized by + // the Service Manager. If this bit + // is set, then SCARD_STATE_CHANGED + // and SCARD_STATE_IGNORE will also + // be set. +#define SCARD_STATE_UNAVAILABLE 0x00000008 // This implies that the actual + // state of this reader is not + // available. If this bit is set, + // then all the following bits are + // clear. +#define SCARD_STATE_EMPTY 0x00000010 // This implies that there is not + // card in the reader. If this bit + // is set, all the following bits + // will be clear. +#define SCARD_STATE_PRESENT 0x00000020 // This implies that there is a card + // in the reader. +#define SCARD_STATE_ATRMATCH 0x00000040 // This implies that there is a card + // in the reader with an ATR + // matching one of the target cards. + // If this bit is set, + // SCARD_STATE_PRESENT will also be + // set. This bit is only returned + // on the SCardLocateCard() service. +#define SCARD_STATE_EXCLUSIVE 0x00000080 // This implies that the card in the + // reader is allocated for exclusive + // use by another application. If + // this bit is set, + // SCARD_STATE_PRESENT will also be + // set. +#define SCARD_STATE_INUSE 0x00000100 // This implies that the card in the + // reader is in use by one or more + // other applications, but may be + // connected to in shared mode. If + // this bit is set, + // SCARD_STATE_PRESENT will also be + // set. +#define SCARD_STATE_MUTE 0x00000200 // This implies that the card in the + // reader is unresponsive or not + // supported by the reader or + // software. +#define SCARD_STATE_UNPOWERED 0x00000400 // This implies that the card in the + // reader has not been powered up. + +extern WINSCARDAPI LONG WINAPI +SCardLocateCardsA( + SCARDCONTEXT hContext, + LPCSTR mszCards, + LPSCARD_READERSTATEA rgReaderStates, + DWORD cReaders); +extern WINSCARDAPI LONG WINAPI +SCardLocateCardsW( + SCARDCONTEXT hContext, + LPCWSTR mszCards, + LPSCARD_READERSTATEW rgReaderStates, + DWORD cReaders); +#ifdef UNICODE +#define SCardLocateCards SCardLocateCardsW +#else +#define SCardLocateCards SCardLocateCardsA +#endif // !UNICODE + +#if (NTDDI_VERSION >= NTDDI_WINXP) +typedef struct _SCARD_ATRMASK { + DWORD cbAtr; // Number of bytes in the ATR and the mask. + BYTE rgbAtr[36]; // Atr of card (extra alignment bytes) + BYTE rgbMask[36]; // Mask for the Atr (extra alignment bytes) +} SCARD_ATRMASK, *PSCARD_ATRMASK, *LPSCARD_ATRMASK; + + +extern WINSCARDAPI LONG WINAPI +SCardLocateCardsByATRA( + SCARDCONTEXT hContext, + LPSCARD_ATRMASK rgAtrMasks, + DWORD cAtrs, + LPSCARD_READERSTATEA rgReaderStates, + DWORD cReaders); +extern WINSCARDAPI LONG WINAPI +SCardLocateCardsByATRW( + SCARDCONTEXT hContext, + LPSCARD_ATRMASK rgAtrMasks, + DWORD cAtrs, + LPSCARD_READERSTATEW rgReaderStates, + DWORD cReaders); +#ifdef UNICODE +#define SCardLocateCardsByATR SCardLocateCardsByATRW +#else +#define SCardLocateCardsByATR SCardLocateCardsByATRA +#endif // !UNICODE +#endif // (NTDDI_VERSION >= NTDDI_WINXP) + +extern WINSCARDAPI LONG WINAPI +SCardGetStatusChangeA( + SCARDCONTEXT hContext, + DWORD dwTimeout, + LPSCARD_READERSTATEA rgReaderStates, + DWORD cReaders); +extern WINSCARDAPI LONG WINAPI +SCardGetStatusChangeW( + SCARDCONTEXT hContext, + DWORD dwTimeout, + LPSCARD_READERSTATEW rgReaderStates, + DWORD cReaders); +#ifdef UNICODE +#define SCardGetStatusChange SCardGetStatusChangeW +#else +#define SCardGetStatusChange SCardGetStatusChangeA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardCancel( + SCARDCONTEXT hContext); + + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Card/Reader Communication Services +// +// The following services provide means for communication with the card. +// + +#define SCARD_SHARE_EXCLUSIVE 1 // This application is not willing to share this + // card with other applications. +#define SCARD_SHARE_SHARED 2 // This application is willing to share this + // card with other applications. +#define SCARD_SHARE_DIRECT 3 // This application demands direct control of + // the reader, so it is not available to other + // applications. + +#define SCARD_LEAVE_CARD 0 // Don't do anything special on close +#define SCARD_RESET_CARD 1 // Reset the card on close +#define SCARD_UNPOWER_CARD 2 // Power down the card on close +#define SCARD_EJECT_CARD 3 // Eject the card on close + +extern WINSCARDAPI LONG WINAPI +SCardConnectA( + SCARDCONTEXT hContext, + LPCSTR szReader, + DWORD dwShareMode, + DWORD dwPreferredProtocols, + LPSCARDHANDLE phCard, + LPDWORD pdwActiveProtocol); +extern WINSCARDAPI LONG WINAPI +SCardConnectW( + SCARDCONTEXT hContext, + LPCWSTR szReader, + DWORD dwShareMode, + DWORD dwPreferredProtocols, + LPSCARDHANDLE phCard, + LPDWORD pdwActiveProtocol); +#ifdef UNICODE +#define SCardConnect SCardConnectW +#else +#define SCardConnect SCardConnectA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardReconnect( + SCARDHANDLE hCard, + DWORD dwShareMode, + DWORD dwPreferredProtocols, + DWORD dwInitialization, + LPDWORD pdwActiveProtocol); + +extern WINSCARDAPI LONG WINAPI +SCardDisconnect( + SCARDHANDLE hCard, + DWORD dwDisposition); + +extern WINSCARDAPI LONG WINAPI +SCardBeginTransaction( + SCARDHANDLE hCard); + +extern WINSCARDAPI LONG WINAPI +SCardEndTransaction( + SCARDHANDLE hCard, + DWORD dwDisposition); + +extern WINSCARDAPI LONG WINAPI +SCardCancelTransaction( + SCARDHANDLE hCard); +// +// NOTE: This call corresponds to the PC/SC SCARDCOMM::Cancel routine, +// terminating a blocked SCardBeginTransaction service. +// + + +extern WINSCARDAPI LONG WINAPI +SCardState( + SCARDHANDLE hCard, + LPDWORD pdwState, + LPDWORD pdwProtocol, + LPBYTE pbAtr, + LPDWORD pcbAtrLen); +// +// NOTE: SCardState is an obsolete routine. PC/SC has replaced it with +// SCardStatus. +// + +extern WINSCARDAPI LONG WINAPI +SCardStatusA( + SCARDHANDLE hCard, + LPSTR mszReaderNames, + LPDWORD pcchReaderLen, + LPDWORD pdwState, + LPDWORD pdwProtocol, + LPBYTE pbAtr, + LPDWORD pcbAtrLen); +extern WINSCARDAPI LONG WINAPI +SCardStatusW( + SCARDHANDLE hCard, + LPWSTR mszReaderNames, + LPDWORD pcchReaderLen, + LPDWORD pdwState, + LPDWORD pdwProtocol, + LPBYTE pbAtr, + LPDWORD pcbAtrLen); +#ifdef UNICODE +#define SCardStatus SCardStatusW +#else +#define SCardStatus SCardStatusA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardTransmit( + SCARDHANDLE hCard, + LPCSCARD_IO_REQUEST pioSendPci, + LPCBYTE pbSendBuffer, + DWORD cbSendLength, + LPSCARD_IO_REQUEST pioRecvPci, + LPBYTE pbRecvBuffer, + LPDWORD pcbRecvLength); + +#if (NTDDI_VERSION >= NTDDI_VISTA) +extern WINSCARDAPI LONG WINAPI +SCardGetTransmitCount( + SCARDHANDLE hCard, + LPDWORD pcTransmitCount); +#endif // (NTDDI_VERSION >= NTDDI_VISTA) + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Reader Control Routines +// +// The following services provide for direct, low-level manipulation of the +// reader by the calling application allowing it control over the +// attributes of the communications with the card. +// + +extern WINSCARDAPI LONG WINAPI +SCardControl( + SCARDHANDLE hCard, + DWORD dwControlCode, + LPCVOID lpInBuffer, + DWORD cbInBufferSize, + LPVOID lpOutBuffer, + DWORD cbOutBufferSize, + LPDWORD lpBytesReturned); + +extern WINSCARDAPI LONG WINAPI +SCardGetAttrib( + SCARDHANDLE hCard, + DWORD dwAttrId, + LPBYTE pbAttr, + LPDWORD pcbAttrLen); +// +// NOTE: The routine SCardGetAttrib's name differs from the PC/SC definition. +// It should be: +// +// extern WINSCARDAPI LONG WINAPI +// SCardGetReaderCapabilities( +// SCARDHANDLE hCard, +// DWORD dwTag, +// LPBYTE pbAttr, +// out LPDWORD pcbAttrLen); +// +// Here's a work-around MACRO: +#define SCardGetReaderCapabilities SCardGetAttrib + +extern WINSCARDAPI LONG WINAPI +SCardSetAttrib( + SCARDHANDLE hCard, + DWORD dwAttrId, + LPCBYTE pbAttr, + DWORD cbAttrLen); +// +// NOTE: The routine SCardSetAttrib's name differs from the PC/SC definition. +// It should be: +// +// extern WINSCARDAPI LONG WINAPI +// SCardSetReaderCapabilities( +// SCARDHANDLE hCard, +// DWORD dwTag, +// LPCBYTE pbAttr, +// DWORD cbAttrLen); +// +// Here's a work-around MACRO: +#define SCardSetReaderCapabilities SCardSetAttrib + + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Smart Card Dialog definitions +// +// The following section contains structures and exported function +// declarations for the Smart Card Common Dialog dialog. +// + +// Defined constants +// Flags +#define SC_DLG_MINIMAL_UI 0x01 +#define SC_DLG_NO_UI 0x02 +#define SC_DLG_FORCE_UI 0x04 + +#define SCERR_NOCARDNAME 0x4000 +#define SCERR_NOGUIDS 0x8000 + +typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCA) ( SCARDCONTEXT, LPSTR, LPSTR, PVOID); +typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCW) ( SCARDCONTEXT, LPWSTR, LPWSTR, PVOID); +#ifdef UNICODE +#define LPOCNCONNPROC LPOCNCONNPROCW +#else +#define LPOCNCONNPROC LPOCNCONNPROCA +#endif // !UNICODE +typedef BOOL (WINAPI *LPOCNCHKPROC) ( SCARDCONTEXT, SCARDHANDLE, PVOID); +typedef void (WINAPI *LPOCNDSCPROC) ( SCARDCONTEXT, SCARDHANDLE, PVOID); + + +// +// OPENCARD_SEARCH_CRITERIA: In order to specify a user-extended search, +// lpfnCheck must not be NULL. Moreover, the connection to be made to the +// card before performing the callback must be indicated by either providing +// lpfnConnect and lpfnDisconnect OR by setting dwShareMode. +// If both the connection callbacks and dwShareMode are non-NULL, the callbacks +// will be used. +// + +typedef struct { + DWORD dwStructSize; + LPSTR lpstrGroupNames; // OPTIONAL reader groups to include in + DWORD nMaxGroupNames; // search. NULL defaults to + // SCard$DefaultReaders + LPCGUID rgguidInterfaces; // OPTIONAL requested interfaces + DWORD cguidInterfaces; // supported by card's SSP + LPSTR lpstrCardNames; // OPTIONAL requested card names; all cards w/ + DWORD nMaxCardNames; // matching ATRs will be accepted + LPOCNCHKPROC lpfnCheck; // OPTIONAL if NULL no user check will be performed. + LPOCNCONNPROCA lpfnConnect; // OPTIONAL if lpfnConnect is provided, + LPOCNDSCPROC lpfnDisconnect; // lpfnDisconnect must also be set. + LPVOID pvUserData; // OPTIONAL parameter to callbacks + DWORD dwShareMode; // OPTIONAL must be set if lpfnCheck is not null + DWORD dwPreferredProtocols; // OPTIONAL +} OPENCARD_SEARCH_CRITERIAA, *POPENCARD_SEARCH_CRITERIAA, *LPOPENCARD_SEARCH_CRITERIAA; +typedef struct { + DWORD dwStructSize; + LPWSTR lpstrGroupNames; // OPTIONAL reader groups to include in + DWORD nMaxGroupNames; // search. NULL defaults to + // SCard$DefaultReaders + LPCGUID rgguidInterfaces; // OPTIONAL requested interfaces + DWORD cguidInterfaces; // supported by card's SSP + LPWSTR lpstrCardNames; // OPTIONAL requested card names; all cards w/ + DWORD nMaxCardNames; // matching ATRs will be accepted + LPOCNCHKPROC lpfnCheck; // OPTIONAL if NULL no user check will be performed. + LPOCNCONNPROCW lpfnConnect; // OPTIONAL if lpfnConnect is provided, + LPOCNDSCPROC lpfnDisconnect; // lpfnDisconnect must also be set. + LPVOID pvUserData; // OPTIONAL parameter to callbacks + DWORD dwShareMode; // OPTIONAL must be set if lpfnCheck is not null + DWORD dwPreferredProtocols; // OPTIONAL +} OPENCARD_SEARCH_CRITERIAW, *POPENCARD_SEARCH_CRITERIAW, *LPOPENCARD_SEARCH_CRITERIAW; +#ifdef UNICODE +typedef OPENCARD_SEARCH_CRITERIAW OPENCARD_SEARCH_CRITERIA; +typedef POPENCARD_SEARCH_CRITERIAW POPENCARD_SEARCH_CRITERIA; +typedef LPOPENCARD_SEARCH_CRITERIAW LPOPENCARD_SEARCH_CRITERIA; +#else +typedef OPENCARD_SEARCH_CRITERIAA OPENCARD_SEARCH_CRITERIA; +typedef POPENCARD_SEARCH_CRITERIAA POPENCARD_SEARCH_CRITERIA; +typedef LPOPENCARD_SEARCH_CRITERIAA LPOPENCARD_SEARCH_CRITERIA; +#endif // UNICODE + + +// +// OPENCARDNAME_EX: used by SCardUIDlgSelectCard; replaces obsolete OPENCARDNAME +// + +typedef struct { + DWORD dwStructSize; // REQUIRED + SCARDCONTEXT hSCardContext; // REQUIRED + HWND hwndOwner; // OPTIONAL + DWORD dwFlags; // OPTIONAL -- default is SC_DLG_MINIMAL_UI + LPCSTR lpstrTitle; // OPTIONAL + LPCSTR lpstrSearchDesc; // OPTIONAL (eg. "Please insert your smart card.") + HICON hIcon; // OPTIONAL 32x32 icon for your brand insignia + POPENCARD_SEARCH_CRITERIAA pOpenCardSearchCriteria; // OPTIONAL + LPOCNCONNPROCA lpfnConnect; // OPTIONAL - performed on successful selection + LPVOID pvUserData; // OPTIONAL parameter to lpfnConnect + DWORD dwShareMode; // OPTIONAL - if lpfnConnect is NULL, dwShareMode and + DWORD dwPreferredProtocols; // OPTIONAL dwPreferredProtocols will be used to + // connect to the selected card + LPSTR lpstrRdr; // REQUIRED [IN|OUT] Name of selected reader + DWORD nMaxRdr; // REQUIRED [IN|OUT] + LPSTR lpstrCard; // REQUIRED [IN|OUT] Name of selected card + DWORD nMaxCard; // REQUIRED [IN|OUT] + DWORD dwActiveProtocol; // [OUT] set only if dwShareMode not NULL + SCARDHANDLE hCardHandle; // [OUT] set if a card connection was indicated +} OPENCARDNAME_EXA, *POPENCARDNAME_EXA, *LPOPENCARDNAME_EXA; +typedef struct { + DWORD dwStructSize; // REQUIRED + SCARDCONTEXT hSCardContext; // REQUIRED + HWND hwndOwner; // OPTIONAL + DWORD dwFlags; // OPTIONAL -- default is SC_DLG_MINIMAL_UI + LPCWSTR lpstrTitle; // OPTIONAL + LPCWSTR lpstrSearchDesc; // OPTIONAL (eg. "Please insert your smart card.") + HICON hIcon; // OPTIONAL 32x32 icon for your brand insignia + POPENCARD_SEARCH_CRITERIAW pOpenCardSearchCriteria; // OPTIONAL + LPOCNCONNPROCW lpfnConnect; // OPTIONAL - performed on successful selection + LPVOID pvUserData; // OPTIONAL parameter to lpfnConnect + DWORD dwShareMode; // OPTIONAL - if lpfnConnect is NULL, dwShareMode and + DWORD dwPreferredProtocols; // OPTIONAL dwPreferredProtocols will be used to + // connect to the selected card + LPWSTR lpstrRdr; // REQUIRED [IN|OUT] Name of selected reader + DWORD nMaxRdr; // REQUIRED [IN|OUT] + LPWSTR lpstrCard; // REQUIRED [IN|OUT] Name of selected card + DWORD nMaxCard; // REQUIRED [IN|OUT] + DWORD dwActiveProtocol; // [OUT] set only if dwShareMode not NULL + SCARDHANDLE hCardHandle; // [OUT] set if a card connection was indicated +} OPENCARDNAME_EXW, *POPENCARDNAME_EXW, *LPOPENCARDNAME_EXW; +#ifdef UNICODE +typedef OPENCARDNAME_EXW OPENCARDNAME_EX; +typedef POPENCARDNAME_EXW POPENCARDNAME_EX; +typedef LPOPENCARDNAME_EXW LPOPENCARDNAME_EX; +#else +typedef OPENCARDNAME_EXA OPENCARDNAME_EX; +typedef POPENCARDNAME_EXA POPENCARDNAME_EX; +typedef LPOPENCARDNAME_EXA LPOPENCARDNAME_EX; +#endif // UNICODE + +#define OPENCARDNAMEA_EX OPENCARDNAME_EXA +#define OPENCARDNAMEW_EX OPENCARDNAME_EXW +#define POPENCARDNAMEA_EX POPENCARDNAME_EXA +#define POPENCARDNAMEW_EX POPENCARDNAME_EXW +#define LPOPENCARDNAMEA_EX LPOPENCARDNAME_EXA +#define LPOPENCARDNAMEW_EX LPOPENCARDNAME_EXW + + +// +// SCardUIDlgSelectCard replaces GetOpenCardName +// + +extern WINSCARDAPI LONG WINAPI +SCardUIDlgSelectCardA( + LPOPENCARDNAMEA_EX); +extern WINSCARDAPI LONG WINAPI +SCardUIDlgSelectCardW( + LPOPENCARDNAMEW_EX); +#ifdef UNICODE +#define SCardUIDlgSelectCard SCardUIDlgSelectCardW +#else +#define SCardUIDlgSelectCard SCardUIDlgSelectCardA +#endif // !UNICODE + + +// +// "Smart Card Common Dialog" definitions for backwards compatibility +// with the Smart Card Base Services SDK version 1.0 +// + +typedef struct { + DWORD dwStructSize; + HWND hwndOwner; + SCARDCONTEXT hSCardContext; + LPSTR lpstrGroupNames; + DWORD nMaxGroupNames; + LPSTR lpstrCardNames; + DWORD nMaxCardNames; + LPCGUID rgguidInterfaces; + DWORD cguidInterfaces; + LPSTR lpstrRdr; + DWORD nMaxRdr; + LPSTR lpstrCard; + DWORD nMaxCard; + LPCSTR lpstrTitle; + DWORD dwFlags; + LPVOID pvUserData; + DWORD dwShareMode; + DWORD dwPreferredProtocols; + DWORD dwActiveProtocol; + LPOCNCONNPROCA lpfnConnect; + LPOCNCHKPROC lpfnCheck; + LPOCNDSCPROC lpfnDisconnect; + SCARDHANDLE hCardHandle; +} OPENCARDNAMEA, *POPENCARDNAMEA, *LPOPENCARDNAMEA; +typedef struct { + DWORD dwStructSize; + HWND hwndOwner; + SCARDCONTEXT hSCardContext; + LPWSTR lpstrGroupNames; + DWORD nMaxGroupNames; + LPWSTR lpstrCardNames; + DWORD nMaxCardNames; + LPCGUID rgguidInterfaces; + DWORD cguidInterfaces; + LPWSTR lpstrRdr; + DWORD nMaxRdr; + LPWSTR lpstrCard; + DWORD nMaxCard; + LPCWSTR lpstrTitle; + DWORD dwFlags; + LPVOID pvUserData; + DWORD dwShareMode; + DWORD dwPreferredProtocols; + DWORD dwActiveProtocol; + LPOCNCONNPROCW lpfnConnect; + LPOCNCHKPROC lpfnCheck; + LPOCNDSCPROC lpfnDisconnect; + SCARDHANDLE hCardHandle; +} OPENCARDNAMEW, *POPENCARDNAMEW, *LPOPENCARDNAMEW; +#ifdef UNICODE +typedef OPENCARDNAMEW OPENCARDNAME; +typedef POPENCARDNAMEW POPENCARDNAME; +typedef LPOPENCARDNAMEW LPOPENCARDNAME; +#else +typedef OPENCARDNAMEA OPENCARDNAME; +typedef POPENCARDNAMEA POPENCARDNAME; +typedef LPOPENCARDNAMEA LPOPENCARDNAME; +#endif // UNICODE + +// Backwards compatibility macros +#define OPENCARDNAME_A OPENCARDNAMEA +#define OPENCARDNAME_W OPENCARDNAMEW +#define POPENCARDNAME_A POPENCARDNAMEA +#define POPENCARDNAME_W POPENCARDNAMEW +#define LPOPENCARDNAME_A LPOPENCARDNAMEA +#define LPOPENCARDNAME_W LPOPENCARDNAMEW + +extern WINSCARDAPI LONG WINAPI +GetOpenCardNameA( + LPOPENCARDNAMEA); +extern WINSCARDAPI LONG WINAPI +GetOpenCardNameW( + LPOPENCARDNAMEW); +#ifdef UNICODE +#define GetOpenCardName GetOpenCardNameW +#else +#define GetOpenCardName GetOpenCardNameA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardDlgExtendedError (void); + +#if (NTDDI_VERSION >= NTDDI_VISTA) + +// +// Smartcard Caching API +// + +extern WINSCARDAPI LONG WINAPI +SCardReadCacheA( + SCARDCONTEXT hContext, + UUID *CardIdentifier, + DWORD FreshnessCounter, + LPSTR LookupName, + PBYTE Data, + DWORD *DataLen); +extern WINSCARDAPI LONG WINAPI +SCardReadCacheW( + SCARDCONTEXT hContext, + UUID *CardIdentifier, + DWORD FreshnessCounter, + LPWSTR LookupName, + PBYTE Data, + DWORD *DataLen); +#ifdef UNICODE +#define SCardReadCache SCardReadCacheW +#else +#define SCardReadCache SCardReadCacheA +#endif // !UNICODE + +extern WINSCARDAPI LONG WINAPI +SCardWriteCacheA( + SCARDCONTEXT hContext, + UUID *CardIdentifier, + DWORD FreshnessCounter, + LPSTR LookupName, + PBYTE Data, + DWORD DataLen); +extern WINSCARDAPI LONG WINAPI +SCardWriteCacheW( + SCARDCONTEXT hContext, + UUID *CardIdentifier, + DWORD FreshnessCounter, + LPWSTR LookupName, + PBYTE Data, + DWORD DataLen); +#ifdef UNICODE +#define SCardWriteCache SCardWriteCacheW +#else +#define SCardWriteCache SCardWriteCacheA +#endif // !UNICODE + +#endif // (NTDDI_VERSION >= NTDDI_VISTA) + +#ifdef __cplusplus +} +#endif +#endif // _WINSCARD_H_ + + ADDED build/cackey_win32_build/include/winsmcrd.h Index: build/cackey_win32_build/include/winsmcrd.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/winsmcrd.h @@ -0,0 +1,333 @@ +/*++ + +Copyright (c) 1996 Microsoft Corporation + +Module Name: + + winsmcrd.h + +Abstract: + Smart Card class/port IOCTL codes. This file is required for all code + user mode and kernel mode, using Smart Card IOCTL's, defines, + data structures + +Revision History: + +--*/ + + +#ifndef _NTDDSCRD_H2_ +#define _NTDDSCRD_H2_ + +#if defined (_MSC_VER) && (_MSC_VER >= 1020) +#pragma once +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef _WINSCARD_H_ +typedef DWORD ULONG; +typedef WORD UWORD; +typedef BYTE UCHAR; +#else +typedef ULONG DWORD; +// typedef UWORD WORD; +typedef UCHAR BYTE; +#endif + +#ifndef DEVICE_TYPE_SMARTCARD +#ifndef FILE_DEVICE_SMARTCARD +#define FILE_DEVICE_SMARTCARD 0x00000031 +#endif +#else +#if 0x00000031 != FILE_DEVICE_SMARTCARD +#error "Incorrect Smart Card Device Definition" +#endif +#endif + + +// +// Various constants +// + +#define SCARD_ATR_LENGTH 33 // ISO 7816-3 spec. + +// +/////////////////////////////////////////////////////////////////////////////// +// +// Protocol Flag definitions +// + +#define SCARD_PROTOCOL_UNDEFINED 0x00000000 // There is no active protocol. +#define SCARD_PROTOCOL_T0 0x00000001 // T=0 is the active protocol. +#define SCARD_PROTOCOL_T1 0x00000002 // T=1 is the active protocol. +#define SCARD_PROTOCOL_RAW 0x00010000 // Raw is the active protocol. +// +// This is the mask of ISO defined transmission protocols +// +#define SCARD_PROTOCOL_Tx (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1) +// +// Use the default transmission parameters / card clock freq. +// +#define SCARD_PROTOCOL_DEFAULT 0x80000000 +// +// Use optimal transmission parameters / card clock freq. +// Since using the optimal parameters is the default case no bit is defined to be 1 +// +#define SCARD_PROTOCOL_OPTIMAL 0x00000000 + + +// +// Ioctl parameters 1 for IOCTL_SMARTCARD_POWER +// +#define SCARD_POWER_DOWN 0 // Power down the card. +#define SCARD_COLD_RESET 1 // Cycle power and reset the card. +#define SCARD_WARM_RESET 2 // Force a reset on the card. + +// +/////////////////////////////////////////////////////////////////////////////// +// +// Reader Action IOCTLs +// + +#define SCARD_CTL_CODE(code) CTL_CODE(FILE_DEVICE_SMARTCARD, \ + (code), \ + METHOD_BUFFERED, \ + FILE_ANY_ACCESS) + +#define IOCTL_SMARTCARD_POWER SCARD_CTL_CODE( 1) +#define IOCTL_SMARTCARD_GET_ATTRIBUTE SCARD_CTL_CODE( 2) +#define IOCTL_SMARTCARD_SET_ATTRIBUTE SCARD_CTL_CODE( 3) +#define IOCTL_SMARTCARD_CONFISCATE SCARD_CTL_CODE( 4) +#define IOCTL_SMARTCARD_TRANSMIT SCARD_CTL_CODE( 5) +#define IOCTL_SMARTCARD_EJECT SCARD_CTL_CODE( 6) +#define IOCTL_SMARTCARD_SWALLOW SCARD_CTL_CODE( 7) +// #define IOCTL_SMARTCARD_READ SCARD_CTL_CODE( 8) obsolete +// #define IOCTL_SMARTCARD_WRITE SCARD_CTL_CODE( 9) obsolete +#define IOCTL_SMARTCARD_IS_PRESENT SCARD_CTL_CODE(10) +#define IOCTL_SMARTCARD_IS_ABSENT SCARD_CTL_CODE(11) +#define IOCTL_SMARTCARD_SET_PROTOCOL SCARD_CTL_CODE(12) +#define IOCTL_SMARTCARD_GET_STATE SCARD_CTL_CODE(14) +#define IOCTL_SMARTCARD_GET_LAST_ERROR SCARD_CTL_CODE(15) +#define IOCTL_SMARTCARD_GET_PERF_CNTR SCARD_CTL_CODE(16) + + +// +/////////////////////////////////////////////////////////////////////////////// +// +// Tags for requesting card and reader attributes +// + +#define MAXIMUM_ATTR_STRING_LENGTH 32 // Nothing bigger than this from getAttr +#define MAXIMUM_SMARTCARD_READERS 10 // Limit the readers on the system + +#define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag))) + +#define SCARD_CLASS_VENDOR_INFO 1 // Vendor information definitions +#define SCARD_CLASS_COMMUNICATIONS 2 // Communication definitions +#define SCARD_CLASS_PROTOCOL 3 // Protocol definitions +#define SCARD_CLASS_POWER_MGMT 4 // Power Management definitions +#define SCARD_CLASS_SECURITY 5 // Security Assurance definitions +#define SCARD_CLASS_MECHANICAL 6 // Mechanical characteristic definitions +#define SCARD_CLASS_VENDOR_DEFINED 7 // Vendor specific definitions +#define SCARD_CLASS_IFD_PROTOCOL 8 // Interface Device Protocol options +#define SCARD_CLASS_ICC_STATE 9 // ICC State specific definitions +#define SCARD_CLASS_PERF 0x7ffe // performace counters +#define SCARD_CLASS_SYSTEM 0x7fff // System-specific definitions + +#define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100) +#define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101) +#define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102) +#define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103) +#define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110) +#define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120) +// #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120) +#define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121) +#define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122) +#define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123) +#define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124) +#define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125) +// #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126) +#define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131) +#define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140) +#define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142) +#define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150) + +#define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201) +#define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202) +#define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203) +#define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204) +#define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205) +#define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206) +#define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207) +#define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208) +#define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209) +#define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a) +#define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b) +#define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c) + +#define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300) +#define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301) +#define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302) +#define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303) +#define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304) + +#define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000) +#define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003) +#define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005) +#define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007) + +#define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001) +#define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002) +#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003) +#define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004) +#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005) +#define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006) +#define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007) + +#define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001) +#define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002) +#define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003) + +#ifdef UNICODE +#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W +#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W +#else +#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A +#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A +#endif + + +// +// T=0 Protocol Defines +// + +#define SCARD_T0_HEADER_LENGTH 7 +#define SCARD_T0_CMD_LENGTH 5 + + +// +// T=1 Protocol Defines +// + +#define SCARD_T1_PROLOGUE_LENGTH 3 +#define SCARD_T1_EPILOGUE_LENGTH 2 +#define SCARD_T1_MAX_IFS 254 + + +// +/////////////////////////////////////////////////////////////////////////////// +// +// Reader states +// + +#define SCARD_UNKNOWN 0 // This value implies the driver is unaware + // of the current state of the reader. +#define SCARD_ABSENT 1 // This value implies there is no card in + // the reader. +#define SCARD_PRESENT 2 // This value implies there is a card is + // present in the reader, but that it has + // not been moved into position for use. +#define SCARD_SWALLOWED 3 // This value implies there is a card in the + // reader in position for use. The card is + // not powered. +#define SCARD_POWERED 4 // This value implies there is power is + // being provided to the card, but the + // Reader Driver is unaware of the mode of + // the card. +#define SCARD_NEGOTIABLE 5 // This value implies the card has been + // reset and is awaiting PTS negotiation. +#define SCARD_SPECIFIC 6 // This value implies the card has been + // reset and specific communication + // protocols have been established. + +//////////////////////////////////////////////////////////////////////////////// +// +// I/O Services +// +// The following services provide access to the I/O capabilities of the +// reader drivers. Services of the Smart Card are requested by placing the +// following structure into the protocol buffer: +// + + +typedef struct _SCARD_IO_REQUEST{ + DWORD dwProtocol; // Protocol identifier + DWORD cbPciLength; // Protocol Control Information Length +} SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST; +typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST; + + +// +// T=0 protocol services. +// + +typedef struct { + BYTE + bCla, // The instruction class + bIns, // The instruction code within the instruction class + bP1, + bP2, // Parameters to the instruction + bP3; // Size of I/O Transfer +} SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND; + +typedef struct { + SCARD_IO_REQUEST ioRequest; + BYTE + bSw1, + bSw2; // Return codes from the instruction + union + { + SCARD_T0_COMMAND CmdBytes; + BYTE rgbHeader[5]; + } DUMMYUNIONNAME; +} SCARD_T0_REQUEST; + +typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST; + + +// +// T=1 Protocol Services +// + +typedef struct { + SCARD_IO_REQUEST ioRequest; +} SCARD_T1_REQUEST; +typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST; + + +// +//////////////////////////////////////////////////////////////////////////////// +// +// Driver attribute flags +// + +#define SCARD_READER_SWALLOWS 0x00000001 // Reader has a card swallowing + // mechanism. +#define SCARD_READER_EJECTS 0x00000002 // Reader has a card ejection + // mechanism. +#define SCARD_READER_CONFISCATES 0x00000004 // Reader has a card capture + // mechanism. + +// +/////////////////////////////////////////////////////////////////////////////// +// +// Type of reader +// +#define SCARD_READER_TYPE_SERIAL 0x01 +#define SCARD_READER_TYPE_PARALELL 0x02 +#define SCARD_READER_TYPE_KEYBOARD 0x04 +#define SCARD_READER_TYPE_SCSI 0x08 +#define SCARD_READER_TYPE_IDE 0x10 +#define SCARD_READER_TYPE_USB 0x20 +#define SCARD_READER_TYPE_PCMCIA 0x40 +#define SCARD_READER_TYPE_VENDOR 0xF0 + +#ifdef __cplusplus +} +#endif +#endif + + ADDED build/cackey_win32_build/include/zconf.h Index: build/cackey_win32_build/include/zconf.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/zconf.h @@ -0,0 +1,332 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2005 Jean-loup Gailly. + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + */ +#ifdef Z_PREFIX +# define deflateInit_ z_deflateInit_ +# define deflate z_deflate +# define deflateEnd z_deflateEnd +# define inflateInit_ z_inflateInit_ +# define inflate z_inflate +# define inflateEnd z_inflateEnd +# define deflateInit2_ z_deflateInit2_ +# define deflateSetDictionary z_deflateSetDictionary +# define deflateCopy z_deflateCopy +# define deflateReset z_deflateReset +# define deflateParams z_deflateParams +# define deflateBound z_deflateBound +# define deflatePrime z_deflatePrime +# define inflateInit2_ z_inflateInit2_ +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateCopy z_inflateCopy +# define inflateReset z_inflateReset +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# define uncompress z_uncompress +# define adler32 z_adler32 +# define crc32 z_crc32 +# define get_crc_table z_get_crc_table +# define zError z_zError + +# define alloc_func z_alloc_func +# define free_func z_free_func +# define in_func z_in_func +# define out_func z_out_func +# define Byte z_Byte +# define uInt z_uInt +# define uLong z_uLong +# define Bytef z_Bytef +# define charf z_charf +# define intf z_intf +# define uIntf z_uIntf +# define uLongf z_uLongf +# define voidpf z_voidpf +# define voidp z_voidp +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +/* Some Mac compilers merge all .h files incorrectly: */ +#if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__) +# define NO_DUMMY_DECL +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus a few kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if 1 /* HAVE_UNISTD_H -- this line is updated by ./configure */ +# include /* for off_t */ +# include /* for SEEK_* and off_t */ +# ifdef VMS +# include /* for off_t */ +# endif +# define z_off_t off_t +#endif +#ifndef SEEK_SET +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif +#ifndef z_off_t +# define z_off_t long +#endif + +#if defined(__OS400__) +# define NO_vsnprintf +#endif + +#if defined(__MVS__) +# define NO_vsnprintf +# ifdef FAR +# undef FAR +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) +# pragma map(deflateInit_,"DEIN") +# pragma map(deflateInit2_,"DEIN2") +# pragma map(deflateEnd,"DEEND") +# pragma map(deflateBound,"DEBND") +# pragma map(inflateInit_,"ININ") +# pragma map(inflateInit2_,"ININ2") +# pragma map(inflateEnd,"INEND") +# pragma map(inflateSync,"INSY") +# pragma map(inflateSetDictionary,"INSEDI") +# pragma map(compressBound,"CMBND") +# pragma map(inflate_table,"INTABL") +# pragma map(inflate_fast,"INFA") +# pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ ADDED build/cackey_win32_build/include/zlib.h Index: build/cackey_win32_build/include/zlib.h ================================================================== --- /dev/null +++ build/cackey_win32_build/include/zlib.h @@ -0,0 +1,1357 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.2.3, July 18th, 2005 + + Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt + (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.2.3" +#define ZLIB_VERNUM 0x1230 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed + data. This version of the library supports only one compression method + (deflation) but other algorithms will be added later and will have the same + stream interface. + + Compression can be done in a single step if the buffers are large + enough (for example if an input file is mmap'ed), or can be done by + repeated calls of the compression function. In the latter case, the + application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip streams in memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never + crash even in case of corrupted input. +*/ + +typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size)); +typedef void (*free_func) OF((voidpf opaque, voidpf address)); + +struct internal_state; + +typedef struct z_stream_s { + Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total nb of input bytes read so far */ + + Bytef *next_out; /* next output byte should be put there */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total nb of bytes output so far */ + + char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text */ + uLong adler; /* adler32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has + dropped to zero. It must update next_out and avail_out when avail_out + has dropped to zero. The application must initialize zalloc, zfree and + opaque before calling the init function. All other fields are set by the + compression library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this + if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, + pointers returned by zalloc for objects of exactly 65536 bytes *must* + have their offset normalized to zero. The default allocation function + provided by this library ensures this (see zutil.c). To reduce memory + requirements and avoid any allocation of 64K objects, at the expense of + compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or + progress reports. After compression, total_in holds the total size of + the uncompressed data and may be saved for use in the decompressor + (particularly if the decompressor wants to decompress everything in + a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */ +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative + * values are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field (though see inflate()) */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion OF((void)); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is + not compatible with the zlib.h header file used by the application. + This check is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level)); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. + If zalloc and zfree are set to Z_NULL, deflateInit updates them to + use default allocation functions. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at + all (the input data is simply copied a block at a time). + Z_DEFAULT_COMPRESSION requests a default compromise between speed and + compression (currently equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if level is not a valid compression level, + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). + msg is set to null if there is no error message. deflateInit does not + perform any compression: this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush)); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce some + output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary (in interactive applications). + Some output may be provided even if flush is not set. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating avail_in or avail_out accordingly; avail_out + should never be zero before the call. The application can consume the + compressed output when it wants, for example when the output buffer is full + (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK + and with zero avail_out, it must be called again after making room in the + output buffer because there might be more output pending. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumualte before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In particular + avail_in is zero after the call if enough output space has been provided + before the call.) Flushing may degrade compression for some compression + algorithms and so it should be used only when necessary. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six to avoid repeated flush markers due to + avail_out == 0 on return. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there + was enough output space; if deflate returns with Z_OK, this function must be + called again with Z_FINISH and more output space (updated avail_out) but no + more input data, until it returns with Z_STREAM_END or an error. After + deflate has returned Z_STREAM_END, the only possible operations on the + stream are deflateReset or deflateEnd. + + Z_FINISH can be used immediately after deflateInit if all the compression + is to be done in a single step. In this case, avail_out must be at least + the value returned by deflateBound (see below). If deflate does not return + Z_STREAM_END, then it must be called again as described above. + + deflate() sets strm->adler to the adler32 checksum of all input read + so far (that is, total_in bytes). + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered + binary. This field is only for information purposes and does not affect + the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible + (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not + fatal, and deflate() can be called again with more input and more output + space to continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, + msg may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm)); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. If next_in is not Z_NULL and avail_in is large enough (the exact + value depends on the compression method), inflateInit determines the + compression method from the zlib header and allocates all data structures + accordingly; otherwise the allocation will be deferred to the first call of + inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to + use default allocation functions. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller. msg is set to null if there is no error + message. inflateInit does not perform any decompression apart from reading + the zlib header if present: this will be done by inflate(). (So next_in and + avail_in may be modified, but next_out and avail_out are unchanged.) +*/ + + +ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush)); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in is updated and processing + will resume at this point for the next call of inflate(). + + - Provide more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there + is no more input data or no more space in the output buffer (see below + about the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming + more output, and updating the next_* and avail_* values accordingly. + The application can consume the uncompressed output when it wants, for + example when the output buffer is full (avail_out == 0), or after each + call of inflate(). If inflate returns Z_OK and with zero avail_out, it + must be called again after making room in the output buffer because there + might be more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, + Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() stop + if and when it gets to the next deflate block boundary. When decoding the + zlib or gzip format, this will cause inflate() to return immediately after + the header and before the first block. When doing a raw inflate, inflate() + will go ahead and process the first block, and will return when it gets to + the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + Also to assist in this, on return inflate() will set strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 + if inflate() is currently decoding the last block in the deflate stream, + plus 128 if inflate() returned immediately after decoding an end-of-block + code or decoding the complete header up to just before the first byte of the + deflate stream. The end-of-block will not be indicated until all of the + uncompressed data from that block has been written to strm->next_out. The + number of unused bits may in general be greater than seven, except when + bit 7 of data_type is set, in which case the number of unused bits will be + less than eight. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step + (a single call of inflate), the parameter flush should be set to + Z_FINISH. In this case all pending input is processed and all pending + output is flushed; avail_out must be large enough to hold all the + uncompressed data. (The size of the uncompressed data may have been saved + by the compressor for this purpose.) The next operation on this stream must + be inflateEnd to deallocate the decompression state. The use of Z_FINISH + is never required, but can be used to inform inflate that a faster approach + may be used for the single inflate() call. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the only effect of the flush parameter in this implementation + is on the return value of inflate(), as noted below, or when it returns early + because Z_BLOCK is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the adler32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the adler32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed adler32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() will decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically. Any information + contained in the gzip header is not retained, so applications that need that + information should instead use raw inflate, see inflateInit2() below, or + inflateBack() and perform their own processing of the gzip header and + trailer. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value), Z_STREAM_ERROR if the stream structure was inconsistent (for example + if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory, + Z_BUF_ERROR if no progress is possible or if there was not enough room in the + output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may then + call inflateSync() to look for a good compression block if a partial recovery + of the data is desired. +*/ + + +ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm)); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any + pending output. + + inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state + was inconsistent. In the error case, msg may be set but then points to a + static string (which must not be deallocated). +*/ + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy)); + + This is another version of deflateInit with more compression options. The + fields next_in, zalloc, zfree and opaque must be initialized before by + the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute an adler32 check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), + no header crc, and the operating system will be set to 255 (unknown). If a + gzip stream is being written, strm->adler is a crc32 instead of an adler32. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but + is slow and reduces compression ratio; memLevel=9 uses maximum memory + for optimal speed. The default value is 8. See zconf.h for total memory + usage as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as + Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy + parameter only affects the compression ratio but not the correctness of the + compressed output even if it is not set appropriately. Z_FIXED prevents the + use of dynamic Huffman codes, allowing for a simpler decoder for special + applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid + method). msg is set to null if there is no error message. deflateInit2 does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. This function must be called + immediately after deflateInit, deflateInit2 or deflateReset, before any + call of deflate. The compressor and decompressor must use exactly the same + dictionary (see inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size in + deflate or deflate2. Thus the strings most likely to be useful should be + put at the end of the dictionary, not at the front. In addition, the + current implementation of deflate will use at most the window size minus + 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the adler32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The adler32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + adler32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if the compression method is bsort). deflateSetDictionary does not + perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and + can consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm)); +/* + This function is equivalent to deflateEnd followed by deflateInit, + but does not free and reallocate all the internal compression state. + The stream will keep the same compression level and any other attributes + that may have been set by deflateInit2. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm, + int level, + int strategy)); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2. This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different + strategy. If the compression level is changed, the input available so far + is compressed with the old level (and may be flushed); the new level will + take effect only at the next call of deflate(). + + Before the call of deflateParams, the stream state must be set as for + a call of deflate(), since the currently available input may have to + be compressed and flushed. In particular, strm->avail_out must be non-zero. + + deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source + stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR + if strm->avail_out was zero. +*/ + +ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain)); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm, + uLong sourceLen)); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() + or deflateInit2(). This would be used to allocate an output buffer + for deflation in a single pass, and so would be called before deflate(). +*/ + +ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the + bits leftover from a previous deflate stream when appending to it. As such, + this function can only be used for raw deflate, and must be used before the + first deflate() call after a deflateInit2() or deflateReset(). bits must be + less than or equal to 16, and that many of the least significant bits of + value will be inserted in the output. + + deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm, + gz_headerp head)); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to 255, with no extra, name, or comment + fields. The gzip header is returned to the default state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm, + int windowBits)); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an adler32 or a crc32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is + a crc32 instead of an adler32. + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg + is set to null if there is no error message. inflateInit2 does not perform + any decompression apart from reading the zlib header if present: this will + be done by inflate(). (So next_in and avail_in may be modified, but next_out + and avail_out are unchanged.) +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm, + const Bytef *dictionary, + uInt dictLength)); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the adler32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called + immediately after inflateInit2() or inflateReset() and before any call of + inflate() to set the dictionary. The application must insure that the + dictionary that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (such as NULL dictionary) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect adler32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm)); +/* + Skips invalid compressed data until a full flush point (see above the + description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR + if no more input was provided, Z_DATA_ERROR if no flush point has been found, + or Z_STREAM_ERROR if the stream structure was inconsistent. In the success + case, the application may save the current current value of total_in which + indicates where valid compressed data was found. In the error case, the + application may repeatedly call inflateSync, providing more input each time, + until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest, + z_streamp source)); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm)); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate all the internal decompression state. + The stream will keep attributes that may have been set by inflateInit2. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being NULL). +*/ + +ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm, + int bits, + int value)); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm, + gz_headerp head)); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK can be used to + force inflate() to return immediately after header processing is complete + and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When + any of extra, name, or comment are not Z_NULL and the respective field is + not present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits, + unsigned char FAR *window)); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the paramaters are invalid, Z_MEM_ERROR if the internal state could not + be allocated, or Z_VERSION_ERROR if the version of the library does not + match the version of the header file. +*/ + +typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *)); +typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned)); + +ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc)); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is more efficient than inflate() for + file i/o applications in that it avoids copying between the output and the + sliding window by simply making the window itself the output buffer. This + function trusts the application to not change the output buffer passed by + the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free + the allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects + only the raw deflate stream to decompress. This is different from the + normal behavior of inflate(), which expects either a zlib or gzip header and + trailer around the deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero--buf is ignored in that + case--and inflateBack() will return a buffer error. inflateBack() will call + out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. out() + should return zero on success, or non-zero on failure. If out() returns + non-zero, inflateBack() will return with an error. Neither in() nor out() + are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format + error in the deflate stream (in which case strm->msg is set to indicate the + nature of the error), or Z_STREAM_ERROR if the stream was not properly + initialized. In the case of Z_BUF_ERROR, an input or output error can be + distinguished using strm->next_in which will be Z_NULL only if in() returned + an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to + out() returning non-zero. (in() will always be called before out(), so + strm->next_in is assured to be defined if out() returns non-zero.) Note + that inflateBack() cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm)); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void)); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + + + /* utility functions */ + +/* + The following utility functions are implemented on top of the + basic stream-oriented functions. To simplify the interface, some + default options are assumed (compression level and memory usage, + standard memory allocation functions). The source code of these + utility functions can easily be modified if you need special options. +*/ + +ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be at least the value returned + by compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + This function can be used to compress a whole file at once if the + input file is mmap'ed. + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level)); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed buffer. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen)); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before + a compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen)); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total + size of the destination buffer, which must be large enough to hold the + entire uncompressed data. (The size of the uncompressed data must have + been saved previously by the compressor and transmitted to the decompressor + by some mechanism outside the scope of this compression library.) + Upon exit, destLen is the actual size of the compressed buffer. + This function can be used to decompress a whole file at once if the + input file is mmap'ed. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. +*/ + + +typedef voidp gzFile; + +ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode)); +/* + Opens a gzip (.gz) file for reading or writing. The mode parameter + is as in fopen ("rb" or "wb") but can also include a compression level + ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for + Huffman only compression as in "wb1h", or 'R' for run-length encoding + as in "wb1R". (See the description of deflateInit2 for more information + about the strategy parameter.) + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. + + gzopen returns NULL if the file could not be opened or if there was + insufficient memory to allocate the (de)compression state; errno + can be checked to distinguish the two cases (if errno is zero, the + zlib error is Z_MEM_ERROR). */ + +ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode)); +/* + gzdopen() associates a gzFile with the file descriptor fd. File + descriptors are obtained from calls like open, dup, creat, pipe or + fileno (in the file has been previously opened with fopen). + The mode parameter is as in gzopen. + The next call of gzclose on the returned gzFile will also close the + file descriptor fd, just like fclose(fdopen(fd), mode) closes the file + descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode). + gzdopen returns NULL if there was insufficient memory to allocate + the (de)compression state. +*/ + +ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy)); +/* + Dynamically update the compression level or strategy. See the description + of deflateInit2 for the meaning of these parameters. + gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not + opened for writing. +*/ + +ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len)); +/* + Reads the given number of uncompressed bytes from the compressed file. + If the input file was not in gzip format, gzread copies the given number + of bytes into the buffer. + gzread returns the number of uncompressed bytes actually read (0 for + end of file, -1 for error). */ + +ZEXTERN int ZEXPORT gzwrite OF((gzFile file, + voidpc buf, unsigned len)); +/* + Writes the given number of uncompressed bytes into the compressed file. + gzwrite returns the number of uncompressed bytes actually written + (0 in case of error). +*/ + +ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...)); +/* + Converts, formats, and writes the args to the compressed file under + control of the format string, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written (0 in case of error). The number of + uncompressed bytes written is limited to 4095. The caller should assure that + this limit is not exceeded. If it is exceeded, then gzprintf() will return + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf() + because the secure snprintf() or vsnprintf() functions were not available. +*/ + +ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s)); +/* + Writes the given null-terminated string to the compressed file, excluding + the terminating null character. + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len)); +/* + Reads bytes from the compressed file until len-1 characters are read, or + a newline character is read and transferred to buf, or an end-of-file + condition is encountered. The string is then terminated with a null + character. + gzgets returns buf, or Z_NULL in case of error. +*/ + +ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c)); +/* + Writes c, converted to an unsigned char, into the compressed file. + gzputc returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc OF((gzFile file)); +/* + Reads one byte from the compressed file. gzgetc returns this byte + or -1 in case of end of file or error. +*/ + +ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file)); +/* + Push one character back onto the stream to be read again later. + Only one character of push-back is allowed. gzungetc() returns the + character pushed, or -1 on failure. gzungetc() will fail if a + character has been pushed but not read yet, or if c is -1. The pushed + character will be discarded if the stream is repositioned with gzseek() + or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush)); +/* + Flushes all pending output into the compressed file. The parameter + flush is as in the deflate() function. The return value is the zlib + error number (see function gzerror below). gzflush returns Z_OK if + the flush parameter is Z_FINISH and all output could be flushed. + gzflush should be called only when strictly necessary because it can + degrade compression. +*/ + +ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file, + z_off_t offset, int whence)); +/* + Sets the starting position for the next gzread or gzwrite on the + given compressed file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind OF((gzFile file)); +/* + Rewinds the given file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET) +*/ + +ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file)); +/* + Returns the starting position for the next gzread or gzwrite on the + given compressed file. This position represents a number of bytes in the + uncompressed data stream. + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +ZEXTERN int ZEXPORT gzeof OF((gzFile file)); +/* + Returns 1 when EOF has previously been detected reading the given + input stream, otherwise zero. +*/ + +ZEXTERN int ZEXPORT gzdirect OF((gzFile file)); +/* + Returns 1 if file is being read directly without decompression, otherwise + zero. +*/ + +ZEXTERN int ZEXPORT gzclose OF((gzFile file)); +/* + Flushes all pending output if necessary, closes the compressed file + and deallocates all the (de)compression state. The return value is the zlib + error number (see function gzerror below). +*/ + +ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum)); +/* + Returns the error message for the last error which occurred on the + given compressed file. errnum is set to zlib error number. If an + error occurred in the file system and not in the compression library, + errnum is set to Z_ERRNO and the application may consult errno + to get the exact error code. +*/ + +ZEXTERN void ZEXPORT gzclearerr OF((gzFile file)); +/* + Clears the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the + compression library. +*/ + +ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len)); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. If buf is NULL, this function returns + the required initial value for the checksum. + An Adler-32 checksum is almost as reliable as a CRC32 but can be computed + much faster. Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2, + z_off_t len2)); +/* + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. +*/ + +ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len)); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. If buf is NULL, this function returns the required initial + value for the for the crc. Pre- and post-conditioning (one's complement) is + performed within this function so it shouldn't be done by the application. + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2)); + +/* + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size)); +ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits, + const char *version, int stream_size)); +ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size)); +#define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, sizeof(z_stream)) +#define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, sizeof(z_stream)) +#define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream)) +#define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, sizeof(z_stream)) + + +#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL) + struct internal_state {int dummy;}; /* hack for buggy compilers */ +#endif + +ZEXTERN const char * ZEXPORT zError OF((int)); +ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z)); +ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void)); + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ ADDED build/cackey_win32_build/lib/WinSCard.dll Index: build/cackey_win32_build/lib/WinSCard.dll ================================================================== --- /dev/null +++ build/cackey_win32_build/lib/WinSCard.dll cannot compute difference between binary files ADDED build/cackey_win32_build/lib/winscard.dll Index: build/cackey_win32_build/lib/winscard.dll ================================================================== --- /dev/null +++ build/cackey_win32_build/lib/winscard.dll cannot compute difference between binary files ADDED build/cackey_win32_build/lib/winscard.lib Index: build/cackey_win32_build/lib/winscard.lib ================================================================== --- /dev/null +++ build/cackey_win32_build/lib/winscard.lib cannot compute difference between binary files ADDED build/pkcs-11v2-11r1.pdf Index: build/pkcs-11v2-11r1.pdf ================================================================== --- /dev/null +++ build/pkcs-11v2-11r1.pdf cannot compute difference between binary files Index: cackey.c ================================================================== --- cackey.c +++ cackey.c @@ -164,10 +164,15 @@ #define GSCIS_AID_CCC 0xA0, 0x00, 0x00, 0x01, 0x16, 0xDB, 0x00 /* Maximum size of data portion of APDUs */ /** Do not set this above 250 **/ #define CACKEY_APDU_MTU 250 + +/* ATR If not available */ +#ifndef MAX_ATR_SIZE +#define MAX_ATR_SIZE 1024 +#endif #ifdef CACKEY_DEBUG # ifdef HAVE_TIME_H # include static time_t cackey_debug_start_time = 0; Index: pkcs11/pkcs11.h ================================================================== --- pkcs11/pkcs11.h +++ pkcs11/pkcs11.h @@ -221,10 +221,13 @@ * #ifndef NULL_PTR * #define NULL_PTR 0 * #endif */ +#ifdef _WIN32 +#pragma pack(push, cryptoki, 1) +#endif /* All the various Cryptoki types and #define'd values are in the * file pkcs11t.h. */ #include "pkcs11t.h" @@ -287,10 +290,14 @@ /* pkcs11f.h has all the information about the Cryptoki * function prototypes. */ #include "pkcs11f.h" }; + +#ifdef _WIN32 +#pragma pack(pop, cryptoki) +#endif #undef CK_PKCS11_FUNCTION_INFO #undef __PASTE