/* Terminate string, in case no valid elements are found we still return a valid string */
	*outbuf = '\0';
	outbuf_s = outbuf;

	offset = 0;
	while (1) {
		read_ret = asn1_x509_read_asn1_object(whole_thing.contents + offset, whole_thing.size - offset, &current_set, NULL);
		if (read_ret != 0) {
			break;
		}

		offset += current_set.size + 2;

		read_ret = asn1_x509_read_asn1_object(current_set.contents, current_set.size, &current_seq, NULL);

done

if [ "${SNAPSHOT}" != "1" ]; then
	mv build build_delete

	mkdir build || exit 1
	cp -rp build_delete/cackey_win32_build build/

fi

exit 0

The following files in the source directory are the intellectual property of the\
Free Software Foundation and are licensed under the terms of the GNU General\
Public License (GPL):\
	config.guess, config.sub, install-sh\
\
The files in the source directory and the "leakcheck" directory are the intellectual\
property of the United States Government.  It is not clear which, if any,\
license is made on them.  In addition, as of 07-JUN-2010 they have not be\
cleared for public release.\
\
The files in the "pkcs11/" directory are licensed under the terms of the\
following licenses:\
	mypkcs11.h : GNU General Public License 2.1.\
	pkcs11.h   : GNU General Public License 2.1.\
	pkcs11f.h  : GNU General Public License 2.1.\
	pkcs11n.h  : Mozilla Public License or GNU General Public License\

# Usage function
usage() {
	echo "Usage: build_osx.sh <target>"
	echo Where target is one of:
	echo "    leopard  - (Builds Universal 10.5 Library for PPCG4/i386)"
	echo "    snowleopard  - (Builds Universal 10.6 Library for i386/x86_64)"
	echo "    lion  - (Builds Universal 10.7 Library for i386/x86_64)"

	echo "    all - (Builds for all supported targets)"
	echo "    clean - (Cleans up)"
	echo "Run from CACKey Build Root."
	exit $?
}

# Clean up function

		LIBTOOLDIR=/Developer/usr/share/libtool/config
	fi
	if [ ! -d macbuild ]; then
		mkdir macbuild
		mkdir macbuild/Leopard
		mkdir macbuild/Snowleopard
		mkdir macbuild/Lion

		mkdir macbuild/pkg
	fi
	if [ ! -f config.guess ]; then
		cp ${LIBTOOLDIR}/config.guess .
	fi
	if [ ! -f config.sub ]; then
		cp ${LIBTOOLDIR}/config.sub .

	for HOST in i386-apple-darwin11 x86_64-apple-darwin11; do
		genbuild
	done
	libbuild
	pkgbuild
}









































# Generic build function
genbuild() {
	make distclean
	ARCH=`echo ${HOST} | cut -d "-" -f 1`
	if [ ${ARCH} == "powerpc" ]; then
		if [ ${OSX} == "Leopard" ]; then
			ARCH="ppc -mcpu=G4"
		else
			ARCH="ppc -mcpu=G3"
		fi
	fi
	if [ "${LIONBUILD}" = 1 ]; then
		if [ "${ARCH}" == "ppc -mcpu=G4" ]; then
			CC=powerpc-apple-darwin11-gcc-4.2.1 CPP=powerpc-apple-darwin11-cpp-4.2.1 CFLAGS="-m32 -I/Developer/Platforms/iPhoneOS.platform/Developer/usr/lib/gcc/powerpc-apple-darwin10/4.2.1/include -isysroot /Developer/SDKs/MacOSX10.5.sdk" CPPFLAGS="-D_LIBC_LIMITS_H_" ./configure --with-pcsc-headers=${HEADERS} --with-pcsc-libs=${LIBRARY} --host=${HOST}
		else
			CFLAGS="-arch ${ARCH}" ./configure --with-pcsc-headers=${HEADERS} --with-pcsc-libs=${LIBRARY} --host=${HOST}
		fi
	else
		CFLAGS="-arch ${ARCH}" ./configure --with-pcsc-headers=${HEADERS} --with-pcsc-libs=${LIBRARY} --host=${HOST}
	fi
	make
	cp libcackey.dylib macbuild/${OSX}/libcackey.dylib.`echo ${ARCH} | cut -d ' ' -f 1`
	cp libcackey_g.dylib macbuild/${OSX}/libcackey_g.dylib.`echo ${ARCH} | cut -d ' ' -f 1` 
}

# Library build function

		mv build/cackey_osx_build/${OSX}_pmbuild.pmdoc/${PMDOC}.1 build/cackey_osx_build/${OSX}_pmbuild.pmdoc/${PMDOC}
	done
	EXT=pkg
	if [ ${OSX} == "Snowleopard" ]; then
		cat build/cackey_osx_build/${OSX}_pmbuild.pmdoc/index.xml | sed 's|for Mac OS X Snowleopard|for Mac OS X SnowLeopard|g' > build/cackey_osx_build/${OSX}_pmbuild.pmdoc/index.xml.new
		mv build/cackey_osx_build/${OSX}_pmbuild.pmdoc/index.xml.new build/cackey_osx_build/${OSX}_pmbuild.pmdoc/index.xml
	fi




	/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker -d build/cackey_osx_build/${OSX}_pmbuild.pmdoc -o macbuild/pkg/CACKey_${CACKEY_VERSION}_${OSX}.${EXT}
	tar --create --directory macbuild/pkg/ --file macbuild/pkg/CACKey_${CACKEY_VERSION}_${OSX}.${EXT}.tar CACKey_${CACKEY_VERSION}_${OSX}.${EXT}
	gzip -9 macbuild/pkg/CACKey_${CACKEY_VERSION}_${OSX}.${EXT}.tar
	rm -rf macbuild/pkg/CACKey_${CACKEY_VERSION}_${OSX}.${EXT}
	rm -f build/cackey_osx_build/cackey.dylib
	rm -rf build/cackey_osx_build/PKCS11.tokend
	echo "${OSX} build complete"

	;;
	
	"lion")
		./autogen.sh
		lion
		exit $?
	;;







	"all")
		./autogen.sh
		leopard
		snowleopard
		lion
		echo ""
		echo "All builds complete."
		exit $?
	;;

	"clean")
		clean

#! /bin/bash

make distclean

cp "./build/cackey_win32_build/lib/winscard.dll" "./build/cackey_win32_build/lib/WinSCard.dll"

./configure --with-pcsc-headers="$(pwd)/build/cackey_win32_build/include" --with-pcsc-libs="-L$(pwd)/build/cackey_win32_build/lib -lwinscard" --host=i586-mingw32msvc  CPPFLAGS="-I$(pwd)/build/cackey_win32_build/include" || exit 1

make || exit 1

rm -f "./build/cackey_win32_build/lib/WinSCard.dll"

exit 0

/*
 scarderr.mc

   Error message codes from the Smart Card Resource Manager
   These messages must be reconciled with winerror.w
   They exist here to provide error messages on pre-Win2K systems.

*/
#ifndef SCARD_S_SUCCESS
//
// =============================
// Facility SCARD Error Messages
// =============================
//
#define SCARD_S_SUCCESS NO_ERROR
//
//  Values are 32 bit values laid out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_SYSTEM                  0x0
#define FACILITY_SCARD                   0x10


//
// Define the severity codes
//
#define STATUS_SEVERITY_WARNING          0x2
#define STATUS_SEVERITY_INFORMATIONAL    0x1
#define STATUS_SEVERITY_ERROR            0x3


//
// MessageId: SCARD_F_INTERNAL_ERROR
//
// MessageText:
//
// An internal consistency check failed.
//
#define SCARD_F_INTERNAL_ERROR           ((DWORD)0x80100001L)

//
// MessageId: SCARD_E_CANCELLED
//
// MessageText:
//
// The action was cancelled by an SCardCancel request.
//
#define SCARD_E_CANCELLED                ((DWORD)0x80100002L)

//
// MessageId: SCARD_E_INVALID_HANDLE
//
// MessageText:
//
// The supplied handle was invalid.
//
#define SCARD_E_INVALID_HANDLE           ((DWORD)0x80100003L)

//
// MessageId: SCARD_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more of the supplied parameters could not be properly interpreted.
//
#define SCARD_E_INVALID_PARAMETER        ((DWORD)0x80100004L)

//
// MessageId: SCARD_E_INVALID_TARGET
//
// MessageText:
//
// Registry startup information is missing or invalid.
//
#define SCARD_E_INVALID_TARGET           ((DWORD)0x80100005L)

//
// MessageId: SCARD_E_NO_MEMORY
//
// MessageText:
//
// Not enough memory available to complete this command.
//
#define SCARD_E_NO_MEMORY                ((DWORD)0x80100006L)

//
// MessageId: SCARD_F_WAITED_TOO_LONG
//
// MessageText:
//
// An internal consistency timer has expired.
//
#define SCARD_F_WAITED_TOO_LONG          ((DWORD)0x80100007L)

//
// MessageId: SCARD_E_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data buffer to receive returned data is too small for the returned data.
//
#define SCARD_E_INSUFFICIENT_BUFFER      ((DWORD)0x80100008L)

//
// MessageId: SCARD_E_UNKNOWN_READER
//
// MessageText:
//
// The specified reader name is not recognized.
//
#define SCARD_E_UNKNOWN_READER           ((DWORD)0x80100009L)

//
// MessageId: SCARD_E_TIMEOUT
//
// MessageText:
//
// The user-specified timeout value has expired.
//
#define SCARD_E_TIMEOUT                  ((DWORD)0x8010000AL)

//
// MessageId: SCARD_E_SHARING_VIOLATION
//
// MessageText:
//
// The smart card cannot be accessed because of other connections outstanding.
//
#define SCARD_E_SHARING_VIOLATION        ((DWORD)0x8010000BL)

//
// MessageId: SCARD_E_NO_SMARTCARD
//
// MessageText:
//
// The operation requires a Smart Card, but no Smart Card is currently in the device.
//
#define SCARD_E_NO_SMARTCARD             ((DWORD)0x8010000CL)

//
// MessageId: SCARD_E_UNKNOWN_CARD
//
// MessageText:
//
// The specified smart card name is not recognized.
//
#define SCARD_E_UNKNOWN_CARD             ((DWORD)0x8010000DL)

//
// MessageId: SCARD_E_CANT_DISPOSE
//
// MessageText:
//
// The system could not dispose of the media in the requested manner.
//
#define SCARD_E_CANT_DISPOSE             ((DWORD)0x8010000EL)

//
// MessageId: SCARD_E_PROTO_MISMATCH
//
// MessageText:
//
// The requested protocols are incompatible with the protocol currently in use with the smart card.
//
#define SCARD_E_PROTO_MISMATCH           ((DWORD)0x8010000FL)

//
// MessageId: SCARD_E_NOT_READY
//
// MessageText:
//
// The reader or smart card is not ready to accept commands.
//
#define SCARD_E_NOT_READY                ((DWORD)0x80100010L)

//
// MessageId: SCARD_E_INVALID_VALUE
//
// MessageText:
//
// One or more of the supplied parameters values could not be properly interpreted.
//
#define SCARD_E_INVALID_VALUE            ((DWORD)0x80100011L)

//
// MessageId: SCARD_E_SYSTEM_CANCELLED
//
// MessageText:
//
// The action was cancelled by the system, presumably to log off or shut down.
//
#define SCARD_E_SYSTEM_CANCELLED         ((DWORD)0x80100012L)

//
// MessageId: SCARD_F_COMM_ERROR
//
// MessageText:
//
// An internal communications error has been detected.
//
#define SCARD_F_COMM_ERROR               ((DWORD)0x80100013L)

//
// MessageId: SCARD_F_UNKNOWN_ERROR
//
// MessageText:
//
// An internal error has been detected, but the source is unknown.
//
#define SCARD_F_UNKNOWN_ERROR            ((DWORD)0x80100014L)

//
// MessageId: SCARD_E_INVALID_ATR
//
// MessageText:
//
// An ATR obtained from the registry is not a valid ATR string.
//
#define SCARD_E_INVALID_ATR              ((DWORD)0x80100015L)

//
// MessageId: SCARD_E_NOT_TRANSACTED
//
// MessageText:
//
// An attempt was made to end a non-existent transaction.
//
#define SCARD_E_NOT_TRANSACTED           ((DWORD)0x80100016L)

//
// MessageId: SCARD_E_READER_UNAVAILABLE
//
// MessageText:
//
// The specified reader is not currently available for use.
//
#define SCARD_E_READER_UNAVAILABLE       ((DWORD)0x80100017L)

//
// MessageId: SCARD_P_SHUTDOWN
//
// MessageText:
//
// The operation has been aborted to allow the server application to exit.
//
#define SCARD_P_SHUTDOWN                 ((DWORD)0x80100018L)

//
// MessageId: SCARD_E_PCI_TOO_SMALL
//
// MessageText:
//
// The PCI Receive buffer was too small.
//
#define SCARD_E_PCI_TOO_SMALL            ((DWORD)0x80100019L)

//
// MessageId: SCARD_E_READER_UNSUPPORTED
//
// MessageText:
//
// The reader driver does not meet minimal requirements for support.
//
#define SCARD_E_READER_UNSUPPORTED       ((DWORD)0x8010001AL)

//
// MessageId: SCARD_E_DUPLICATE_READER
//
// MessageText:
//
// The reader driver did not produce a unique reader name.
//
#define SCARD_E_DUPLICATE_READER         ((DWORD)0x8010001BL)

//
// MessageId: SCARD_E_CARD_UNSUPPORTED
//
// MessageText:
//
// The smart card does not meet minimal requirements for support.
//
#define SCARD_E_CARD_UNSUPPORTED         ((DWORD)0x8010001CL)

//
// MessageId: SCARD_E_NO_SERVICE
//
// MessageText:
//
// The Smart card resource manager is not running.
//
#define SCARD_E_NO_SERVICE               ((DWORD)0x8010001DL)

//
// MessageId: SCARD_E_SERVICE_STOPPED
//
// MessageText:
//
// The Smart card resource manager has shut down.
//
#define SCARD_E_SERVICE_STOPPED          ((DWORD)0x8010001EL)

//
// MessageId: SCARD_E_UNEXPECTED
//
// MessageText:
//
// An unexpected card error has occurred.
//
#define SCARD_E_UNEXPECTED               ((DWORD)0x8010001FL)

//
// MessageId: SCARD_E_ICC_INSTALLATION
//
// MessageText:
//
// No Primary Provider can be found for the smart card.
//
#define SCARD_E_ICC_INSTALLATION         ((DWORD)0x80100020L)

//
// MessageId: SCARD_E_ICC_CREATEORDER
//
// MessageText:
//
// The requested order of object creation is not supported.
//
#define SCARD_E_ICC_CREATEORDER          ((DWORD)0x80100021L)

//
// MessageId: SCARD_E_UNSUPPORTED_FEATURE
//
// MessageText:
//
// This smart card does not support the requested feature.
//
#define SCARD_E_UNSUPPORTED_FEATURE      ((DWORD)0x80100022L)

//
// MessageId: SCARD_E_DIR_NOT_FOUND
//
// MessageText:
//
// The identified directory does not exist in the smart card.
//
#define SCARD_E_DIR_NOT_FOUND            ((DWORD)0x80100023L)

//
// MessageId: SCARD_E_FILE_NOT_FOUND
//
// MessageText:
//
// The identified file does not exist in the smart card.
//
#define SCARD_E_FILE_NOT_FOUND           ((DWORD)0x80100024L)

//
// MessageId: SCARD_E_NO_DIR
//
// MessageText:
//
// The supplied path does not represent a smart card directory.
//
#define SCARD_E_NO_DIR                   ((DWORD)0x80100025L)

//
// MessageId: SCARD_E_NO_FILE
//
// MessageText:
//
// The supplied path does not represent a smart card file.
//
#define SCARD_E_NO_FILE                  ((DWORD)0x80100026L)

//
// MessageId: SCARD_E_NO_ACCESS
//
// MessageText:
//
// Access is denied to this file.
//
#define SCARD_E_NO_ACCESS                ((DWORD)0x80100027L)

//
// MessageId: SCARD_E_WRITE_TOO_MANY
//
// MessageText:
//
// The smartcard does not have enough memory to store the information.
//
#define SCARD_E_WRITE_TOO_MANY           ((DWORD)0x80100028L)

//
// MessageId: SCARD_E_BAD_SEEK
//
// MessageText:
//
// There was an error trying to set the smart card file object pointer.
//
#define SCARD_E_BAD_SEEK                 ((DWORD)0x80100029L)

//
// MessageId: SCARD_E_INVALID_CHV
//
// MessageText:
//
// The supplied PIN is incorrect.
//
#define SCARD_E_INVALID_CHV              ((DWORD)0x8010002AL)

//
// MessageId: SCARD_E_UNKNOWN_RES_MNG
//
// MessageText:
//
// An unrecognized error code was returned from a layered component.
//
#define SCARD_E_UNKNOWN_RES_MNG          ((DWORD)0x8010002BL)

//
// MessageId: SCARD_E_NO_SUCH_CERTIFICATE
//
// MessageText:
//
// The requested certificate does not exist.
//
#define SCARD_E_NO_SUCH_CERTIFICATE      ((DWORD)0x8010002CL)

//
// MessageId: SCARD_E_CERTIFICATE_UNAVAILABLE
//
// MessageText:
//
// The requested certificate could not be obtained.
//
#define SCARD_E_CERTIFICATE_UNAVAILABLE  ((DWORD)0x8010002DL)

//
// MessageId: SCARD_E_NO_READERS_AVAILABLE
//
// MessageText:
//
// Cannot find a smart card reader.
//
#define SCARD_E_NO_READERS_AVAILABLE     ((DWORD)0x8010002EL)

//
// MessageId: SCARD_E_COMM_DATA_LOST
//
// MessageText:
//
// A communications error with the smart card has been detected.  Retry the operation.
//
#define SCARD_E_COMM_DATA_LOST           ((DWORD)0x8010002FL)

//
// MessageId: SCARD_E_NO_KEY_CONTAINER
//
// MessageText:
//
// The requested key container does not exist on the smart card.
//
#define SCARD_E_NO_KEY_CONTAINER         ((DWORD)0x80100030L)

//
// MessageId: SCARD_E_SERVER_TOO_BUSY
//
// MessageText:
//
// The Smart card resource manager is too busy to complete this operation.
//
#define SCARD_E_SERVER_TOO_BUSY          ((DWORD)0x80100031L)

//
// MessageId: SCARD_E_PIN_CACHE_EXPIRED
//
// MessageText:
//
// The smart card PIN cache has expired.
//
#define SCARD_E_PIN_CACHE_EXPIRED        ((DWORD)0x80100032L)

//
// MessageId: SCARD_E_NO_PIN_CACHE
//
// MessageText:
//
// The smart card PIN cannot be cached.
//
#define SCARD_E_NO_PIN_CACHE             ((DWORD)0x80100033L)

//
// MessageId: SCARD_E_READ_ONLY_CARD
//
// MessageText:
//
// The smart card is read only and cannot be written to.
//
#define SCARD_E_READ_ONLY_CARD           ((DWORD)0x80100034L)

//
// These are warning codes.
//
//
// MessageId: SCARD_W_UNSUPPORTED_CARD
//
// MessageText:
//
// The reader cannot communicate with the smart card, due to ATR configuration conflicts.
//
#define SCARD_W_UNSUPPORTED_CARD         ((DWORD)0x80100065L)

//
// MessageId: SCARD_W_UNRESPONSIVE_CARD
//
// MessageText:
//
// The smart card is not responding to a reset.
//
#define SCARD_W_UNRESPONSIVE_CARD        ((DWORD)0x80100066L)

//
// MessageId: SCARD_W_UNPOWERED_CARD
//
// MessageText:
//
// Power has been removed from the smart card, so that further communication is not possible.
//
#define SCARD_W_UNPOWERED_CARD           ((DWORD)0x80100067L)

//
// MessageId: SCARD_W_RESET_CARD
//
// MessageText:
//
// The smart card has been reset, so any shared state information is invalid.
//
#define SCARD_W_RESET_CARD               ((DWORD)0x80100068L)

//
// MessageId: SCARD_W_REMOVED_CARD
//
// MessageText:
//
// The smart card has been removed, so that further communication is not possible.
//
#define SCARD_W_REMOVED_CARD             ((DWORD)0x80100069L)

//
// MessageId: SCARD_W_SECURITY_VIOLATION
//
// MessageText:
//
// Access was denied because of a security violation.
//
#define SCARD_W_SECURITY_VIOLATION       ((DWORD)0x8010006AL)

//
// MessageId: SCARD_W_WRONG_CHV
//
// MessageText:
//
// The card cannot be accessed because the wrong PIN was presented.
//
#define SCARD_W_WRONG_CHV                ((DWORD)0x8010006BL)

//
// MessageId: SCARD_W_CHV_BLOCKED
//
// MessageText:
//
// The card cannot be accessed because the maximum number of PIN entry attempts has been reached.
//
#define SCARD_W_CHV_BLOCKED              ((DWORD)0x8010006CL)

//
// MessageId: SCARD_W_EOF
//
// MessageText:
//
// The end of the smart card file has been reached.
//
#define SCARD_W_EOF                      ((DWORD)0x8010006DL)

//
// MessageId: SCARD_W_CANCELLED_BY_USER
//
// MessageText:
//
// The action was cancelled by the user.
//
#define SCARD_W_CANCELLED_BY_USER        ((DWORD)0x8010006EL)

//
// MessageId: SCARD_W_CARD_NOT_AUTHENTICATED
//
// MessageText:
//
// No PIN was presented to the smart card.
//
#define SCARD_W_CARD_NOT_AUTHENTICATED   ((DWORD)0x8010006FL)

//
// MessageId: SCARD_W_CACHE_ITEM_NOT_FOUND
//
// MessageText:
//
// The requested item could not be found in the cache.
//
#define SCARD_W_CACHE_ITEM_NOT_FOUND     ((DWORD)0x80100070L)

//
// MessageId: SCARD_W_CACHE_ITEM_STALE
//
// MessageText:
//
// The requested cache item is too old and was deleted from the cache.
//
#define SCARD_W_CACHE_ITEM_STALE         ((DWORD)0x80100071L)

//
// MessageId: SCARD_W_CACHE_ITEM_TOO_BIG
//
// MessageText:
//
// The new cache item exceeds the maximum per-item size defined for the cache.
//
#define SCARD_W_CACHE_ITEM_TOO_BIG       ((DWORD)0x80100072L)

#endif // SCARD_S_SUCCESS

#include <windows.h>

/*++

Copyright (c) 1996  Microsoft Corporation

Module Name:

    WinSCard

Abstract:

    This header file provides the definitions and symbols necessary for an
    Application or Smart Card Service Provider to access the Smartcard
    Subsystem.

Environment:

    Win32

Notes:

--*/

#ifndef _WINSCARD_H_
#define _WINSCARD_H_

#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif


#include <windows.h>
#include <wtypes.h>
#include <winioctl.h>
#include "winsmcrd.h"
#ifndef SCARD_S_SUCCESS
#include "SCardErr.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif


#if 1 /* jkm */
#ifndef __LPCGUID_DEFINED__
#define __LPCGUID_DEFINED__
typedef const GUID *LPCGUID;
#endif
#endif

#ifndef _LPCBYTE_DEFINED
#define _LPCBYTE_DEFINED
typedef const BYTE *LPCBYTE;
#endif
#ifndef _LPCVOID_DEFINED
#define _LPCVOID_DEFINED
typedef const VOID *LPCVOID;
#endif

#ifndef WINSCARDAPI
#define WINSCARDAPI
#endif
#ifndef WINSCARDDATA
#define WINSCARDDATA __declspec(dllimport)
#endif

/* In clr:pure we cannot mark data export with dllimport.
 * We should add small functions which returns the value of
 * the global.
 */
#if !defined(_M_CEE_PURE)
static const SCARD_IO_REQUEST static_g_rgSCardT0Pci = { SCARD_PROTOCOL_T0, 8 };
static const SCARD_IO_REQUEST static_g_rgSCardT1Pci = { SCARD_PROTOCOL_T1, 8 };

WINSCARDDATA extern const SCARD_IO_REQUEST
    g_rgSCardT0Pci,
    g_rgSCardT1Pci,
    g_rgSCardRawPci;
#define SCARD_PCI_T0  (&static_g_rgSCardT0Pci)
#define SCARD_PCI_T1  (&static_g_rgSCardT1Pci)
#define SCARD_PCI_RAW (&g_rgSCardRawPci)
#endif

//
////////////////////////////////////////////////////////////////////////////////
//
//  Service Manager Access Services
//
//      The following services are used to manage user and terminal contexts for
//      Smart Cards.
//

typedef ULONG_PTR SCARDCONTEXT;
typedef SCARDCONTEXT *PSCARDCONTEXT, *LPSCARDCONTEXT;

typedef ULONG_PTR SCARDHANDLE;
typedef SCARDHANDLE *PSCARDHANDLE, *LPSCARDHANDLE;

#define SCARD_AUTOALLOCATE (DWORD)(-1)

#define SCARD_SCOPE_USER     0  // The context is a user context, and any
                                // database operations are performed within the
                                // domain of the user.
#define SCARD_SCOPE_TERMINAL 1  // The context is that of the current terminal,
                                // and any database operations are performed
                                // within the domain of that terminal.  (The
                                // calling application must have appropriate
                                // access permissions for any database actions.)
#define SCARD_SCOPE_SYSTEM    2 // The context is the system context, and any
                                // database operations are performed within the
                                // domain of the system.  (The calling
                                // application must have appropriate access
                                // permissions for any database actions.)

extern WINSCARDAPI LONG WINAPI
SCardEstablishContext(
      DWORD dwScope,
      LPCVOID pvReserved1,
      LPCVOID pvReserved2,
     LPSCARDCONTEXT phContext);

extern WINSCARDAPI LONG WINAPI
SCardReleaseContext(
          SCARDCONTEXT hContext);

extern WINSCARDAPI LONG WINAPI
SCardIsValidContext(
          SCARDCONTEXT hContext);


//
////////////////////////////////////////////////////////////////////////////////
//
//  Smart Card Database Management Services
//
//      The following services provide for managing the Smart Card Database.
//

#define SCARD_ALL_READERS       TEXT("SCard$AllReaders\000")
#define SCARD_DEFAULT_READERS   TEXT("SCard$DefaultReaders\000")
#define SCARD_LOCAL_READERS     TEXT("SCard$LocalReaders\000")
#define SCARD_SYSTEM_READERS    TEXT("SCard$SystemReaders\000")

#define SCARD_PROVIDER_PRIMARY  1   // Primary Provider Id
#define SCARD_PROVIDER_CSP      2   // Crypto Service Provider Id
#define SCARD_PROVIDER_KSP      3   // Key Storage Provider Id


//
// Database Reader routines
//

extern WINSCARDAPI LONG WINAPI
SCardListReaderGroupsA(
        SCARDCONTEXT hContext,
        LPSTR mszGroups,
 LPDWORD pcchGroups);
extern WINSCARDAPI LONG WINAPI
SCardListReaderGroupsW(
        SCARDCONTEXT hContext,
        LPWSTR mszGroups,
 LPDWORD pcchGroups);
#ifdef UNICODE
#define SCardListReaderGroups  SCardListReaderGroupsW
#else
#define SCardListReaderGroups  SCardListReaderGroupsA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardListReadersA(
         SCARDCONTEXT hContext,
     LPCSTR mszGroups,
      LPSTR mszReaders,
  LPDWORD pcchReaders);
extern WINSCARDAPI LONG WINAPI
SCardListReadersW(
         SCARDCONTEXT hContext,
     LPCWSTR mszGroups,
      LPWSTR mszReaders,
  LPDWORD pcchReaders);
#ifdef UNICODE
#define SCardListReaders  SCardListReadersW
#else
#define SCardListReaders  SCardListReadersA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardListCardsA(
          SCARDCONTEXT hContext,
      LPCBYTE pbAtr,
      LPCGUID rgquidInterfaces,
          DWORD cguidInterfaceCount,
      LPSTR mszCards,
   LPDWORD pcchCards);
extern WINSCARDAPI LONG WINAPI
SCardListCardsW(
          SCARDCONTEXT hContext,
      LPCBYTE pbAtr,
      LPCGUID rgquidInterfaces,
          DWORD cguidInterfaceCount,
      LPWSTR mszCards,
   LPDWORD pcchCards);
#ifdef UNICODE
#define SCardListCards  SCardListCardsW
#else
#define SCardListCards  SCardListCardsA
#endif // !UNICODE
//
// NOTE:    The routine SCardListCards name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardListCardTypes(
//                        SCARDCONTEXT hContext,
//                    LPCBYTE pbAtr,
//                    LPCGUID rgquidInterfaces,
//                        DWORD cguidInterfaceCount,
//                   LPTSTR mszCards,
//                  out   LPDWORD pcchCards);
//
//          Here's a work-around MACRO:
#define SCardListCardTypes SCardListCards

extern WINSCARDAPI LONG WINAPI
SCardListInterfacesA(
         SCARDCONTEXT hContext,
         LPCSTR szCard,
        LPGUID pguidInterfaces,
  LPDWORD pcguidInterfaces);
extern WINSCARDAPI LONG WINAPI
SCardListInterfacesW(
         SCARDCONTEXT hContext,
         LPCWSTR szCard,
        LPGUID pguidInterfaces,
  LPDWORD pcguidInterfaces);
#ifdef UNICODE
#define SCardListInterfaces  SCardListInterfacesW
#else
#define SCardListInterfaces  SCardListInterfacesA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardGetProviderIdA(
         SCARDCONTEXT hContext,
         LPCSTR szCard,
        LPGUID pguidProviderId);
extern WINSCARDAPI LONG WINAPI
SCardGetProviderIdW(
         SCARDCONTEXT hContext,
         LPCWSTR szCard,
        LPGUID pguidProviderId);
#ifdef UNICODE
#define SCardGetProviderId  SCardGetProviderIdW
#else
#define SCardGetProviderId  SCardGetProviderIdA
#endif // !UNICODE
//
// NOTE:    The routine SCardGetProviderId in this implementation uses GUIDs.
//          The PC/SC definition uses BYTEs.
//

extern WINSCARDAPI LONG WINAPI
SCardGetCardTypeProviderNameA(
          SCARDCONTEXT hContext,
          LPCSTR szCardName,
          DWORD dwProviderId,
     LPSTR szProvider,
   LPDWORD pcchProvider);
extern WINSCARDAPI LONG WINAPI
SCardGetCardTypeProviderNameW(
          SCARDCONTEXT hContext,
          LPCWSTR szCardName,
          DWORD dwProviderId,
     LPWSTR szProvider,
   LPDWORD pcchProvider);
#ifdef UNICODE
#define SCardGetCardTypeProviderName  SCardGetCardTypeProviderNameW
#else
#define SCardGetCardTypeProviderName  SCardGetCardTypeProviderNameA
#endif // !UNICODE
//
// NOTE:    This routine is an extension to the PC/SC definitions.
//


//
// Database Writer routines
//

extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderGroupA(
     SCARDCONTEXT hContext,
     LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderGroupW(
     SCARDCONTEXT hContext,
     LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardIntroduceReaderGroup  SCardIntroduceReaderGroupW
#else
#define SCardIntroduceReaderGroup  SCardIntroduceReaderGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardForgetReaderGroupA(
     SCARDCONTEXT hContext,
     LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardForgetReaderGroupW(
     SCARDCONTEXT hContext,
     LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardForgetReaderGroup  SCardForgetReaderGroupW
#else
#define SCardForgetReaderGroup  SCardForgetReaderGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderA(
     SCARDCONTEXT hContext,
     LPCSTR szReaderName,
     LPCSTR szDeviceName);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderW(
     SCARDCONTEXT hContext,
     LPCWSTR szReaderName,
     LPCWSTR szDeviceName);
#ifdef UNICODE
#define SCardIntroduceReader  SCardIntroduceReaderW
#else
#define SCardIntroduceReader  SCardIntroduceReaderA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardForgetReaderA(
     SCARDCONTEXT hContext,
     LPCSTR szReaderName);
extern WINSCARDAPI LONG WINAPI
SCardForgetReaderW(
     SCARDCONTEXT hContext,
     LPCWSTR szReaderName);
#ifdef UNICODE
#define SCardForgetReader  SCardForgetReaderW
#else
#define SCardForgetReader  SCardForgetReaderA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardAddReaderToGroupA(
     SCARDCONTEXT hContext,
     LPCSTR szReaderName,
     LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardAddReaderToGroupW(
     SCARDCONTEXT hContext,
     LPCWSTR szReaderName,
     LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardAddReaderToGroup  SCardAddReaderToGroupW
#else
#define SCardAddReaderToGroup  SCardAddReaderToGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardRemoveReaderFromGroupA(
     SCARDCONTEXT hContext,
     LPCSTR szReaderName,
     LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardRemoveReaderFromGroupW(
     SCARDCONTEXT hContext,
     LPCWSTR szReaderName,
     LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardRemoveReaderFromGroup  SCardRemoveReaderFromGroupW
#else
#define SCardRemoveReaderFromGroup  SCardRemoveReaderFromGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardIntroduceCardTypeA(
         SCARDCONTEXT hContext,
         LPCSTR szCardName,
     LPCGUID pguidPrimaryProvider,
     LPCGUID rgguidInterfaces,
         DWORD dwInterfaceCount,
         LPCBYTE pbAtr,
         LPCBYTE pbAtrMask,
         DWORD cbAtrLen);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceCardTypeW(
         SCARDCONTEXT hContext,
         LPCWSTR szCardName,
     LPCGUID pguidPrimaryProvider,
     LPCGUID rgguidInterfaces,
         DWORD dwInterfaceCount,
         LPCBYTE pbAtr,
         LPCBYTE pbAtrMask,
         DWORD cbAtrLen);
#ifdef UNICODE
#define SCardIntroduceCardType  SCardIntroduceCardTypeW
#else
#define SCardIntroduceCardType  SCardIntroduceCardTypeA
#endif // !UNICODE
//
// NOTE:    The routine SCardIntroduceCardType's parameters' order differs from
//          the PC/SC definition.  It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardIntroduceCardType(
//                       SCARDCONTEXT hContext,
//                       LPCTSTR szCardName,
//                       LPCBYTE pbAtr,
//                       LPCBYTE pbAtrMask,
//                       DWORD cbAtrLen,
//                   LPCGUID pguidPrimaryProvider,
//                   LPCGUID rgguidInterfaces,
//                       DWORD dwInterfaceCount);
//
//          Here's a work-around MACRO:
#define PCSCardIntroduceCardType(hContext, szCardName, pbAtr, pbAtrMask, cbAtrLen, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount) \
          SCardIntroduceCardType(hContext, szCardName, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount, pbAtr, pbAtrMask, cbAtrLen)

extern WINSCARDAPI LONG WINAPI
SCardSetCardTypeProviderNameA(
     SCARDCONTEXT hContext,
     LPCSTR szCardName,
     DWORD dwProviderId,
     LPCSTR szProvider);
extern WINSCARDAPI LONG WINAPI
SCardSetCardTypeProviderNameW(
     SCARDCONTEXT hContext,
     LPCWSTR szCardName,
     DWORD dwProviderId,
     LPCWSTR szProvider);
#ifdef UNICODE
#define SCardSetCardTypeProviderName  SCardSetCardTypeProviderNameW
#else
#define SCardSetCardTypeProviderName  SCardSetCardTypeProviderNameA
#endif // !UNICODE
//
// NOTE:    This routine is an extention to the PC/SC specifications.
//

extern WINSCARDAPI LONG WINAPI
SCardForgetCardTypeA(
     SCARDCONTEXT hContext,
     LPCSTR szCardName);
extern WINSCARDAPI LONG WINAPI
SCardForgetCardTypeW(
     SCARDCONTEXT hContext,
     LPCWSTR szCardName);
#ifdef UNICODE
#define SCardForgetCardType  SCardForgetCardTypeW
#else
#define SCardForgetCardType  SCardForgetCardTypeA
#endif // !UNICODE


//
////////////////////////////////////////////////////////////////////////////////
//
//  Service Manager Support Routines
//
//      The following services are supplied to simplify the use of the Service
//      Manager API.
//

extern WINSCARDAPI LONG WINAPI
SCardFreeMemory(
     SCARDCONTEXT hContext,
     LPCVOID pvMem);

#if (NTDDI_VERSION >= NTDDI_WINXP)
extern WINSCARDAPI HANDLE WINAPI
SCardAccessStartedEvent(void);

extern WINSCARDAPI void WINAPI
SCardReleaseStartedEvent(void);
#endif // (NTDDI_VERSION >= NTDDI_WINXP)

//
////////////////////////////////////////////////////////////////////////////////
//
//  Reader Services
//
//      The following services supply means for tracking cards within readers.
//

typedef struct {
    LPCSTR      szReader;       // reader name
    LPVOID      pvUserData;     // user defined data
    DWORD       dwCurrentState; // current state of reader at time of call
    DWORD       dwEventState;   // state of reader after state change
    DWORD       cbAtr;          // Number of bytes in the returned ATR.
    BYTE        rgbAtr[36];     // Atr of inserted card, (extra alignment bytes)
} SCARD_READERSTATEA, *PSCARD_READERSTATEA, *LPSCARD_READERSTATEA;
typedef struct {
    LPCWSTR     szReader;       // reader name
    LPVOID      pvUserData;     // user defined data
    DWORD       dwCurrentState; // current state of reader at time of call
    DWORD       dwEventState;   // state of reader after state change
    DWORD       cbAtr;          // Number of bytes in the returned ATR.
    BYTE        rgbAtr[36];     // Atr of inserted card, (extra alignment bytes)
} SCARD_READERSTATEW, *PSCARD_READERSTATEW, *LPSCARD_READERSTATEW;
#ifdef UNICODE
typedef SCARD_READERSTATEW SCARD_READERSTATE;
typedef PSCARD_READERSTATEW PSCARD_READERSTATE;
typedef LPSCARD_READERSTATEW LPSCARD_READERSTATE;
#else
typedef SCARD_READERSTATEA SCARD_READERSTATE;
typedef PSCARD_READERSTATEA PSCARD_READERSTATE;
typedef LPSCARD_READERSTATEA LPSCARD_READERSTATE;
#endif // UNICODE

// Backwards compatibility macros
#define SCARD_READERSTATE_A SCARD_READERSTATEA
#define SCARD_READERSTATE_W SCARD_READERSTATEW
#define PSCARD_READERSTATE_A PSCARD_READERSTATEA
#define PSCARD_READERSTATE_W PSCARD_READERSTATEW
#define LPSCARD_READERSTATE_A LPSCARD_READERSTATEA
#define LPSCARD_READERSTATE_W LPSCARD_READERSTATEW

#define SCARD_STATE_UNAWARE     0x00000000  // The application is unaware of the
                                            // current state, and would like to
                                            // know.  The use of this value
                                            // results in an immediate return
                                            // from state transition monitoring
                                            // services.  This is represented by
                                            // all bits set to zero.
#define SCARD_STATE_IGNORE      0x00000001  // The application requested that
                                            // this reader be ignored.  No other
                                            // bits will be set.
#define SCARD_STATE_CHANGED     0x00000002  // This implies that there is a
                                            // difference between the state
                                            // believed by the application, and
                                            // the state known by the Service
                                            // Manager.  When this bit is set,
                                            // the application may assume a
                                            // significant state change has
                                            // occurred on this reader.
#define SCARD_STATE_UNKNOWN     0x00000004  // This implies that the given
                                            // reader name is not recognized by
                                            // the Service Manager.  If this bit
                                            // is set, then SCARD_STATE_CHANGED
                                            // and SCARD_STATE_IGNORE will also
                                            // be set.
#define SCARD_STATE_UNAVAILABLE 0x00000008  // This implies that the actual
                                            // state of this reader is not
                                            // available.  If this bit is set,
                                            // then all the following bits are
                                            // clear.
#define SCARD_STATE_EMPTY       0x00000010  // This implies that there is not
                                            // card in the reader.  If this bit
                                            // is set, all the following bits
                                            // will be clear.
#define SCARD_STATE_PRESENT     0x00000020  // This implies that there is a card
                                            // in the reader.
#define SCARD_STATE_ATRMATCH    0x00000040  // This implies that there is a card
                                            // in the reader with an ATR
                                            // matching one of the target cards.
                                            // If this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.  This bit is only returned
                                            // on the SCardLocateCard() service.
#define SCARD_STATE_EXCLUSIVE   0x00000080  // This implies that the card in the
                                            // reader is allocated for exclusive
                                            // use by another application.  If
                                            // this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.
#define SCARD_STATE_INUSE       0x00000100  // This implies that the card in the
                                            // reader is in use by one or more
                                            // other applications, but may be
                                            // connected to in shared mode.  If
                                            // this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.
#define SCARD_STATE_MUTE        0x00000200  // This implies that the card in the
                                            // reader is unresponsive or not
                                            // supported by the reader or
                                            // software.
#define SCARD_STATE_UNPOWERED   0x00000400  // This implies that the card in the
                                            // reader has not been powered up.

extern WINSCARDAPI LONG WINAPI
SCardLocateCardsA(
        SCARDCONTEXT hContext,
        LPCSTR mszCards,
 LPSCARD_READERSTATEA rgReaderStates,
        DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardLocateCardsW(
        SCARDCONTEXT hContext,
        LPCWSTR mszCards,
 LPSCARD_READERSTATEW rgReaderStates,
        DWORD cReaders);
#ifdef UNICODE
#define SCardLocateCards  SCardLocateCardsW
#else
#define SCardLocateCards  SCardLocateCardsA
#endif // !UNICODE

#if (NTDDI_VERSION >= NTDDI_WINXP)
typedef struct _SCARD_ATRMASK {
    DWORD       cbAtr;          // Number of bytes in the ATR and the mask.
    BYTE        rgbAtr[36];     // Atr of card (extra alignment bytes)
    BYTE        rgbMask[36];    // Mask for the Atr (extra alignment bytes)
} SCARD_ATRMASK, *PSCARD_ATRMASK, *LPSCARD_ATRMASK;


extern WINSCARDAPI LONG WINAPI
SCardLocateCardsByATRA(
        SCARDCONTEXT hContext,
        LPSCARD_ATRMASK rgAtrMasks,
        DWORD cAtrs,
 LPSCARD_READERSTATEA rgReaderStates,
        DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardLocateCardsByATRW(
        SCARDCONTEXT hContext,
        LPSCARD_ATRMASK rgAtrMasks,
        DWORD cAtrs,
 LPSCARD_READERSTATEW rgReaderStates,
        DWORD cReaders);
#ifdef UNICODE
#define SCardLocateCardsByATR  SCardLocateCardsByATRW
#else
#define SCardLocateCardsByATR  SCardLocateCardsByATRA
#endif // !UNICODE
#endif // (NTDDI_VERSION >= NTDDI_WINXP)

extern WINSCARDAPI LONG WINAPI
SCardGetStatusChangeA(
        SCARDCONTEXT hContext,
        DWORD dwTimeout,
 LPSCARD_READERSTATEA rgReaderStates,
        DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardGetStatusChangeW(
        SCARDCONTEXT hContext,
        DWORD dwTimeout,
 LPSCARD_READERSTATEW rgReaderStates,
        DWORD cReaders);
#ifdef UNICODE
#define SCardGetStatusChange  SCardGetStatusChangeW
#else
#define SCardGetStatusChange  SCardGetStatusChangeA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardCancel(
        SCARDCONTEXT hContext);


//
////////////////////////////////////////////////////////////////////////////////
//
//  Card/Reader Communication Services
//
//      The following services provide means for communication with the card.
//

#define SCARD_SHARE_EXCLUSIVE 1 // This application is not willing to share this
                                // card with other applications.
#define SCARD_SHARE_SHARED    2 // This application is willing to share this
                                // card with other applications.
#define SCARD_SHARE_DIRECT    3 // This application demands direct control of
                                // the reader, so it is not available to other
                                // applications.

#define SCARD_LEAVE_CARD      0 // Don't do anything special on close
#define SCARD_RESET_CARD      1 // Reset the card on close
#define SCARD_UNPOWER_CARD    2 // Power down the card on close
#define SCARD_EJECT_CARD      3 // Eject the card on close

extern WINSCARDAPI LONG WINAPI
SCardConnectA(
        SCARDCONTEXT hContext,
        LPCSTR szReader,
        DWORD dwShareMode,
        DWORD dwPreferredProtocols,
       LPSCARDHANDLE phCard,
       LPDWORD pdwActiveProtocol);
extern WINSCARDAPI LONG WINAPI
SCardConnectW(
        SCARDCONTEXT hContext,
        LPCWSTR szReader,
        DWORD dwShareMode,
        DWORD dwPreferredProtocols,
       LPSCARDHANDLE phCard,
       LPDWORD pdwActiveProtocol);
#ifdef UNICODE
#define SCardConnect  SCardConnectW
#else
#define SCardConnect  SCardConnectA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardReconnect(
          SCARDHANDLE hCard,
          DWORD dwShareMode,
          DWORD dwPreferredProtocols,
          DWORD dwInitialization,
     LPDWORD pdwActiveProtocol);

extern WINSCARDAPI LONG WINAPI
SCardDisconnect(
        SCARDHANDLE hCard,
        DWORD dwDisposition);

extern WINSCARDAPI LONG WINAPI
SCardBeginTransaction(
        SCARDHANDLE hCard);

extern WINSCARDAPI LONG WINAPI
SCardEndTransaction(
        SCARDHANDLE hCard,
        DWORD dwDisposition);

extern WINSCARDAPI LONG WINAPI
SCardCancelTransaction(
        SCARDHANDLE hCard);
//
// NOTE:    This call corresponds to the PC/SC SCARDCOMM::Cancel routine,
//          terminating a blocked SCardBeginTransaction service.
//


extern WINSCARDAPI LONG WINAPI
SCardState(
        SCARDHANDLE hCard,
       LPDWORD pdwState,
       LPDWORD pdwProtocol,
       LPBYTE pbAtr,
 LPDWORD pcbAtrLen);
//
// NOTE:    SCardState is an obsolete routine.  PC/SC has replaced it with
//          SCardStatus.
//

extern WINSCARDAPI LONG WINAPI
SCardStatusA(
            SCARDHANDLE hCard,
      LPSTR mszReaderNames,
 LPDWORD pcchReaderLen,
       LPDWORD pdwState,
       LPDWORD pdwProtocol,
     LPBYTE pbAtr,
 LPDWORD pcbAtrLen);
extern WINSCARDAPI LONG WINAPI
SCardStatusW(
            SCARDHANDLE hCard,
      LPWSTR mszReaderNames,
 LPDWORD pcchReaderLen,
       LPDWORD pdwState,
       LPDWORD pdwProtocol,
     LPBYTE pbAtr,
 LPDWORD pcbAtrLen);
#ifdef UNICODE
#define SCardStatus  SCardStatusW
#else
#define SCardStatus  SCardStatusA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardTransmit(
            SCARDHANDLE hCard,
            LPCSCARD_IO_REQUEST pioSendPci,
     LPCBYTE pbSendBuffer,
            DWORD cbSendLength,
 LPSCARD_IO_REQUEST pioRecvPci,
     LPBYTE pbRecvBuffer,
     LPDWORD pcbRecvLength);

#if (NTDDI_VERSION >= NTDDI_VISTA)
extern WINSCARDAPI LONG WINAPI
SCardGetTransmitCount(
     SCARDHANDLE hCard,
     LPDWORD pcTransmitCount);
#endif // (NTDDI_VERSION >= NTDDI_VISTA)

//
////////////////////////////////////////////////////////////////////////////////
//
//  Reader Control Routines
//
//      The following services provide for direct, low-level manipulation of the
//      reader by the calling application allowing it control over the
//      attributes of the communications with the card.
//

extern WINSCARDAPI LONG WINAPI
SCardControl(
        SCARDHANDLE hCard,
        DWORD dwControlCode,
     LPCVOID lpInBuffer,
        DWORD cbInBufferSize,
     LPVOID lpOutBuffer,
        DWORD cbOutBufferSize,
       LPDWORD lpBytesReturned);

extern WINSCARDAPI LONG WINAPI
SCardGetAttrib(
        SCARDHANDLE hCard,
        DWORD dwAttrId,
     LPBYTE pbAttr,
 LPDWORD pcbAttrLen);
//
// NOTE:    The routine SCardGetAttrib's name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardGetReaderCapabilities(
//                      SCARDHANDLE hCard,
//                      DWORD dwTag,
//                     LPBYTE pbAttr,
//                  out LPDWORD pcbAttrLen);
//
//          Here's a work-around MACRO:
#define SCardGetReaderCapabilities SCardGetAttrib

extern WINSCARDAPI LONG WINAPI
SCardSetAttrib(
     SCARDHANDLE hCard,
     DWORD dwAttrId,
     LPCBYTE pbAttr,
     DWORD cbAttrLen);
//
// NOTE:    The routine SCardSetAttrib's name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardSetReaderCapabilities(
//                      SCARDHANDLE hCard,
//                      DWORD dwTag,
//                      LPCBYTE pbAttr,
//                      DWORD cbAttrLen);
//
//          Here's a work-around MACRO:
#define SCardSetReaderCapabilities SCardSetAttrib


//
////////////////////////////////////////////////////////////////////////////////
//
//  Smart Card Dialog definitions
//
//      The following section contains structures and  exported function
//      declarations for the Smart Card Common Dialog dialog.
//

// Defined constants
// Flags
#define SC_DLG_MINIMAL_UI       0x01
#define SC_DLG_NO_UI            0x02
#define SC_DLG_FORCE_UI         0x04

#define SCERR_NOCARDNAME        0x4000
#define SCERR_NOGUIDS           0x8000

typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCA) ( SCARDCONTEXT,  LPSTR,  LPSTR,  PVOID);
typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCW) ( SCARDCONTEXT,  LPWSTR,  LPWSTR,  PVOID);
#ifdef UNICODE
#define LPOCNCONNPROC  LPOCNCONNPROCW
#else
#define LPOCNCONNPROC  LPOCNCONNPROCA
#endif // !UNICODE
typedef BOOL (WINAPI *LPOCNCHKPROC) ( SCARDCONTEXT,  SCARDHANDLE,  PVOID);
typedef void (WINAPI *LPOCNDSCPROC) ( SCARDCONTEXT,  SCARDHANDLE,  PVOID);


//
// OPENCARD_SEARCH_CRITERIA: In order to specify a user-extended search,
// lpfnCheck must not be NULL.  Moreover, the connection to be made to the
// card before performing the callback must be indicated by either providing
// lpfnConnect and lpfnDisconnect OR by setting dwShareMode.
// If both the connection callbacks and dwShareMode are non-NULL, the callbacks
// will be used.
//

typedef struct {
    DWORD           dwStructSize;
    LPSTR           lpstrGroupNames;        // OPTIONAL reader groups to include in
    DWORD           nMaxGroupNames;         //          search.  NULL defaults to
                                            //          SCard$DefaultReaders
    LPCGUID         rgguidInterfaces;       // OPTIONAL requested interfaces
    DWORD           cguidInterfaces;        //          supported by card's SSP
    LPSTR           lpstrCardNames;         // OPTIONAL requested card names; all cards w/
    DWORD           nMaxCardNames;          //          matching ATRs will be accepted
    LPOCNCHKPROC    lpfnCheck;              // OPTIONAL if NULL no user check will be performed.
    LPOCNCONNPROCA  lpfnConnect;            // OPTIONAL if lpfnConnect is provided,
    LPOCNDSCPROC    lpfnDisconnect;         //          lpfnDisconnect must also be set.
    LPVOID          pvUserData;             // OPTIONAL parameter to callbacks
    DWORD           dwShareMode;            // OPTIONAL must be set if lpfnCheck is not null
    DWORD           dwPreferredProtocols;   // OPTIONAL
} OPENCARD_SEARCH_CRITERIAA, *POPENCARD_SEARCH_CRITERIAA, *LPOPENCARD_SEARCH_CRITERIAA;
typedef struct {
    DWORD           dwStructSize;
    LPWSTR          lpstrGroupNames;        // OPTIONAL reader groups to include in
    DWORD           nMaxGroupNames;         //          search.  NULL defaults to
                                            //          SCard$DefaultReaders
    LPCGUID         rgguidInterfaces;       // OPTIONAL requested interfaces
    DWORD           cguidInterfaces;        //          supported by card's SSP
    LPWSTR          lpstrCardNames;         // OPTIONAL requested card names; all cards w/
    DWORD           nMaxCardNames;          //          matching ATRs will be accepted
    LPOCNCHKPROC    lpfnCheck;              // OPTIONAL if NULL no user check will be performed.
    LPOCNCONNPROCW  lpfnConnect;            // OPTIONAL if lpfnConnect is provided,
    LPOCNDSCPROC    lpfnDisconnect;         //          lpfnDisconnect must also be set.
    LPVOID          pvUserData;             // OPTIONAL parameter to callbacks
    DWORD           dwShareMode;            // OPTIONAL must be set if lpfnCheck is not null
    DWORD           dwPreferredProtocols;   // OPTIONAL
} OPENCARD_SEARCH_CRITERIAW, *POPENCARD_SEARCH_CRITERIAW, *LPOPENCARD_SEARCH_CRITERIAW;
#ifdef UNICODE
typedef OPENCARD_SEARCH_CRITERIAW OPENCARD_SEARCH_CRITERIA;
typedef POPENCARD_SEARCH_CRITERIAW POPENCARD_SEARCH_CRITERIA;
typedef LPOPENCARD_SEARCH_CRITERIAW LPOPENCARD_SEARCH_CRITERIA;
#else
typedef OPENCARD_SEARCH_CRITERIAA OPENCARD_SEARCH_CRITERIA;
typedef POPENCARD_SEARCH_CRITERIAA POPENCARD_SEARCH_CRITERIA;
typedef LPOPENCARD_SEARCH_CRITERIAA LPOPENCARD_SEARCH_CRITERIA;
#endif // UNICODE


//
// OPENCARDNAME_EX: used by SCardUIDlgSelectCard; replaces obsolete OPENCARDNAME
//

typedef struct {
    DWORD           dwStructSize;           // REQUIRED
    SCARDCONTEXT    hSCardContext;          // REQUIRED
    HWND            hwndOwner;              // OPTIONAL
    DWORD           dwFlags;                // OPTIONAL -- default is SC_DLG_MINIMAL_UI
    LPCSTR          lpstrTitle;             // OPTIONAL
    LPCSTR          lpstrSearchDesc;        // OPTIONAL (eg. "Please insert your <brandname> smart card.")
    HICON           hIcon;                  // OPTIONAL 32x32 icon for your brand insignia
    POPENCARD_SEARCH_CRITERIAA pOpenCardSearchCriteria; // OPTIONAL
    LPOCNCONNPROCA  lpfnConnect;            // OPTIONAL - performed on successful selection
    LPVOID          pvUserData;             // OPTIONAL parameter to lpfnConnect
    DWORD           dwShareMode;            // OPTIONAL - if lpfnConnect is NULL, dwShareMode and
    DWORD           dwPreferredProtocols;   // OPTIONAL dwPreferredProtocols will be used to
                                            //          connect to the selected card
    LPSTR           lpstrRdr;               // REQUIRED [IN|OUT] Name of selected reader
    DWORD           nMaxRdr;                // REQUIRED [IN|OUT]
    LPSTR           lpstrCard;              // REQUIRED [IN|OUT] Name of selected card
    DWORD           nMaxCard;               // REQUIRED [IN|OUT]
    DWORD           dwActiveProtocol;       // [OUT] set only if dwShareMode not NULL
    SCARDHANDLE     hCardHandle;            // [OUT] set if a card connection was indicated
} OPENCARDNAME_EXA, *POPENCARDNAME_EXA, *LPOPENCARDNAME_EXA;
typedef struct {
    DWORD           dwStructSize;           // REQUIRED
    SCARDCONTEXT    hSCardContext;          // REQUIRED
    HWND            hwndOwner;              // OPTIONAL
    DWORD           dwFlags;                // OPTIONAL -- default is SC_DLG_MINIMAL_UI
    LPCWSTR         lpstrTitle;             // OPTIONAL
    LPCWSTR         lpstrSearchDesc;        // OPTIONAL (eg. "Please insert your <brandname> smart card.")
    HICON           hIcon;                  // OPTIONAL 32x32 icon for your brand insignia
    POPENCARD_SEARCH_CRITERIAW pOpenCardSearchCriteria; // OPTIONAL
    LPOCNCONNPROCW  lpfnConnect;            // OPTIONAL - performed on successful selection
    LPVOID          pvUserData;             // OPTIONAL parameter to lpfnConnect
    DWORD           dwShareMode;            // OPTIONAL - if lpfnConnect is NULL, dwShareMode and
    DWORD           dwPreferredProtocols;   // OPTIONAL dwPreferredProtocols will be used to
                                            //          connect to the selected card
    LPWSTR          lpstrRdr;               // REQUIRED [IN|OUT] Name of selected reader
    DWORD           nMaxRdr;                // REQUIRED [IN|OUT]
    LPWSTR          lpstrCard;              // REQUIRED [IN|OUT] Name of selected card
    DWORD           nMaxCard;               // REQUIRED [IN|OUT]
    DWORD           dwActiveProtocol;       // [OUT] set only if dwShareMode not NULL
    SCARDHANDLE     hCardHandle;            // [OUT] set if a card connection was indicated
} OPENCARDNAME_EXW, *POPENCARDNAME_EXW, *LPOPENCARDNAME_EXW;
#ifdef UNICODE
typedef OPENCARDNAME_EXW OPENCARDNAME_EX;
typedef POPENCARDNAME_EXW POPENCARDNAME_EX;
typedef LPOPENCARDNAME_EXW LPOPENCARDNAME_EX;
#else
typedef OPENCARDNAME_EXA OPENCARDNAME_EX;
typedef POPENCARDNAME_EXA POPENCARDNAME_EX;
typedef LPOPENCARDNAME_EXA LPOPENCARDNAME_EX;
#endif // UNICODE

#define OPENCARDNAMEA_EX OPENCARDNAME_EXA
#define OPENCARDNAMEW_EX OPENCARDNAME_EXW
#define POPENCARDNAMEA_EX POPENCARDNAME_EXA
#define POPENCARDNAMEW_EX POPENCARDNAME_EXW
#define LPOPENCARDNAMEA_EX LPOPENCARDNAME_EXA
#define LPOPENCARDNAMEW_EX LPOPENCARDNAME_EXW


//
// SCardUIDlgSelectCard replaces GetOpenCardName
//

extern WINSCARDAPI LONG WINAPI
SCardUIDlgSelectCardA(
    LPOPENCARDNAMEA_EX);
extern WINSCARDAPI LONG WINAPI
SCardUIDlgSelectCardW(
    LPOPENCARDNAMEW_EX);
#ifdef UNICODE
#define SCardUIDlgSelectCard  SCardUIDlgSelectCardW
#else
#define SCardUIDlgSelectCard  SCardUIDlgSelectCardA
#endif // !UNICODE


//
// "Smart Card Common Dialog" definitions for backwards compatibility
//  with the Smart Card Base Services SDK version 1.0
//

typedef struct {
    DWORD           dwStructSize;
    HWND            hwndOwner;
    SCARDCONTEXT    hSCardContext;
    LPSTR           lpstrGroupNames;
    DWORD           nMaxGroupNames;
    LPSTR           lpstrCardNames;
    DWORD           nMaxCardNames;
    LPCGUID         rgguidInterfaces;
    DWORD           cguidInterfaces;
    LPSTR           lpstrRdr;
    DWORD           nMaxRdr;
    LPSTR           lpstrCard;
    DWORD           nMaxCard;
    LPCSTR          lpstrTitle;
    DWORD           dwFlags;
    LPVOID          pvUserData;
    DWORD           dwShareMode;
    DWORD           dwPreferredProtocols;
    DWORD           dwActiveProtocol;
    LPOCNCONNPROCA  lpfnConnect;
    LPOCNCHKPROC    lpfnCheck;
    LPOCNDSCPROC    lpfnDisconnect;
    SCARDHANDLE     hCardHandle;
} OPENCARDNAMEA, *POPENCARDNAMEA, *LPOPENCARDNAMEA;
typedef struct {
    DWORD           dwStructSize;
    HWND            hwndOwner;
    SCARDCONTEXT    hSCardContext;
    LPWSTR          lpstrGroupNames;
    DWORD           nMaxGroupNames;
    LPWSTR          lpstrCardNames;
    DWORD           nMaxCardNames;
    LPCGUID         rgguidInterfaces;
    DWORD           cguidInterfaces;
    LPWSTR          lpstrRdr;
    DWORD           nMaxRdr;
    LPWSTR          lpstrCard;
    DWORD           nMaxCard;
    LPCWSTR         lpstrTitle;
    DWORD           dwFlags;
    LPVOID          pvUserData;
    DWORD           dwShareMode;
    DWORD           dwPreferredProtocols;
    DWORD           dwActiveProtocol;
    LPOCNCONNPROCW  lpfnConnect;
    LPOCNCHKPROC    lpfnCheck;
    LPOCNDSCPROC    lpfnDisconnect;
    SCARDHANDLE     hCardHandle;
} OPENCARDNAMEW, *POPENCARDNAMEW, *LPOPENCARDNAMEW;
#ifdef UNICODE
typedef OPENCARDNAMEW OPENCARDNAME;
typedef POPENCARDNAMEW POPENCARDNAME;
typedef LPOPENCARDNAMEW LPOPENCARDNAME;
#else
typedef OPENCARDNAMEA OPENCARDNAME;
typedef POPENCARDNAMEA POPENCARDNAME;
typedef LPOPENCARDNAMEA LPOPENCARDNAME;
#endif // UNICODE

// Backwards compatibility macros
#define OPENCARDNAME_A OPENCARDNAMEA
#define OPENCARDNAME_W OPENCARDNAMEW
#define POPENCARDNAME_A POPENCARDNAMEA
#define POPENCARDNAME_W POPENCARDNAMEW
#define LPOPENCARDNAME_A LPOPENCARDNAMEA
#define LPOPENCARDNAME_W LPOPENCARDNAMEW

extern WINSCARDAPI LONG WINAPI
GetOpenCardNameA(
    LPOPENCARDNAMEA);
extern WINSCARDAPI LONG WINAPI
GetOpenCardNameW(
    LPOPENCARDNAMEW);
#ifdef UNICODE
#define GetOpenCardName  GetOpenCardNameW
#else
#define GetOpenCardName  GetOpenCardNameA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardDlgExtendedError (void);

#if (NTDDI_VERSION >= NTDDI_VISTA)

//
// Smartcard Caching API
//

extern WINSCARDAPI LONG WINAPI
SCardReadCacheA(
      SCARDCONTEXT hContext,
      UUID *CardIdentifier,
      DWORD FreshnessCounter,
      LPSTR LookupName,
     PBYTE Data,
     DWORD *DataLen);
extern WINSCARDAPI LONG WINAPI
SCardReadCacheW(
      SCARDCONTEXT hContext,
      UUID *CardIdentifier,
      DWORD FreshnessCounter,
      LPWSTR LookupName,
     PBYTE Data,
     DWORD *DataLen);
#ifdef UNICODE
#define SCardReadCache  SCardReadCacheW
#else
#define SCardReadCache  SCardReadCacheA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardWriteCacheA(
     SCARDCONTEXT hContext,
     UUID *CardIdentifier,
     DWORD FreshnessCounter,
     LPSTR LookupName,
     PBYTE Data,
     DWORD DataLen);
extern WINSCARDAPI LONG WINAPI
SCardWriteCacheW(
     SCARDCONTEXT hContext,
     UUID *CardIdentifier,
     DWORD FreshnessCounter,
     LPWSTR LookupName,
     PBYTE Data,
     DWORD DataLen);
#ifdef UNICODE
#define SCardWriteCache  SCardWriteCacheW
#else
#define SCardWriteCache  SCardWriteCacheA
#endif // !UNICODE

#endif // (NTDDI_VERSION >= NTDDI_VISTA)

#ifdef __cplusplus
}
#endif
#endif // _WINSCARD_H_

/*++

Copyright (c) 1996  Microsoft Corporation

Module Name:

    winsmcrd.h

Abstract:
    Smart Card class/port IOCTL codes. This file is required for all code
    user mode and kernel mode, using Smart Card IOCTL's, defines,
    data structures

Revision History:

--*/


#ifndef _NTDDSCRD_H2_
#define _NTDDSCRD_H2_

#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif

#ifdef __cplusplus
extern "C" {
#endif

#ifdef _WINSCARD_H_
typedef DWORD ULONG;
typedef WORD UWORD;
typedef BYTE UCHAR;
#else
typedef ULONG DWORD;
// typedef UWORD WORD;
typedef UCHAR BYTE;
#endif

#ifndef DEVICE_TYPE_SMARTCARD
#ifndef FILE_DEVICE_SMARTCARD
#define FILE_DEVICE_SMARTCARD           0x00000031
#endif
#else
#if 0x00000031 != FILE_DEVICE_SMARTCARD
#error "Incorrect Smart Card Device Definition"
#endif
#endif


//
// Various constants
//

#define SCARD_ATR_LENGTH 33  // ISO 7816-3 spec.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Protocol Flag definitions
//

#define SCARD_PROTOCOL_UNDEFINED    0x00000000  // There is no active protocol.
#define SCARD_PROTOCOL_T0           0x00000001  // T=0 is the active protocol.
#define SCARD_PROTOCOL_T1           0x00000002  // T=1 is the active protocol.
#define SCARD_PROTOCOL_RAW          0x00010000  // Raw is the active protocol.
//
// This is the mask of ISO defined transmission protocols
//
#define SCARD_PROTOCOL_Tx           (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1)
//
// Use the default transmission parameters / card clock freq.
//
#define SCARD_PROTOCOL_DEFAULT      0x80000000
//
// Use optimal transmission parameters / card clock freq.
// Since using the optimal parameters is the default case no bit is defined to be 1
//
#define SCARD_PROTOCOL_OPTIMAL      0x00000000


//
// Ioctl parameters 1 for IOCTL_SMARTCARD_POWER
//
#define SCARD_POWER_DOWN 0          // Power down the card.
#define SCARD_COLD_RESET 1          // Cycle power and reset the card.
#define SCARD_WARM_RESET 2          // Force a reset on the card.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader Action IOCTLs
//

#define SCARD_CTL_CODE(code)        CTL_CODE(FILE_DEVICE_SMARTCARD, \
                                            (code), \
                                            METHOD_BUFFERED, \
                                            FILE_ANY_ACCESS)

#define IOCTL_SMARTCARD_POWER           SCARD_CTL_CODE( 1)
#define IOCTL_SMARTCARD_GET_ATTRIBUTE   SCARD_CTL_CODE( 2)
#define IOCTL_SMARTCARD_SET_ATTRIBUTE   SCARD_CTL_CODE( 3)
#define IOCTL_SMARTCARD_CONFISCATE      SCARD_CTL_CODE( 4)
#define IOCTL_SMARTCARD_TRANSMIT        SCARD_CTL_CODE( 5)
#define IOCTL_SMARTCARD_EJECT           SCARD_CTL_CODE( 6)
#define IOCTL_SMARTCARD_SWALLOW         SCARD_CTL_CODE( 7)
// #define IOCTL_SMARTCARD_READ            SCARD_CTL_CODE( 8) obsolete
// #define IOCTL_SMARTCARD_WRITE           SCARD_CTL_CODE( 9) obsolete
#define IOCTL_SMARTCARD_IS_PRESENT      SCARD_CTL_CODE(10)
#define IOCTL_SMARTCARD_IS_ABSENT       SCARD_CTL_CODE(11)
#define IOCTL_SMARTCARD_SET_PROTOCOL    SCARD_CTL_CODE(12)
#define IOCTL_SMARTCARD_GET_STATE       SCARD_CTL_CODE(14)
#define IOCTL_SMARTCARD_GET_LAST_ERROR  SCARD_CTL_CODE(15)
#define IOCTL_SMARTCARD_GET_PERF_CNTR   SCARD_CTL_CODE(16)


//
///////////////////////////////////////////////////////////////////////////////
//
// Tags for requesting card and reader attributes
//

#define MAXIMUM_ATTR_STRING_LENGTH 32   // Nothing bigger than this from getAttr
#define MAXIMUM_SMARTCARD_READERS  10   // Limit the readers on the system

#define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag)))

#define SCARD_CLASS_VENDOR_INFO     1   // Vendor information definitions
#define SCARD_CLASS_COMMUNICATIONS  2   // Communication definitions
#define SCARD_CLASS_PROTOCOL        3   // Protocol definitions
#define SCARD_CLASS_POWER_MGMT      4   // Power Management definitions
#define SCARD_CLASS_SECURITY        5   // Security Assurance definitions
#define SCARD_CLASS_MECHANICAL      6   // Mechanical characteristic definitions
#define SCARD_CLASS_VENDOR_DEFINED  7   // Vendor specific definitions
#define SCARD_CLASS_IFD_PROTOCOL    8   // Interface Device Protocol options
#define SCARD_CLASS_ICC_STATE       9   // ICC State specific definitions
#define SCARD_CLASS_PERF       0x7ffe   // performace counters
#define SCARD_CLASS_SYSTEM     0x7fff   // System-specific definitions

#define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100)
#define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101)
#define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102)
#define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103)
#define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110)
#define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
// #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
#define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121)
#define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122)
#define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123)
#define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124)
#define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125)
// #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126)
#define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131)
#define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140)
#define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142)
#define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150)

#define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201)
#define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202)
#define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203)
#define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204)
#define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205)
#define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206)
#define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207)
#define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208)
#define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209)
#define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a)
#define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b)
#define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c)

#define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300)
#define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301)
#define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302)
#define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303)
#define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304)

#define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000)
#define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003)
#define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005)
#define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007)

#define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001)
#define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006)
#define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007)

#define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001)
#define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002)
#define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003)

#ifdef UNICODE
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W
#else
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A
#endif


//
// T=0 Protocol Defines
//

#define SCARD_T0_HEADER_LENGTH 7
#define SCARD_T0_CMD_LENGTH 5


//
// T=1 Protocol Defines
//

#define SCARD_T1_PROLOGUE_LENGTH 3
#define SCARD_T1_EPILOGUE_LENGTH 2
#define SCARD_T1_MAX_IFS 254


//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader states
//

#define SCARD_UNKNOWN     0   // This value implies the driver is unaware
                              // of the current state of the reader.
#define SCARD_ABSENT      1   // This value implies there is no card in
                              // the reader.
#define SCARD_PRESENT     2   // This value implies there is a card is
                              // present in the reader, but that it has
                              // not been moved into position for use.
#define SCARD_SWALLOWED   3   // This value implies there is a card in the
                              // reader in position for use.  The card is
                              // not powered.
#define SCARD_POWERED     4   // This value implies there is power is
                              // being provided to the card, but the
                              // Reader Driver is unaware of the mode of
                              // the card.
#define SCARD_NEGOTIABLE  5   // This value implies the card has been
                              // reset and is awaiting PTS negotiation.
#define SCARD_SPECIFIC    6   // This value implies the card has been
                              // reset and specific communication
                              // protocols have been established.

////////////////////////////////////////////////////////////////////////////////
//
//  I/O Services
//
//      The following services provide access to the I/O capabilities of the
//      reader drivers.  Services of the Smart Card are requested by placing the
//      following structure into the protocol buffer:
//


typedef struct _SCARD_IO_REQUEST{
    DWORD dwProtocol;   // Protocol identifier
    DWORD cbPciLength;  // Protocol Control Information Length
} SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST;
typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST;


//
// T=0 protocol services.
//

typedef struct {
    BYTE
        bCla,   // The instruction class
        bIns,   // The instruction code within the instruction class
        bP1,
        bP2,    // Parameters to the instruction
        bP3;    // Size of I/O Transfer
} SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND;

typedef struct {
    SCARD_IO_REQUEST ioRequest;
    BYTE
        bSw1,
        bSw2;           // Return codes from the instruction
    union
    {
        SCARD_T0_COMMAND CmdBytes;
        BYTE rgbHeader[5];
    } DUMMYUNIONNAME;
} SCARD_T0_REQUEST;

typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST;


//
//  T=1 Protocol Services
//

typedef struct {
    SCARD_IO_REQUEST ioRequest;
} SCARD_T1_REQUEST;
typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST;


//
////////////////////////////////////////////////////////////////////////////////
//
//  Driver attribute flags
//

#define SCARD_READER_SWALLOWS       0x00000001  // Reader has a card swallowing
                                                // mechanism.
#define SCARD_READER_EJECTS         0x00000002  // Reader has a card ejection
                                                // mechanism.
#define SCARD_READER_CONFISCATES    0x00000004  // Reader has a card capture
                                                // mechanism.

//
///////////////////////////////////////////////////////////////////////////////
//
// Type of reader
//
#define SCARD_READER_TYPE_SERIAL    0x01
#define SCARD_READER_TYPE_PARALELL  0x02
#define SCARD_READER_TYPE_KEYBOARD  0x04
#define SCARD_READER_TYPE_SCSI      0x08
#define SCARD_READER_TYPE_IDE       0x10
#define SCARD_READER_TYPE_USB       0x20
#define SCARD_READER_TYPE_PCMCIA    0x40
#define SCARD_READER_TYPE_VENDOR    0xF0

#ifdef __cplusplus
}
#endif
#endif

#! /bin/bash

make distclean

cp "./build/cackey_win64_build/lib/winscard.dll" "./build/cackey_win64_build/lib/WinSCard.dll"

./configure --with-pcsc-headers="$(pwd)/build/cackey_win64_build/include" --with-pcsc-libs="-L$(pwd)/build/cackey_win64_build/lib -lwinscard" --host=amd64-mingw32msvc CPPFLAGS="-I$(pwd)/build/cackey_win64_build/include" || exit 1

make || exit 1

rm -f "./build/cackey_win64_build/lib/WinSCard.dll"

exit 0

/*
 scarderr.mc

   Error message codes from the Smart Card Resource Manager
   These messages must be reconciled with winerror.w
   They exist here to provide error messages on pre-Win2K systems.

*/
#ifndef SCARD_S_SUCCESS
//
// =============================
// Facility SCARD Error Messages
// =============================
//
#define SCARD_S_SUCCESS NO_ERROR
//
//  Values are 32 bit values laid out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_SYSTEM                  0x0
#define FACILITY_SCARD                   0x10


//
// Define the severity codes
//
#define STATUS_SEVERITY_WARNING          0x2
#define STATUS_SEVERITY_INFORMATIONAL    0x1
#define STATUS_SEVERITY_ERROR            0x3


//
// MessageId: SCARD_F_INTERNAL_ERROR
//
// MessageText:
//
// An internal consistency check failed.
//
#define SCARD_F_INTERNAL_ERROR           ((DWORD)0x80100001L)

//
// MessageId: SCARD_E_CANCELLED
//
// MessageText:
//
// The action was cancelled by an SCardCancel request.
//
#define SCARD_E_CANCELLED                ((DWORD)0x80100002L)

//
// MessageId: SCARD_E_INVALID_HANDLE
//
// MessageText:
//
// The supplied handle was invalid.
//
#define SCARD_E_INVALID_HANDLE           ((DWORD)0x80100003L)

//
// MessageId: SCARD_E_INVALID_PARAMETER
//
// MessageText:
//
// One or more of the supplied parameters could not be properly interpreted.
//
#define SCARD_E_INVALID_PARAMETER        ((DWORD)0x80100004L)

//
// MessageId: SCARD_E_INVALID_TARGET
//
// MessageText:
//
// Registry startup information is missing or invalid.
//
#define SCARD_E_INVALID_TARGET           ((DWORD)0x80100005L)

//
// MessageId: SCARD_E_NO_MEMORY
//
// MessageText:
//
// Not enough memory available to complete this command.
//
#define SCARD_E_NO_MEMORY                ((DWORD)0x80100006L)

//
// MessageId: SCARD_F_WAITED_TOO_LONG
//
// MessageText:
//
// An internal consistency timer has expired.
//
#define SCARD_F_WAITED_TOO_LONG          ((DWORD)0x80100007L)

//
// MessageId: SCARD_E_INSUFFICIENT_BUFFER
//
// MessageText:
//
// The data buffer to receive returned data is too small for the returned data.
//
#define SCARD_E_INSUFFICIENT_BUFFER      ((DWORD)0x80100008L)

//
// MessageId: SCARD_E_UNKNOWN_READER
//
// MessageText:
//
// The specified reader name is not recognized.
//
#define SCARD_E_UNKNOWN_READER           ((DWORD)0x80100009L)

//
// MessageId: SCARD_E_TIMEOUT
//
// MessageText:
//
// The user-specified timeout value has expired.
//
#define SCARD_E_TIMEOUT                  ((DWORD)0x8010000AL)

//
// MessageId: SCARD_E_SHARING_VIOLATION
//
// MessageText:
//
// The smart card cannot be accessed because of other connections outstanding.
//
#define SCARD_E_SHARING_VIOLATION        ((DWORD)0x8010000BL)

//
// MessageId: SCARD_E_NO_SMARTCARD
//
// MessageText:
//
// The operation requires a Smart Card, but no Smart Card is currently in the device.
//
#define SCARD_E_NO_SMARTCARD             ((DWORD)0x8010000CL)

//
// MessageId: SCARD_E_UNKNOWN_CARD
//
// MessageText:
//
// The specified smart card name is not recognized.
//
#define SCARD_E_UNKNOWN_CARD             ((DWORD)0x8010000DL)

//
// MessageId: SCARD_E_CANT_DISPOSE
//
// MessageText:
//
// The system could not dispose of the media in the requested manner.
//
#define SCARD_E_CANT_DISPOSE             ((DWORD)0x8010000EL)

//
// MessageId: SCARD_E_PROTO_MISMATCH
//
// MessageText:
//
// The requested protocols are incompatible with the protocol currently in use with the smart card.
//
#define SCARD_E_PROTO_MISMATCH           ((DWORD)0x8010000FL)

//
// MessageId: SCARD_E_NOT_READY
//
// MessageText:
//
// The reader or smart card is not ready to accept commands.
//
#define SCARD_E_NOT_READY                ((DWORD)0x80100010L)

//
// MessageId: SCARD_E_INVALID_VALUE
//
// MessageText:
//
// One or more of the supplied parameters values could not be properly interpreted.
//
#define SCARD_E_INVALID_VALUE            ((DWORD)0x80100011L)

//
// MessageId: SCARD_E_SYSTEM_CANCELLED
//
// MessageText:
//
// The action was cancelled by the system, presumably to log off or shut down.
//
#define SCARD_E_SYSTEM_CANCELLED         ((DWORD)0x80100012L)

//
// MessageId: SCARD_F_COMM_ERROR
//
// MessageText:
//
// An internal communications error has been detected.
//
#define SCARD_F_COMM_ERROR               ((DWORD)0x80100013L)

//
// MessageId: SCARD_F_UNKNOWN_ERROR
//
// MessageText:
//
// An internal error has been detected, but the source is unknown.
//
#define SCARD_F_UNKNOWN_ERROR            ((DWORD)0x80100014L)

//
// MessageId: SCARD_E_INVALID_ATR
//
// MessageText:
//
// An ATR obtained from the registry is not a valid ATR string.
//
#define SCARD_E_INVALID_ATR              ((DWORD)0x80100015L)

//
// MessageId: SCARD_E_NOT_TRANSACTED
//
// MessageText:
//
// An attempt was made to end a non-existent transaction.
//
#define SCARD_E_NOT_TRANSACTED           ((DWORD)0x80100016L)

//
// MessageId: SCARD_E_READER_UNAVAILABLE
//
// MessageText:
//
// The specified reader is not currently available for use.
//
#define SCARD_E_READER_UNAVAILABLE       ((DWORD)0x80100017L)

//
// MessageId: SCARD_P_SHUTDOWN
//
// MessageText:
//
// The operation has been aborted to allow the server application to exit.
//
#define SCARD_P_SHUTDOWN                 ((DWORD)0x80100018L)

//
// MessageId: SCARD_E_PCI_TOO_SMALL
//
// MessageText:
//
// The PCI Receive buffer was too small.
//
#define SCARD_E_PCI_TOO_SMALL            ((DWORD)0x80100019L)

//
// MessageId: SCARD_E_READER_UNSUPPORTED
//
// MessageText:
//
// The reader driver does not meet minimal requirements for support.
//
#define SCARD_E_READER_UNSUPPORTED       ((DWORD)0x8010001AL)

//
// MessageId: SCARD_E_DUPLICATE_READER
//
// MessageText:
//
// The reader driver did not produce a unique reader name.
//
#define SCARD_E_DUPLICATE_READER         ((DWORD)0x8010001BL)

//
// MessageId: SCARD_E_CARD_UNSUPPORTED
//
// MessageText:
//
// The smart card does not meet minimal requirements for support.
//
#define SCARD_E_CARD_UNSUPPORTED         ((DWORD)0x8010001CL)

//
// MessageId: SCARD_E_NO_SERVICE
//
// MessageText:
//
// The Smart card resource manager is not running.
//
#define SCARD_E_NO_SERVICE               ((DWORD)0x8010001DL)

//
// MessageId: SCARD_E_SERVICE_STOPPED
//
// MessageText:
//
// The Smart card resource manager has shut down.
//
#define SCARD_E_SERVICE_STOPPED          ((DWORD)0x8010001EL)

//
// MessageId: SCARD_E_UNEXPECTED
//
// MessageText:
//
// An unexpected card error has occurred.
//
#define SCARD_E_UNEXPECTED               ((DWORD)0x8010001FL)

//
// MessageId: SCARD_E_ICC_INSTALLATION
//
// MessageText:
//
// No Primary Provider can be found for the smart card.
//
#define SCARD_E_ICC_INSTALLATION         ((DWORD)0x80100020L)

//
// MessageId: SCARD_E_ICC_CREATEORDER
//
// MessageText:
//
// The requested order of object creation is not supported.
//
#define SCARD_E_ICC_CREATEORDER          ((DWORD)0x80100021L)

//
// MessageId: SCARD_E_UNSUPPORTED_FEATURE
//
// MessageText:
//
// This smart card does not support the requested feature.
//
#define SCARD_E_UNSUPPORTED_FEATURE      ((DWORD)0x80100022L)

//
// MessageId: SCARD_E_DIR_NOT_FOUND
//
// MessageText:
//
// The identified directory does not exist in the smart card.
//
#define SCARD_E_DIR_NOT_FOUND            ((DWORD)0x80100023L)

//
// MessageId: SCARD_E_FILE_NOT_FOUND
//
// MessageText:
//
// The identified file does not exist in the smart card.
//
#define SCARD_E_FILE_NOT_FOUND           ((DWORD)0x80100024L)

//
// MessageId: SCARD_E_NO_DIR
//
// MessageText:
//
// The supplied path does not represent a smart card directory.
//
#define SCARD_E_NO_DIR                   ((DWORD)0x80100025L)

//
// MessageId: SCARD_E_NO_FILE
//
// MessageText:
//
// The supplied path does not represent a smart card file.
//
#define SCARD_E_NO_FILE                  ((DWORD)0x80100026L)

//
// MessageId: SCARD_E_NO_ACCESS
//
// MessageText:
//
// Access is denied to this file.
//
#define SCARD_E_NO_ACCESS                ((DWORD)0x80100027L)

//
// MessageId: SCARD_E_WRITE_TOO_MANY
//
// MessageText:
//
// The smartcard does not have enough memory to store the information.
//
#define SCARD_E_WRITE_TOO_MANY           ((DWORD)0x80100028L)

//
// MessageId: SCARD_E_BAD_SEEK
//
// MessageText:
//
// There was an error trying to set the smart card file object pointer.
//
#define SCARD_E_BAD_SEEK                 ((DWORD)0x80100029L)

//
// MessageId: SCARD_E_INVALID_CHV
//
// MessageText:
//
// The supplied PIN is incorrect.
//
#define SCARD_E_INVALID_CHV              ((DWORD)0x8010002AL)

//
// MessageId: SCARD_E_UNKNOWN_RES_MNG
//
// MessageText:
//
// An unrecognized error code was returned from a layered component.
//
#define SCARD_E_UNKNOWN_RES_MNG          ((DWORD)0x8010002BL)

//
// MessageId: SCARD_E_NO_SUCH_CERTIFICATE
//
// MessageText:
//
// The requested certificate does not exist.
//
#define SCARD_E_NO_SUCH_CERTIFICATE      ((DWORD)0x8010002CL)

//
// MessageId: SCARD_E_CERTIFICATE_UNAVAILABLE
//
// MessageText:
//
// The requested certificate could not be obtained.
//
#define SCARD_E_CERTIFICATE_UNAVAILABLE  ((DWORD)0x8010002DL)

//
// MessageId: SCARD_E_NO_READERS_AVAILABLE
//
// MessageText:
//
// Cannot find a smart card reader.
//
#define SCARD_E_NO_READERS_AVAILABLE     ((DWORD)0x8010002EL)

//
// MessageId: SCARD_E_COMM_DATA_LOST
//
// MessageText:
//
// A communications error with the smart card has been detected.  Retry the operation.
//
#define SCARD_E_COMM_DATA_LOST           ((DWORD)0x8010002FL)

//
// MessageId: SCARD_E_NO_KEY_CONTAINER
//
// MessageText:
//
// The requested key container does not exist on the smart card.
//
#define SCARD_E_NO_KEY_CONTAINER         ((DWORD)0x80100030L)

//
// MessageId: SCARD_E_SERVER_TOO_BUSY
//
// MessageText:
//
// The Smart card resource manager is too busy to complete this operation.
//
#define SCARD_E_SERVER_TOO_BUSY          ((DWORD)0x80100031L)

//
// MessageId: SCARD_E_PIN_CACHE_EXPIRED
//
// MessageText:
//
// The smart card PIN cache has expired.
//
#define SCARD_E_PIN_CACHE_EXPIRED        ((DWORD)0x80100032L)

//
// MessageId: SCARD_E_NO_PIN_CACHE
//
// MessageText:
//
// The smart card PIN cannot be cached.
//
#define SCARD_E_NO_PIN_CACHE             ((DWORD)0x80100033L)

//
// MessageId: SCARD_E_READ_ONLY_CARD
//
// MessageText:
//
// The smart card is read only and cannot be written to.
//
#define SCARD_E_READ_ONLY_CARD           ((DWORD)0x80100034L)

//
// These are warning codes.
//
//
// MessageId: SCARD_W_UNSUPPORTED_CARD
//
// MessageText:
//
// The reader cannot communicate with the smart card, due to ATR configuration conflicts.
//
#define SCARD_W_UNSUPPORTED_CARD         ((DWORD)0x80100065L)

//
// MessageId: SCARD_W_UNRESPONSIVE_CARD
//
// MessageText:
//
// The smart card is not responding to a reset.
//
#define SCARD_W_UNRESPONSIVE_CARD        ((DWORD)0x80100066L)

//
// MessageId: SCARD_W_UNPOWERED_CARD
//
// MessageText:
//
// Power has been removed from the smart card, so that further communication is not possible.
//
#define SCARD_W_UNPOWERED_CARD           ((DWORD)0x80100067L)

//
// MessageId: SCARD_W_RESET_CARD
//
// MessageText:
//
// The smart card has been reset, so any shared state information is invalid.
//
#define SCARD_W_RESET_CARD               ((DWORD)0x80100068L)

//
// MessageId: SCARD_W_REMOVED_CARD
//
// MessageText:
//
// The smart card has been removed, so that further communication is not possible.
//
#define SCARD_W_REMOVED_CARD             ((DWORD)0x80100069L)

//
// MessageId: SCARD_W_SECURITY_VIOLATION
//
// MessageText:
//
// Access was denied because of a security violation.
//
#define SCARD_W_SECURITY_VIOLATION       ((DWORD)0x8010006AL)

//
// MessageId: SCARD_W_WRONG_CHV
//
// MessageText:
//
// The card cannot be accessed because the wrong PIN was presented.
//
#define SCARD_W_WRONG_CHV                ((DWORD)0x8010006BL)

//
// MessageId: SCARD_W_CHV_BLOCKED
//
// MessageText:
//
// The card cannot be accessed because the maximum number of PIN entry attempts has been reached.
//
#define SCARD_W_CHV_BLOCKED              ((DWORD)0x8010006CL)

//
// MessageId: SCARD_W_EOF
//
// MessageText:
//
// The end of the smart card file has been reached.
//
#define SCARD_W_EOF                      ((DWORD)0x8010006DL)

//
// MessageId: SCARD_W_CANCELLED_BY_USER
//
// MessageText:
//
// The action was cancelled by the user.
//
#define SCARD_W_CANCELLED_BY_USER        ((DWORD)0x8010006EL)

//
// MessageId: SCARD_W_CARD_NOT_AUTHENTICATED
//
// MessageText:
//
// No PIN was presented to the smart card.
//
#define SCARD_W_CARD_NOT_AUTHENTICATED   ((DWORD)0x8010006FL)

//
// MessageId: SCARD_W_CACHE_ITEM_NOT_FOUND
//
// MessageText:
//
// The requested item could not be found in the cache.
//
#define SCARD_W_CACHE_ITEM_NOT_FOUND     ((DWORD)0x80100070L)

//
// MessageId: SCARD_W_CACHE_ITEM_STALE
//
// MessageText:
//
// The requested cache item is too old and was deleted from the cache.
//
#define SCARD_W_CACHE_ITEM_STALE         ((DWORD)0x80100071L)

//
// MessageId: SCARD_W_CACHE_ITEM_TOO_BIG
//
// MessageText:
//
// The new cache item exceeds the maximum per-item size defined for the cache.
//
#define SCARD_W_CACHE_ITEM_TOO_BIG       ((DWORD)0x80100072L)

#endif // SCARD_S_SUCCESS

#include <windows.h>

/*++

Copyright (c) 1996  Microsoft Corporation

Module Name:

    WinSCard

Abstract:

    This header file provides the definitions and symbols necessary for an
    Application or Smart Card Service Provider to access the Smartcard
    Subsystem.

Environment:

    Win32

Notes:

--*/

#ifndef _WINSCARD_H_
#define _WINSCARD_H_

#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif

#include <wtypes.h>
#include <winioctl.h>
#include "winsmcrd.h"
#ifndef SCARD_S_SUCCESS
#include "SCardErr.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif

#ifndef _LPCBYTE_DEFINED
#define _LPCBYTE_DEFINED
typedef const BYTE *LPCBYTE;
#endif
#ifndef _LPCVOID_DEFINED
#define _LPCVOID_DEFINED
typedef const VOID *LPCVOID;
#endif

#ifndef WINSCARDAPI
#define WINSCARDAPI
#endif
#ifndef WINSCARDDATA
#define WINSCARDDATA __declspec(dllimport)
#endif

/* In clr:pure we cannot mark data export with dllimport.
 * We should add small functions which returns the value of
 * the global.
 */
#if !defined(_M_CEE_PURE)
WINSCARDDATA extern const SCARD_IO_REQUEST
    g_rgSCardT0Pci,
    g_rgSCardT1Pci,
    g_rgSCardRawPci;
#define SCARD_PCI_T0  (&g_rgSCardT0Pci)
#define SCARD_PCI_T1  (&g_rgSCardT1Pci)
#define SCARD_PCI_RAW (&g_rgSCardRawPci)
#endif

//
////////////////////////////////////////////////////////////////////////////////
//
//  Service Manager Access Services
//
//      The following services are used to manage user and terminal contexts for
//      Smart Cards.
//

typedef ULONG_PTR SCARDCONTEXT;
typedef SCARDCONTEXT *PSCARDCONTEXT, *LPSCARDCONTEXT;

typedef ULONG_PTR SCARDHANDLE;
typedef SCARDHANDLE *PSCARDHANDLE, *LPSCARDHANDLE;

#define SCARD_AUTOALLOCATE (DWORD)(-1)

#define SCARD_SCOPE_USER     0  // The context is a user context, and any
                                // database operations are performed within the
                                // domain of the user.
#define SCARD_SCOPE_TERMINAL 1  // The context is that of the current terminal,
                                // and any database operations are performed
                                // within the domain of that terminal.  (The
                                // calling application must have appropriate
                                // access permissions for any database actions.)
#define SCARD_SCOPE_SYSTEM    2 // The context is the system context, and any
                                // database operations are performed within the
                                // domain of the system.  (The calling
                                // application must have appropriate access
                                // permissions for any database actions.)

extern WINSCARDAPI LONG WINAPI
SCardEstablishContext(
    __in  DWORD dwScope,
    __reserved  LPCVOID pvReserved1,
    __reserved  LPCVOID pvReserved2,
    __out LPSCARDCONTEXT phContext);

extern WINSCARDAPI LONG WINAPI
SCardReleaseContext(
    __in      SCARDCONTEXT hContext);

extern WINSCARDAPI LONG WINAPI
SCardIsValidContext(
    __in      SCARDCONTEXT hContext);


//
////////////////////////////////////////////////////////////////////////////////
//
//  Smart Card Database Management Services
//
//      The following services provide for managing the Smart Card Database.
//

#define SCARD_ALL_READERS       TEXT("SCard$AllReaders\000")
#define SCARD_DEFAULT_READERS   TEXT("SCard$DefaultReaders\000")
#define SCARD_LOCAL_READERS     TEXT("SCard$LocalReaders\000")
#define SCARD_SYSTEM_READERS    TEXT("SCard$SystemReaders\000")

#define SCARD_PROVIDER_PRIMARY  1   // Primary Provider Id
#define SCARD_PROVIDER_CSP      2   // Crypto Service Provider Id
#define SCARD_PROVIDER_KSP      3   // Key Storage Provider Id


//
// Database Reader routines
//

extern WINSCARDAPI LONG WINAPI
SCardListReaderGroupsA(
    __in    SCARDCONTEXT hContext,
    __nullnullterminated __out_ecount_opt(*pcchGroups)   LPSTR mszGroups,
    __inout LPDWORD pcchGroups);
extern WINSCARDAPI LONG WINAPI
SCardListReaderGroupsW(
    __in    SCARDCONTEXT hContext,
    __nullnullterminated __out_ecount_opt(*pcchGroups)   LPWSTR mszGroups,
    __inout LPDWORD pcchGroups);
#ifdef UNICODE
#define SCardListReaderGroups  SCardListReaderGroupsW
#else
#define SCardListReaderGroups  SCardListReaderGroupsA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardListReadersA(
    __in     SCARDCONTEXT hContext,
    __in_opt LPCSTR mszGroups,
    __nullnullterminated __out_ecount_opt(*pcchReaders) LPSTR mszReaders,
    __inout  LPDWORD pcchReaders);
extern WINSCARDAPI LONG WINAPI
SCardListReadersW(
    __in     SCARDCONTEXT hContext,
    __in_opt LPCWSTR mszGroups,
    __nullnullterminated __out_ecount_opt(*pcchReaders) LPWSTR mszReaders,
    __inout  LPDWORD pcchReaders);
#ifdef UNICODE
#define SCardListReaders  SCardListReadersW
#else
#define SCardListReaders  SCardListReadersA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardListCardsA(
    __in      SCARDCONTEXT hContext,
    __in_opt  LPCBYTE pbAtr,
    __in_ecount_opt(cguidInterfaceCount)  LPCGUID rgquidInterfaces,
    __in      DWORD cguidInterfaceCount,
    __nullnullterminated __out_ecount_opt(*pcchCards) LPSTR mszCards,
    __inout   LPDWORD pcchCards);
extern WINSCARDAPI LONG WINAPI
SCardListCardsW(
    __in      SCARDCONTEXT hContext,
    __in_opt  LPCBYTE pbAtr,
    __in_ecount_opt(cguidInterfaceCount)  LPCGUID rgquidInterfaces,
    __in      DWORD cguidInterfaceCount,
    __nullnullterminated __out_ecount_opt(*pcchCards) LPWSTR mszCards,
    __inout   LPDWORD pcchCards);
#ifdef UNICODE
#define SCardListCards  SCardListCardsW
#else
#define SCardListCards  SCardListCardsA
#endif // !UNICODE
//
// NOTE:    The routine SCardListCards name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardListCardTypes(
//                  __in      SCARDCONTEXT hContext,
//                  __in_opt  LPCBYTE pbAtr,
//                  __in_opt  LPCGUID rgquidInterfaces,
//                  __in      DWORD cguidInterfaceCount,
//                  __out_opt LPTSTR mszCards,
//                  __inout   LPDWORD pcchCards);
//
//          Here's a work-around MACRO:
#define SCardListCardTypes SCardListCards

extern WINSCARDAPI LONG WINAPI
SCardListInterfacesA(
    __in     SCARDCONTEXT hContext,
    __in     LPCSTR szCard,
    __out    LPGUID pguidInterfaces,
    __inout  LPDWORD pcguidInterfaces);
extern WINSCARDAPI LONG WINAPI
SCardListInterfacesW(
    __in     SCARDCONTEXT hContext,
    __in     LPCWSTR szCard,
    __out    LPGUID pguidInterfaces,
    __inout  LPDWORD pcguidInterfaces);
#ifdef UNICODE
#define SCardListInterfaces  SCardListInterfacesW
#else
#define SCardListInterfaces  SCardListInterfacesA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardGetProviderIdA(
    __in     SCARDCONTEXT hContext,
    __in     LPCSTR szCard,
    __out    LPGUID pguidProviderId);
extern WINSCARDAPI LONG WINAPI
SCardGetProviderIdW(
    __in     SCARDCONTEXT hContext,
    __in     LPCWSTR szCard,
    __out    LPGUID pguidProviderId);
#ifdef UNICODE
#define SCardGetProviderId  SCardGetProviderIdW
#else
#define SCardGetProviderId  SCardGetProviderIdA
#endif // !UNICODE
//
// NOTE:    The routine SCardGetProviderId in this implementation uses GUIDs.
//          The PC/SC definition uses BYTEs.
//

extern WINSCARDAPI LONG WINAPI
SCardGetCardTypeProviderNameA(
    __in      SCARDCONTEXT hContext,
    __in      LPCSTR szCardName,
    __in      DWORD dwProviderId,
    __out_ecount_opt(*pcchProvider) LPSTR szProvider,
    __inout   LPDWORD pcchProvider);
extern WINSCARDAPI LONG WINAPI
SCardGetCardTypeProviderNameW(
    __in      SCARDCONTEXT hContext,
    __in      LPCWSTR szCardName,
    __in      DWORD dwProviderId,
    __out_ecount_opt(*pcchProvider) LPWSTR szProvider,
    __inout   LPDWORD pcchProvider);
#ifdef UNICODE
#define SCardGetCardTypeProviderName  SCardGetCardTypeProviderNameW
#else
#define SCardGetCardTypeProviderName  SCardGetCardTypeProviderNameA
#endif // !UNICODE
//
// NOTE:    This routine is an extension to the PC/SC definitions.
//


//
// Database Writer routines
//

extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderGroupA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderGroupW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardIntroduceReaderGroup  SCardIntroduceReaderGroupW
#else
#define SCardIntroduceReaderGroup  SCardIntroduceReaderGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardForgetReaderGroupA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardForgetReaderGroupW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardForgetReaderGroup  SCardForgetReaderGroupW
#else
#define SCardForgetReaderGroup  SCardForgetReaderGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szReaderName,
    __in LPCSTR szDeviceName);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceReaderW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szReaderName,
    __in LPCWSTR szDeviceName);
#ifdef UNICODE
#define SCardIntroduceReader  SCardIntroduceReaderW
#else
#define SCardIntroduceReader  SCardIntroduceReaderA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardForgetReaderA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szReaderName);
extern WINSCARDAPI LONG WINAPI
SCardForgetReaderW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szReaderName);
#ifdef UNICODE
#define SCardForgetReader  SCardForgetReaderW
#else
#define SCardForgetReader  SCardForgetReaderA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardAddReaderToGroupA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szReaderName,
    __in LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardAddReaderToGroupW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szReaderName,
    __in LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardAddReaderToGroup  SCardAddReaderToGroupW
#else
#define SCardAddReaderToGroup  SCardAddReaderToGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardRemoveReaderFromGroupA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szReaderName,
    __in LPCSTR szGroupName);
extern WINSCARDAPI LONG WINAPI
SCardRemoveReaderFromGroupW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szReaderName,
    __in LPCWSTR szGroupName);
#ifdef UNICODE
#define SCardRemoveReaderFromGroup  SCardRemoveReaderFromGroupW
#else
#define SCardRemoveReaderFromGroup  SCardRemoveReaderFromGroupA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardIntroduceCardTypeA(
    __in     SCARDCONTEXT hContext,
    __in     LPCSTR szCardName,
    __in_opt LPCGUID pguidPrimaryProvider,
    __in_opt LPCGUID rgguidInterfaces,
    __in     DWORD dwInterfaceCount,
    __in     LPCBYTE pbAtr,
    __in     LPCBYTE pbAtrMask,
    __in     DWORD cbAtrLen);
extern WINSCARDAPI LONG WINAPI
SCardIntroduceCardTypeW(
    __in     SCARDCONTEXT hContext,
    __in     LPCWSTR szCardName,
    __in_opt LPCGUID pguidPrimaryProvider,
    __in_opt LPCGUID rgguidInterfaces,
    __in     DWORD dwInterfaceCount,
    __in     LPCBYTE pbAtr,
    __in     LPCBYTE pbAtrMask,
    __in     DWORD cbAtrLen);
#ifdef UNICODE
#define SCardIntroduceCardType  SCardIntroduceCardTypeW
#else
#define SCardIntroduceCardType  SCardIntroduceCardTypeA
#endif // !UNICODE
//
// NOTE:    The routine SCardIntroduceCardType's parameters' order differs from
//          the PC/SC definition.  It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardIntroduceCardType(
//                  __in     SCARDCONTEXT hContext,
//                  __in     LPCTSTR szCardName,
//                  __in     LPCBYTE pbAtr,
//                  __in     LPCBYTE pbAtrMask,
//                  __in     DWORD cbAtrLen,
//                  __in_opt LPCGUID pguidPrimaryProvider,
//                  __in_opt LPCGUID rgguidInterfaces,
//                  __in     DWORD dwInterfaceCount);
//
//          Here's a work-around MACRO:
#define PCSCardIntroduceCardType(hContext, szCardName, pbAtr, pbAtrMask, cbAtrLen, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount) \
          SCardIntroduceCardType(hContext, szCardName, pguidPrimaryProvider, rgguidInterfaces, dwInterfaceCount, pbAtr, pbAtrMask, cbAtrLen)

extern WINSCARDAPI LONG WINAPI
SCardSetCardTypeProviderNameA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szCardName,
    __in DWORD dwProviderId,
    __in LPCSTR szProvider);
extern WINSCARDAPI LONG WINAPI
SCardSetCardTypeProviderNameW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szCardName,
    __in DWORD dwProviderId,
    __in LPCWSTR szProvider);
#ifdef UNICODE
#define SCardSetCardTypeProviderName  SCardSetCardTypeProviderNameW
#else
#define SCardSetCardTypeProviderName  SCardSetCardTypeProviderNameA
#endif // !UNICODE
//
// NOTE:    This routine is an extention to the PC/SC specifications.
//

extern WINSCARDAPI LONG WINAPI
SCardForgetCardTypeA(
    __in SCARDCONTEXT hContext,
    __in LPCSTR szCardName);
extern WINSCARDAPI LONG WINAPI
SCardForgetCardTypeW(
    __in SCARDCONTEXT hContext,
    __in LPCWSTR szCardName);
#ifdef UNICODE
#define SCardForgetCardType  SCardForgetCardTypeW
#else
#define SCardForgetCardType  SCardForgetCardTypeA
#endif // !UNICODE


//
////////////////////////////////////////////////////////////////////////////////
//
//  Service Manager Support Routines
//
//      The following services are supplied to simplify the use of the Service
//      Manager API.
//

extern WINSCARDAPI LONG WINAPI
SCardFreeMemory(
    __in SCARDCONTEXT hContext,
    __in LPCVOID pvMem);

#if (NTDDI_VERSION >= NTDDI_WINXP)
extern WINSCARDAPI HANDLE WINAPI
SCardAccessStartedEvent(void);

extern WINSCARDAPI void WINAPI
SCardReleaseStartedEvent(void);
#endif // (NTDDI_VERSION >= NTDDI_WINXP)

//
////////////////////////////////////////////////////////////////////////////////
//
//  Reader Services
//
//      The following services supply means for tracking cards within readers.
//

typedef struct {
    LPCSTR      szReader;       // reader name
    LPVOID      pvUserData;     // user defined data
    DWORD       dwCurrentState; // current state of reader at time of call
    DWORD       dwEventState;   // state of reader after state change
    DWORD       cbAtr;          // Number of bytes in the returned ATR.
    BYTE        rgbAtr[36];     // Atr of inserted card, (extra alignment bytes)
} SCARD_READERSTATEA, *PSCARD_READERSTATEA, *LPSCARD_READERSTATEA;
typedef struct {
    LPCWSTR     szReader;       // reader name
    LPVOID      pvUserData;     // user defined data
    DWORD       dwCurrentState; // current state of reader at time of call
    DWORD       dwEventState;   // state of reader after state change
    DWORD       cbAtr;          // Number of bytes in the returned ATR.
    BYTE        rgbAtr[36];     // Atr of inserted card, (extra alignment bytes)
} SCARD_READERSTATEW, *PSCARD_READERSTATEW, *LPSCARD_READERSTATEW;
#ifdef UNICODE
typedef SCARD_READERSTATEW SCARD_READERSTATE;
typedef PSCARD_READERSTATEW PSCARD_READERSTATE;
typedef LPSCARD_READERSTATEW LPSCARD_READERSTATE;
#else
typedef SCARD_READERSTATEA SCARD_READERSTATE;
typedef PSCARD_READERSTATEA PSCARD_READERSTATE;
typedef LPSCARD_READERSTATEA LPSCARD_READERSTATE;
#endif // UNICODE

// Backwards compatibility macros
#define SCARD_READERSTATE_A SCARD_READERSTATEA
#define SCARD_READERSTATE_W SCARD_READERSTATEW
#define PSCARD_READERSTATE_A PSCARD_READERSTATEA
#define PSCARD_READERSTATE_W PSCARD_READERSTATEW
#define LPSCARD_READERSTATE_A LPSCARD_READERSTATEA
#define LPSCARD_READERSTATE_W LPSCARD_READERSTATEW

#define SCARD_STATE_UNAWARE     0x00000000  // The application is unaware of the
                                            // current state, and would like to
                                            // know.  The use of this value
                                            // results in an immediate return
                                            // from state transition monitoring
                                            // services.  This is represented by
                                            // all bits set to zero.
#define SCARD_STATE_IGNORE      0x00000001  // The application requested that
                                            // this reader be ignored.  No other
                                            // bits will be set.
#define SCARD_STATE_CHANGED     0x00000002  // This implies that there is a
                                            // difference between the state
                                            // believed by the application, and
                                            // the state known by the Service
                                            // Manager.  When this bit is set,
                                            // the application may assume a
                                            // significant state change has
                                            // occurred on this reader.
#define SCARD_STATE_UNKNOWN     0x00000004  // This implies that the given
                                            // reader name is not recognized by
                                            // the Service Manager.  If this bit
                                            // is set, then SCARD_STATE_CHANGED
                                            // and SCARD_STATE_IGNORE will also
                                            // be set.
#define SCARD_STATE_UNAVAILABLE 0x00000008  // This implies that the actual
                                            // state of this reader is not
                                            // available.  If this bit is set,
                                            // then all the following bits are
                                            // clear.
#define SCARD_STATE_EMPTY       0x00000010  // This implies that there is not
                                            // card in the reader.  If this bit
                                            // is set, all the following bits
                                            // will be clear.
#define SCARD_STATE_PRESENT     0x00000020  // This implies that there is a card
                                            // in the reader.
#define SCARD_STATE_ATRMATCH    0x00000040  // This implies that there is a card
                                            // in the reader with an ATR
                                            // matching one of the target cards.
                                            // If this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.  This bit is only returned
                                            // on the SCardLocateCard() service.
#define SCARD_STATE_EXCLUSIVE   0x00000080  // This implies that the card in the
                                            // reader is allocated for exclusive
                                            // use by another application.  If
                                            // this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.
#define SCARD_STATE_INUSE       0x00000100  // This implies that the card in the
                                            // reader is in use by one or more
                                            // other applications, but may be
                                            // connected to in shared mode.  If
                                            // this bit is set,
                                            // SCARD_STATE_PRESENT will also be
                                            // set.
#define SCARD_STATE_MUTE        0x00000200  // This implies that the card in the
                                            // reader is unresponsive or not
                                            // supported by the reader or
                                            // software.
#define SCARD_STATE_UNPOWERED   0x00000400  // This implies that the card in the
                                            // reader has not been powered up.

extern WINSCARDAPI LONG WINAPI
SCardLocateCardsA(
    __in    SCARDCONTEXT hContext,
    __in    LPCSTR mszCards,
    __inout LPSCARD_READERSTATEA rgReaderStates,
    __in    DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardLocateCardsW(
    __in    SCARDCONTEXT hContext,
    __in    LPCWSTR mszCards,
    __inout LPSCARD_READERSTATEW rgReaderStates,
    __in    DWORD cReaders);
#ifdef UNICODE
#define SCardLocateCards  SCardLocateCardsW
#else
#define SCardLocateCards  SCardLocateCardsA
#endif // !UNICODE

#if (NTDDI_VERSION >= NTDDI_WINXP)
typedef struct _SCARD_ATRMASK {
    DWORD       cbAtr;          // Number of bytes in the ATR and the mask.
    BYTE        rgbAtr[36];     // Atr of card (extra alignment bytes)
    BYTE        rgbMask[36];    // Mask for the Atr (extra alignment bytes)
} SCARD_ATRMASK, *PSCARD_ATRMASK, *LPSCARD_ATRMASK;


extern WINSCARDAPI LONG WINAPI
SCardLocateCardsByATRA(
    __in    SCARDCONTEXT hContext,
    __in    LPSCARD_ATRMASK rgAtrMasks,
    __in    DWORD cAtrs,
    __inout LPSCARD_READERSTATEA rgReaderStates,
    __in    DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardLocateCardsByATRW(
    __in    SCARDCONTEXT hContext,
    __in    LPSCARD_ATRMASK rgAtrMasks,
    __in    DWORD cAtrs,
    __inout LPSCARD_READERSTATEW rgReaderStates,
    __in    DWORD cReaders);
#ifdef UNICODE
#define SCardLocateCardsByATR  SCardLocateCardsByATRW
#else
#define SCardLocateCardsByATR  SCardLocateCardsByATRA
#endif // !UNICODE
#endif // (NTDDI_VERSION >= NTDDI_WINXP)

extern WINSCARDAPI LONG WINAPI
SCardGetStatusChangeA(
    __in    SCARDCONTEXT hContext,
    __in    DWORD dwTimeout,
    __inout LPSCARD_READERSTATEA rgReaderStates,
    __in    DWORD cReaders);
extern WINSCARDAPI LONG WINAPI
SCardGetStatusChangeW(
    __in    SCARDCONTEXT hContext,
    __in    DWORD dwTimeout,
    __inout LPSCARD_READERSTATEW rgReaderStates,
    __in    DWORD cReaders);
#ifdef UNICODE
#define SCardGetStatusChange  SCardGetStatusChangeW
#else
#define SCardGetStatusChange  SCardGetStatusChangeA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardCancel(
    __in    SCARDCONTEXT hContext);


//
////////////////////////////////////////////////////////////////////////////////
//
//  Card/Reader Communication Services
//
//      The following services provide means for communication with the card.
//

#define SCARD_SHARE_EXCLUSIVE 1 // This application is not willing to share this
                                // card with other applications.
#define SCARD_SHARE_SHARED    2 // This application is willing to share this
                                // card with other applications.
#define SCARD_SHARE_DIRECT    3 // This application demands direct control of
                                // the reader, so it is not available to other
                                // applications.

#define SCARD_LEAVE_CARD      0 // Don't do anything special on close
#define SCARD_RESET_CARD      1 // Reset the card on close
#define SCARD_UNPOWER_CARD    2 // Power down the card on close
#define SCARD_EJECT_CARD      3 // Eject the card on close

extern WINSCARDAPI LONG WINAPI
SCardConnectA(
    __in    SCARDCONTEXT hContext,
    __in    LPCSTR szReader,
    __in    DWORD dwShareMode,
    __in    DWORD dwPreferredProtocols,
    __out   LPSCARDHANDLE phCard,
    __out   LPDWORD pdwActiveProtocol);
extern WINSCARDAPI LONG WINAPI
SCardConnectW(
    __in    SCARDCONTEXT hContext,
    __in    LPCWSTR szReader,
    __in    DWORD dwShareMode,
    __in    DWORD dwPreferredProtocols,
    __out   LPSCARDHANDLE phCard,
    __out   LPDWORD pdwActiveProtocol);
#ifdef UNICODE
#define SCardConnect  SCardConnectW
#else
#define SCardConnect  SCardConnectA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardReconnect(
    __in      SCARDHANDLE hCard,
    __in      DWORD dwShareMode,
    __in      DWORD dwPreferredProtocols,
    __in      DWORD dwInitialization,
    __out_opt LPDWORD pdwActiveProtocol);

extern WINSCARDAPI LONG WINAPI
SCardDisconnect(
    __in    SCARDHANDLE hCard,
    __in    DWORD dwDisposition);

extern WINSCARDAPI LONG WINAPI
SCardBeginTransaction(
    __in    SCARDHANDLE hCard);

extern WINSCARDAPI LONG WINAPI
SCardEndTransaction(
    __in    SCARDHANDLE hCard,
    __in    DWORD dwDisposition);

extern WINSCARDAPI LONG WINAPI
SCardCancelTransaction(
    __in    SCARDHANDLE hCard);
//
// NOTE:    This call corresponds to the PC/SC SCARDCOMM::Cancel routine,
//          terminating a blocked SCardBeginTransaction service.
//


extern WINSCARDAPI LONG WINAPI
SCardState(
    __in    SCARDHANDLE hCard,
    __out   LPDWORD pdwState,
    __out   LPDWORD pdwProtocol,
    __out_bcount(*pcbAtrLen)   LPBYTE pbAtr,
    __inout LPDWORD pcbAtrLen);
//
// NOTE:    SCardState is an obsolete routine.  PC/SC has replaced it with
//          SCardStatus.
//

extern WINSCARDAPI LONG WINAPI
SCardStatusA(
    __in        SCARDHANDLE hCard,
    __nullnullterminated __out_ecount_opt(*pcchReaderLen) LPSTR mszReaderNames,
    __inout_opt LPDWORD pcchReaderLen,
    __out_opt   LPDWORD pdwState,
    __out_opt   LPDWORD pdwProtocol,
    __out_ecount_opt(*pcbAtrLen) LPBYTE pbAtr,
    __inout_opt LPDWORD pcbAtrLen);
extern WINSCARDAPI LONG WINAPI
SCardStatusW(
    __in        SCARDHANDLE hCard,
    __nullnullterminated __out_ecount_opt(*pcchReaderLen) LPWSTR mszReaderNames,
    __inout_opt LPDWORD pcchReaderLen,
    __out_opt   LPDWORD pdwState,
    __out_opt   LPDWORD pdwProtocol,
    __out_ecount_opt(*pcbAtrLen) LPBYTE pbAtr,
    __inout_opt LPDWORD pcbAtrLen);
#ifdef UNICODE
#define SCardStatus  SCardStatusW
#else
#define SCardStatus  SCardStatusA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardTransmit(
    __in        SCARDHANDLE hCard,
    __in        LPCSCARD_IO_REQUEST pioSendPci,
    __in_bcount(cbSendLength) LPCBYTE pbSendBuffer,
    __in        DWORD cbSendLength,
    __inout_opt LPSCARD_IO_REQUEST pioRecvPci,
    __out_bcount(*pcbRecvLength) LPBYTE pbRecvBuffer,
    __inout     LPDWORD pcbRecvLength);

#if (NTDDI_VERSION >= NTDDI_VISTA)
extern WINSCARDAPI LONG WINAPI
SCardGetTransmitCount(
    __in SCARDHANDLE hCard,
    __out LPDWORD pcTransmitCount);
#endif // (NTDDI_VERSION >= NTDDI_VISTA)

//
////////////////////////////////////////////////////////////////////////////////
//
//  Reader Control Routines
//
//      The following services provide for direct, low-level manipulation of the
//      reader by the calling application allowing it control over the
//      attributes of the communications with the card.
//

extern WINSCARDAPI LONG WINAPI
SCardControl(
    __in    SCARDHANDLE hCard,
    __in    DWORD dwControlCode,
    __in_bcount(cbInBufferSize) LPCVOID lpInBuffer,
    __in    DWORD cbInBufferSize,
    __out_bcount(cbOutBufferSize) LPVOID lpOutBuffer,
    __in    DWORD cbOutBufferSize,
    __out   LPDWORD lpBytesReturned);

extern WINSCARDAPI LONG WINAPI
SCardGetAttrib(
    __in    SCARDHANDLE hCard,
    __in    DWORD dwAttrId,
    __out_bcount_opt(*pcbAttrLen) LPBYTE pbAttr,
    __inout LPDWORD pcbAttrLen);
//
// NOTE:    The routine SCardGetAttrib's name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardGetReaderCapabilities(
//                  __in    SCARDHANDLE hCard,
//                  __in    DWORD dwTag,
//                  __out   LPBYTE pbAttr,
//                  __inout LPDWORD pcbAttrLen);
//
//          Here's a work-around MACRO:
#define SCardGetReaderCapabilities SCardGetAttrib

extern WINSCARDAPI LONG WINAPI
SCardSetAttrib(
    __in SCARDHANDLE hCard,
    __in DWORD dwAttrId,
    __in_bcount(cbAttrLen) LPCBYTE pbAttr,
    __in DWORD cbAttrLen);
//
// NOTE:    The routine SCardSetAttrib's name differs from the PC/SC definition.
//          It should be:
//
//              extern WINSCARDAPI LONG WINAPI
//              SCardSetReaderCapabilities(
//                  __in    SCARDHANDLE hCard,
//                  __in    DWORD dwTag,
//                  __in    LPCBYTE pbAttr,
//                  __in    DWORD cbAttrLen);
//
//          Here's a work-around MACRO:
#define SCardSetReaderCapabilities SCardSetAttrib


//
////////////////////////////////////////////////////////////////////////////////
//
//  Smart Card Dialog definitions
//
//      The following section contains structures and  exported function
//      declarations for the Smart Card Common Dialog dialog.
//

// Defined constants
// Flags
#define SC_DLG_MINIMAL_UI       0x01
#define SC_DLG_NO_UI            0x02
#define SC_DLG_FORCE_UI         0x04

#define SCERR_NOCARDNAME        0x4000
#define SCERR_NOGUIDS           0x8000

typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCA) (__in SCARDCONTEXT, __in LPSTR, __in LPSTR, __in PVOID);
typedef SCARDHANDLE (WINAPI *LPOCNCONNPROCW) (__in SCARDCONTEXT, __in LPWSTR, __in LPWSTR, __in PVOID);
#ifdef UNICODE
#define LPOCNCONNPROC  LPOCNCONNPROCW
#else
#define LPOCNCONNPROC  LPOCNCONNPROCA
#endif // !UNICODE
typedef BOOL (WINAPI *LPOCNCHKPROC) (__in SCARDCONTEXT, __in SCARDHANDLE, __in PVOID);
typedef void (WINAPI *LPOCNDSCPROC) (__in SCARDCONTEXT, __in SCARDHANDLE, __in PVOID);


//
// OPENCARD_SEARCH_CRITERIA: In order to specify a user-extended search,
// lpfnCheck must not be NULL.  Moreover, the connection to be made to the
// card before performing the callback must be indicated by either providing
// lpfnConnect and lpfnDisconnect OR by setting dwShareMode.
// If both the connection callbacks and dwShareMode are non-NULL, the callbacks
// will be used.
//

typedef struct {
    DWORD           dwStructSize;
    LPSTR           lpstrGroupNames;        // OPTIONAL reader groups to include in
    DWORD           nMaxGroupNames;         //          search.  NULL defaults to
                                            //          SCard$DefaultReaders
    LPCGUID         rgguidInterfaces;       // OPTIONAL requested interfaces
    DWORD           cguidInterfaces;        //          supported by card's SSP
    LPSTR           lpstrCardNames;         // OPTIONAL requested card names; all cards w/
    DWORD           nMaxCardNames;          //          matching ATRs will be accepted
    LPOCNCHKPROC    lpfnCheck;              // OPTIONAL if NULL no user check will be performed.
    LPOCNCONNPROCA  lpfnConnect;            // OPTIONAL if lpfnConnect is provided,
    LPOCNDSCPROC    lpfnDisconnect;         //          lpfnDisconnect must also be set.
    LPVOID          pvUserData;             // OPTIONAL parameter to callbacks
    DWORD           dwShareMode;            // OPTIONAL must be set if lpfnCheck is not null
    DWORD           dwPreferredProtocols;   // OPTIONAL
} OPENCARD_SEARCH_CRITERIAA, *POPENCARD_SEARCH_CRITERIAA, *LPOPENCARD_SEARCH_CRITERIAA;
typedef struct {
    DWORD           dwStructSize;
    LPWSTR          lpstrGroupNames;        // OPTIONAL reader groups to include in
    DWORD           nMaxGroupNames;         //          search.  NULL defaults to
                                            //          SCard$DefaultReaders
    LPCGUID         rgguidInterfaces;       // OPTIONAL requested interfaces
    DWORD           cguidInterfaces;        //          supported by card's SSP
    LPWSTR          lpstrCardNames;         // OPTIONAL requested card names; all cards w/
    DWORD           nMaxCardNames;          //          matching ATRs will be accepted
    LPOCNCHKPROC    lpfnCheck;              // OPTIONAL if NULL no user check will be performed.
    LPOCNCONNPROCW  lpfnConnect;            // OPTIONAL if lpfnConnect is provided,
    LPOCNDSCPROC    lpfnDisconnect;         //          lpfnDisconnect must also be set.
    LPVOID          pvUserData;             // OPTIONAL parameter to callbacks
    DWORD           dwShareMode;            // OPTIONAL must be set if lpfnCheck is not null
    DWORD           dwPreferredProtocols;   // OPTIONAL
} OPENCARD_SEARCH_CRITERIAW, *POPENCARD_SEARCH_CRITERIAW, *LPOPENCARD_SEARCH_CRITERIAW;
#ifdef UNICODE
typedef OPENCARD_SEARCH_CRITERIAW OPENCARD_SEARCH_CRITERIA;
typedef POPENCARD_SEARCH_CRITERIAW POPENCARD_SEARCH_CRITERIA;
typedef LPOPENCARD_SEARCH_CRITERIAW LPOPENCARD_SEARCH_CRITERIA;
#else
typedef OPENCARD_SEARCH_CRITERIAA OPENCARD_SEARCH_CRITERIA;
typedef POPENCARD_SEARCH_CRITERIAA POPENCARD_SEARCH_CRITERIA;
typedef LPOPENCARD_SEARCH_CRITERIAA LPOPENCARD_SEARCH_CRITERIA;
#endif // UNICODE


//
// OPENCARDNAME_EX: used by SCardUIDlgSelectCard; replaces obsolete OPENCARDNAME
//

typedef struct {
    DWORD           dwStructSize;           // REQUIRED
    SCARDCONTEXT    hSCardContext;          // REQUIRED
    HWND            hwndOwner;              // OPTIONAL
    DWORD           dwFlags;                // OPTIONAL -- default is SC_DLG_MINIMAL_UI
    LPCSTR          lpstrTitle;             // OPTIONAL
    LPCSTR          lpstrSearchDesc;        // OPTIONAL (eg. "Please insert your <brandname> smart card.")
    HICON           hIcon;                  // OPTIONAL 32x32 icon for your brand insignia
    POPENCARD_SEARCH_CRITERIAA pOpenCardSearchCriteria; // OPTIONAL
    LPOCNCONNPROCA  lpfnConnect;            // OPTIONAL - performed on successful selection
    LPVOID          pvUserData;             // OPTIONAL parameter to lpfnConnect
    DWORD           dwShareMode;            // OPTIONAL - if lpfnConnect is NULL, dwShareMode and
    DWORD           dwPreferredProtocols;   // OPTIONAL dwPreferredProtocols will be used to
                                            //          connect to the selected card
    LPSTR           lpstrRdr;               // REQUIRED [IN|OUT] Name of selected reader
    DWORD           nMaxRdr;                // REQUIRED [IN|OUT]
    LPSTR           lpstrCard;              // REQUIRED [IN|OUT] Name of selected card
    DWORD           nMaxCard;               // REQUIRED [IN|OUT]
    DWORD           dwActiveProtocol;       // [OUT] set only if dwShareMode not NULL
    SCARDHANDLE     hCardHandle;            // [OUT] set if a card connection was indicated
} OPENCARDNAME_EXA, *POPENCARDNAME_EXA, *LPOPENCARDNAME_EXA;
typedef struct {
    DWORD           dwStructSize;           // REQUIRED
    SCARDCONTEXT    hSCardContext;          // REQUIRED
    HWND            hwndOwner;              // OPTIONAL
    DWORD           dwFlags;                // OPTIONAL -- default is SC_DLG_MINIMAL_UI
    LPCWSTR         lpstrTitle;             // OPTIONAL
    LPCWSTR         lpstrSearchDesc;        // OPTIONAL (eg. "Please insert your <brandname> smart card.")
    HICON           hIcon;                  // OPTIONAL 32x32 icon for your brand insignia
    POPENCARD_SEARCH_CRITERIAW pOpenCardSearchCriteria; // OPTIONAL
    LPOCNCONNPROCW  lpfnConnect;            // OPTIONAL - performed on successful selection
    LPVOID          pvUserData;             // OPTIONAL parameter to lpfnConnect
    DWORD           dwShareMode;            // OPTIONAL - if lpfnConnect is NULL, dwShareMode and
    DWORD           dwPreferredProtocols;   // OPTIONAL dwPreferredProtocols will be used to
                                            //          connect to the selected card
    LPWSTR          lpstrRdr;               // REQUIRED [IN|OUT] Name of selected reader
    DWORD           nMaxRdr;                // REQUIRED [IN|OUT]
    LPWSTR          lpstrCard;              // REQUIRED [IN|OUT] Name of selected card
    DWORD           nMaxCard;               // REQUIRED [IN|OUT]
    DWORD           dwActiveProtocol;       // [OUT] set only if dwShareMode not NULL
    SCARDHANDLE     hCardHandle;            // [OUT] set if a card connection was indicated
} OPENCARDNAME_EXW, *POPENCARDNAME_EXW, *LPOPENCARDNAME_EXW;
#ifdef UNICODE
typedef OPENCARDNAME_EXW OPENCARDNAME_EX;
typedef POPENCARDNAME_EXW POPENCARDNAME_EX;
typedef LPOPENCARDNAME_EXW LPOPENCARDNAME_EX;
#else
typedef OPENCARDNAME_EXA OPENCARDNAME_EX;
typedef POPENCARDNAME_EXA POPENCARDNAME_EX;
typedef LPOPENCARDNAME_EXA LPOPENCARDNAME_EX;
#endif // UNICODE

#define OPENCARDNAMEA_EX OPENCARDNAME_EXA
#define OPENCARDNAMEW_EX OPENCARDNAME_EXW
#define POPENCARDNAMEA_EX POPENCARDNAME_EXA
#define POPENCARDNAMEW_EX POPENCARDNAME_EXW
#define LPOPENCARDNAMEA_EX LPOPENCARDNAME_EXA
#define LPOPENCARDNAMEW_EX LPOPENCARDNAME_EXW


//
// SCardUIDlgSelectCard replaces GetOpenCardName
//

extern WINSCARDAPI LONG WINAPI
SCardUIDlgSelectCardA(
    LPOPENCARDNAMEA_EX);
extern WINSCARDAPI LONG WINAPI
SCardUIDlgSelectCardW(
    LPOPENCARDNAMEW_EX);
#ifdef UNICODE
#define SCardUIDlgSelectCard  SCardUIDlgSelectCardW
#else
#define SCardUIDlgSelectCard  SCardUIDlgSelectCardA
#endif // !UNICODE


//
// "Smart Card Common Dialog" definitions for backwards compatibility
//  with the Smart Card Base Services SDK version 1.0
//

typedef struct {
    DWORD           dwStructSize;
    HWND            hwndOwner;
    SCARDCONTEXT    hSCardContext;
    LPSTR           lpstrGroupNames;
    DWORD           nMaxGroupNames;
    LPSTR           lpstrCardNames;
    DWORD           nMaxCardNames;
    LPCGUID         rgguidInterfaces;
    DWORD           cguidInterfaces;
    LPSTR           lpstrRdr;
    DWORD           nMaxRdr;
    LPSTR           lpstrCard;
    DWORD           nMaxCard;
    LPCSTR          lpstrTitle;
    DWORD           dwFlags;
    LPVOID          pvUserData;
    DWORD           dwShareMode;
    DWORD           dwPreferredProtocols;
    DWORD           dwActiveProtocol;
    LPOCNCONNPROCA  lpfnConnect;
    LPOCNCHKPROC    lpfnCheck;
    LPOCNDSCPROC    lpfnDisconnect;
    SCARDHANDLE     hCardHandle;
} OPENCARDNAMEA, *POPENCARDNAMEA, *LPOPENCARDNAMEA;
typedef struct {
    DWORD           dwStructSize;
    HWND            hwndOwner;
    SCARDCONTEXT    hSCardContext;
    LPWSTR          lpstrGroupNames;
    DWORD           nMaxGroupNames;
    LPWSTR          lpstrCardNames;
    DWORD           nMaxCardNames;
    LPCGUID         rgguidInterfaces;
    DWORD           cguidInterfaces;
    LPWSTR          lpstrRdr;
    DWORD           nMaxRdr;
    LPWSTR          lpstrCard;
    DWORD           nMaxCard;
    LPCWSTR         lpstrTitle;
    DWORD           dwFlags;
    LPVOID          pvUserData;
    DWORD           dwShareMode;
    DWORD           dwPreferredProtocols;
    DWORD           dwActiveProtocol;
    LPOCNCONNPROCW  lpfnConnect;
    LPOCNCHKPROC    lpfnCheck;
    LPOCNDSCPROC    lpfnDisconnect;
    SCARDHANDLE     hCardHandle;
} OPENCARDNAMEW, *POPENCARDNAMEW, *LPOPENCARDNAMEW;
#ifdef UNICODE
typedef OPENCARDNAMEW OPENCARDNAME;
typedef POPENCARDNAMEW POPENCARDNAME;
typedef LPOPENCARDNAMEW LPOPENCARDNAME;
#else
typedef OPENCARDNAMEA OPENCARDNAME;
typedef POPENCARDNAMEA POPENCARDNAME;
typedef LPOPENCARDNAMEA LPOPENCARDNAME;
#endif // UNICODE

// Backwards compatibility macros
#define OPENCARDNAME_A OPENCARDNAMEA
#define OPENCARDNAME_W OPENCARDNAMEW
#define POPENCARDNAME_A POPENCARDNAMEA
#define POPENCARDNAME_W POPENCARDNAMEW
#define LPOPENCARDNAME_A LPOPENCARDNAMEA
#define LPOPENCARDNAME_W LPOPENCARDNAMEW

extern WINSCARDAPI LONG WINAPI
GetOpenCardNameA(
    LPOPENCARDNAMEA);
extern WINSCARDAPI LONG WINAPI
GetOpenCardNameW(
    LPOPENCARDNAMEW);
#ifdef UNICODE
#define GetOpenCardName  GetOpenCardNameW
#else
#define GetOpenCardName  GetOpenCardNameA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardDlgExtendedError (void);

#if (NTDDI_VERSION >= NTDDI_VISTA)

//
// Smartcard Caching API
//

extern WINSCARDAPI LONG WINAPI
SCardReadCacheA(
    __in  SCARDCONTEXT hContext,
    __in  UUID *CardIdentifier,
    __in  DWORD FreshnessCounter,
    __in  LPSTR LookupName,
    __out_bcount(*DataLen) PBYTE Data,
    __out DWORD *DataLen);
extern WINSCARDAPI LONG WINAPI
SCardReadCacheW(
    __in  SCARDCONTEXT hContext,
    __in  UUID *CardIdentifier,
    __in  DWORD FreshnessCounter,
    __in  LPWSTR LookupName,
    __out_bcount(*DataLen) PBYTE Data,
    __out DWORD *DataLen);
#ifdef UNICODE
#define SCardReadCache  SCardReadCacheW
#else
#define SCardReadCache  SCardReadCacheA
#endif // !UNICODE

extern WINSCARDAPI LONG WINAPI
SCardWriteCacheA(
    __in SCARDCONTEXT hContext,
    __in UUID *CardIdentifier,
    __in DWORD FreshnessCounter,
    __in LPSTR LookupName,
    __in_bcount(DataLen) PBYTE Data,
    __in DWORD DataLen);
extern WINSCARDAPI LONG WINAPI
SCardWriteCacheW(
    __in SCARDCONTEXT hContext,
    __in UUID *CardIdentifier,
    __in DWORD FreshnessCounter,
    __in LPWSTR LookupName,
    __in_bcount(DataLen) PBYTE Data,
    __in DWORD DataLen);
#ifdef UNICODE
#define SCardWriteCache  SCardWriteCacheW
#else
#define SCardWriteCache  SCardWriteCacheA
#endif // !UNICODE

#endif // (NTDDI_VERSION >= NTDDI_VISTA)

#ifdef __cplusplus
}
#endif
#endif // _WINSCARD_H_

/*++

Copyright (c) 1996  Microsoft Corporation

Module Name:

    winsmcrd.h

Abstract:
    Smart Card class/port IOCTL codes. This file is required for all code
    user mode and kernel mode, using Smart Card IOCTL's, defines,
    data structures

Revision History:

--*/


#ifndef _NTDDSCRD_H2_
#define _NTDDSCRD_H2_

#if defined (_MSC_VER) && (_MSC_VER >= 1020)
#pragma once
#endif

#ifdef __cplusplus
extern "C" {
#endif

#ifdef _WINSCARD_H_
typedef DWORD ULONG;
typedef WORD UWORD;
typedef BYTE UCHAR;
#else
typedef ULONG DWORD;
// typedef UWORD WORD;
typedef UCHAR BYTE;
#endif

#ifndef DEVICE_TYPE_SMARTCARD
#define FILE_DEVICE_SMARTCARD           0x00000031
#else
#if 0x00000031 != FILE_DEVICE_SMARTCARD
#error "Incorrect Smart Card Device Definition"
#endif
#endif


//
// Various constants
//

#define SCARD_ATR_LENGTH 33  // ISO 7816-3 spec.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Protocol Flag definitions
//

#define SCARD_PROTOCOL_UNDEFINED    0x00000000  // There is no active protocol.
#define SCARD_PROTOCOL_T0           0x00000001  // T=0 is the active protocol.
#define SCARD_PROTOCOL_T1           0x00000002  // T=1 is the active protocol.
#define SCARD_PROTOCOL_RAW          0x00010000  // Raw is the active protocol.
//
// This is the mask of ISO defined transmission protocols
//
#define SCARD_PROTOCOL_Tx           (SCARD_PROTOCOL_T0 | SCARD_PROTOCOL_T1)
//
// Use the default transmission parameters / card clock freq.
//
#define SCARD_PROTOCOL_DEFAULT      0x80000000
//
// Use optimal transmission parameters / card clock freq.
// Since using the optimal parameters is the default case no bit is defined to be 1
//
#define SCARD_PROTOCOL_OPTIMAL      0x00000000


//
// Ioctl parameters 1 for IOCTL_SMARTCARD_POWER
//
#define SCARD_POWER_DOWN 0          // Power down the card.
#define SCARD_COLD_RESET 1          // Cycle power and reset the card.
#define SCARD_WARM_RESET 2          // Force a reset on the card.

//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader Action IOCTLs
//

#define SCARD_CTL_CODE(code)        CTL_CODE(FILE_DEVICE_SMARTCARD, \
                                            (code), \
                                            METHOD_BUFFERED, \
                                            FILE_ANY_ACCESS)

#define IOCTL_SMARTCARD_POWER           SCARD_CTL_CODE( 1)
#define IOCTL_SMARTCARD_GET_ATTRIBUTE   SCARD_CTL_CODE( 2)
#define IOCTL_SMARTCARD_SET_ATTRIBUTE   SCARD_CTL_CODE( 3)
#define IOCTL_SMARTCARD_CONFISCATE      SCARD_CTL_CODE( 4)
#define IOCTL_SMARTCARD_TRANSMIT        SCARD_CTL_CODE( 5)
#define IOCTL_SMARTCARD_EJECT           SCARD_CTL_CODE( 6)
#define IOCTL_SMARTCARD_SWALLOW         SCARD_CTL_CODE( 7)
// #define IOCTL_SMARTCARD_READ            SCARD_CTL_CODE( 8) obsolete
// #define IOCTL_SMARTCARD_WRITE           SCARD_CTL_CODE( 9) obsolete
#define IOCTL_SMARTCARD_IS_PRESENT      SCARD_CTL_CODE(10)
#define IOCTL_SMARTCARD_IS_ABSENT       SCARD_CTL_CODE(11)
#define IOCTL_SMARTCARD_SET_PROTOCOL    SCARD_CTL_CODE(12)
#define IOCTL_SMARTCARD_GET_STATE       SCARD_CTL_CODE(14)
#define IOCTL_SMARTCARD_GET_LAST_ERROR  SCARD_CTL_CODE(15)
#define IOCTL_SMARTCARD_GET_PERF_CNTR   SCARD_CTL_CODE(16)


//
///////////////////////////////////////////////////////////////////////////////
//
// Tags for requesting card and reader attributes
//

#define MAXIMUM_ATTR_STRING_LENGTH 32   // Nothing bigger than this from getAttr
#define MAXIMUM_SMARTCARD_READERS  10   // Limit the readers on the system

#define SCARD_ATTR_VALUE(Class, Tag) ((((ULONG)(Class)) << 16) | ((ULONG)(Tag)))

#define SCARD_CLASS_VENDOR_INFO     1   // Vendor information definitions
#define SCARD_CLASS_COMMUNICATIONS  2   // Communication definitions
#define SCARD_CLASS_PROTOCOL        3   // Protocol definitions
#define SCARD_CLASS_POWER_MGMT      4   // Power Management definitions
#define SCARD_CLASS_SECURITY        5   // Security Assurance definitions
#define SCARD_CLASS_MECHANICAL      6   // Mechanical characteristic definitions
#define SCARD_CLASS_VENDOR_DEFINED  7   // Vendor specific definitions
#define SCARD_CLASS_IFD_PROTOCOL    8   // Interface Device Protocol options
#define SCARD_CLASS_ICC_STATE       9   // ICC State specific definitions
#define SCARD_CLASS_PERF       0x7ffe   // performace counters
#define SCARD_CLASS_SYSTEM     0x7fff   // System-specific definitions

#define SCARD_ATTR_VENDOR_NAME SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0100)
#define SCARD_ATTR_VENDOR_IFD_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0101)
#define SCARD_ATTR_VENDOR_IFD_VERSION SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0102)
#define SCARD_ATTR_VENDOR_IFD_SERIAL_NO SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_INFO, 0x0103)
#define SCARD_ATTR_CHANNEL_ID SCARD_ATTR_VALUE(SCARD_CLASS_COMMUNICATIONS, 0x0110)
#define SCARD_ATTR_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
// #define SCARD_ATTR_ASYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0120)
#define SCARD_ATTR_DEFAULT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0121)
#define SCARD_ATTR_MAX_CLK SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0122)
#define SCARD_ATTR_DEFAULT_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0123)
#define SCARD_ATTR_MAX_DATA_RATE SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0124)
#define SCARD_ATTR_MAX_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0125)
// #define SCARD_ATTR_SYNC_PROTOCOL_TYPES SCARD_ATTR_VALUE(SCARD_CLASS_PROTOCOL, 0x0126)
#define SCARD_ATTR_POWER_MGMT_SUPPORT SCARD_ATTR_VALUE(SCARD_CLASS_POWER_MGMT, 0x0131)
#define SCARD_ATTR_USER_TO_CARD_AUTH_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0140)
#define SCARD_ATTR_USER_AUTH_INPUT_DEVICE SCARD_ATTR_VALUE(SCARD_CLASS_SECURITY, 0x0142)
#define SCARD_ATTR_CHARACTERISTICS SCARD_ATTR_VALUE(SCARD_CLASS_MECHANICAL, 0x0150)

#define SCARD_ATTR_CURRENT_PROTOCOL_TYPE SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0201)
#define SCARD_ATTR_CURRENT_CLK SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0202)
#define SCARD_ATTR_CURRENT_F SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0203)
#define SCARD_ATTR_CURRENT_D SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0204)
#define SCARD_ATTR_CURRENT_N SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0205)
#define SCARD_ATTR_CURRENT_W SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0206)
#define SCARD_ATTR_CURRENT_IFSC SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0207)
#define SCARD_ATTR_CURRENT_IFSD SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0208)
#define SCARD_ATTR_CURRENT_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x0209)
#define SCARD_ATTR_CURRENT_CWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020a)
#define SCARD_ATTR_CURRENT_EBC_ENCODING SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020b)
#define SCARD_ATTR_EXTENDED_BWT SCARD_ATTR_VALUE(SCARD_CLASS_IFD_PROTOCOL, 0x020c)

#define SCARD_ATTR_ICC_PRESENCE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0300)
#define SCARD_ATTR_ICC_INTERFACE_STATUS SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0301)
#define SCARD_ATTR_CURRENT_IO_STATE SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0302)
#define SCARD_ATTR_ATR_STRING SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0303)
#define SCARD_ATTR_ICC_TYPE_PER_ATR SCARD_ATTR_VALUE(SCARD_CLASS_ICC_STATE, 0x0304)

#define SCARD_ATTR_ESC_RESET SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA000)
#define SCARD_ATTR_ESC_CANCEL SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA003)
#define SCARD_ATTR_ESC_AUTHREQUEST SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA005)
#define SCARD_ATTR_MAXINPUT SCARD_ATTR_VALUE(SCARD_CLASS_VENDOR_DEFINED, 0xA007)

#define SCARD_ATTR_DEVICE_UNIT SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0001)
#define SCARD_ATTR_DEVICE_IN_USE SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0002)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0003)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_A SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0004)
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0005)
#define SCARD_ATTR_DEVICE_SYSTEM_NAME_W SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0006)
#define SCARD_ATTR_SUPRESS_T1_IFS_REQUEST SCARD_ATTR_VALUE(SCARD_CLASS_SYSTEM, 0x0007)

#define SCARD_PERF_NUM_TRANSMISSIONS SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0001)
#define SCARD_PERF_BYTES_TRANSMITTED SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0002)
#define SCARD_PERF_TRANSMISSION_TIME SCARD_ATTR_VALUE(SCARD_CLASS_PERF, 0x0003)

#ifdef UNICODE
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_W
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_W
#else
#define SCARD_ATTR_DEVICE_FRIENDLY_NAME SCARD_ATTR_DEVICE_FRIENDLY_NAME_A
#define SCARD_ATTR_DEVICE_SYSTEM_NAME SCARD_ATTR_DEVICE_SYSTEM_NAME_A
#endif


//
// T=0 Protocol Defines
//

#define SCARD_T0_HEADER_LENGTH 7
#define SCARD_T0_CMD_LENGTH 5


//
// T=1 Protocol Defines
//

#define SCARD_T1_PROLOGUE_LENGTH 3
#define SCARD_T1_EPILOGUE_LENGTH 2
#define SCARD_T1_MAX_IFS 254


//
///////////////////////////////////////////////////////////////////////////////
//
//  Reader states
//

#define SCARD_UNKNOWN     0   // This value implies the driver is unaware
                              // of the current state of the reader.
#define SCARD_ABSENT      1   // This value implies there is no card in
                              // the reader.
#define SCARD_PRESENT     2   // This value implies there is a card is
                              // present in the reader, but that it has
                              // not been moved into position for use.
#define SCARD_SWALLOWED   3   // This value implies there is a card in the
                              // reader in position for use.  The card is
                              // not powered.
#define SCARD_POWERED     4   // This value implies there is power is
                              // being provided to the card, but the
                              // Reader Driver is unaware of the mode of
                              // the card.
#define SCARD_NEGOTIABLE  5   // This value implies the card has been
                              // reset and is awaiting PTS negotiation.
#define SCARD_SPECIFIC    6   // This value implies the card has been
                              // reset and specific communication
                              // protocols have been established.

////////////////////////////////////////////////////////////////////////////////
//
//  I/O Services
//
//      The following services provide access to the I/O capabilities of the
//      reader drivers.  Services of the Smart Card are requested by placing the
//      following structure into the protocol buffer:
//


typedef struct _SCARD_IO_REQUEST{
    DWORD dwProtocol;   // Protocol identifier
    DWORD cbPciLength;  // Protocol Control Information Length
} SCARD_IO_REQUEST, *PSCARD_IO_REQUEST, *LPSCARD_IO_REQUEST;
typedef const SCARD_IO_REQUEST *LPCSCARD_IO_REQUEST;


//
// T=0 protocol services.
//

typedef struct {
    BYTE
        bCla,   // The instruction class
        bIns,   // The instruction code within the instruction class
        bP1,
        bP2,    // Parameters to the instruction
        bP3;    // Size of I/O Transfer
} SCARD_T0_COMMAND, *LPSCARD_T0_COMMAND;

typedef struct {
    SCARD_IO_REQUEST ioRequest;
    BYTE
        bSw1,
        bSw2;           // Return codes from the instruction
    union
    {
        SCARD_T0_COMMAND CmdBytes;
        BYTE rgbHeader[5];
    } DUMMYUNIONNAME;
} SCARD_T0_REQUEST;

typedef SCARD_T0_REQUEST *PSCARD_T0_REQUEST, *LPSCARD_T0_REQUEST;


//
//  T=1 Protocol Services
//

typedef struct {
    SCARD_IO_REQUEST ioRequest;
} SCARD_T1_REQUEST;
typedef SCARD_T1_REQUEST *PSCARD_T1_REQUEST, *LPSCARD_T1_REQUEST;


//
////////////////////////////////////////////////////////////////////////////////
//
//  Driver attribute flags
//

#define SCARD_READER_SWALLOWS       0x00000001  // Reader has a card swallowing
                                                // mechanism.
#define SCARD_READER_EJECTS         0x00000002  // Reader has a card ejection
                                                // mechanism.
#define SCARD_READER_CONFISCATES    0x00000004  // Reader has a card capture
                                                // mechanism.

//
///////////////////////////////////////////////////////////////////////////////
//
// Type of reader
//
#define SCARD_READER_TYPE_SERIAL    0x01
#define SCARD_READER_TYPE_PARALELL  0x02
#define SCARD_READER_TYPE_KEYBOARD  0x04
#define SCARD_READER_TYPE_SCSI      0x08
#define SCARD_READER_TYPE_IDE       0x10
#define SCARD_READER_TYPE_USB       0x20
#define SCARD_READER_TYPE_PCMCIA    0x40
#define SCARD_READER_TYPE_VENDOR    0xF0

#ifdef __cplusplus
}
#endif
#endif

#ifdef Z_U4
   typedef Z_U4 z_crc_t;
#else
   typedef unsigned long z_crc_t;
#endif

#ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
#  define Z_HAVE_UNISTD_H
#endif

#if 1    /* was set to #if 1 by ./configure */
#  define Z_HAVE_STDARG_H
#endif

#    include <zlib.h>
#  endif
#else
#  ifdef HAVE_LIBZ
#    undef HAVE_LIBZ
#  endif
#endif




#define CK_PTR *
#define CK_DEFINE_FUNCTION(returnType, name) returnType name
#define CK_DECLARE_FUNCTION(returnType, name) returnType name
#define CK_DECLARE_FUNCTION_POINTER(returnType, name) returnType (* name)
#define CK_CALLBACK_FUNCTION(returnType, name) returnType (* name)
#ifndef NULL_PTR

#define MAX_ATR_SIZE 1024
#endif

#ifdef CACKEY_DEBUG
#  ifdef HAVE_TIME_H
#    include <time.h>
static time_t cackey_debug_start_time = 0;
#    define CACKEY_DEBUG_PRINTTIME { if (cackey_debug_start_time == 0) { cackey_debug_start_time = time(NULL); }; fprintf(stderr, "[%lu]: ", (unsigned long) (time(NULL) - cackey_debug_start_time)); }
#  else
#    define CACKEY_DEBUG_PRINTTIME /**/
#  endif

#  define CACKEY_DEBUG_PRINTF(x...) { CACKEY_DEBUG_PRINTTIME; fprintf(stderr, "%s():%i: ", __func__, __LINE__); fprintf(stderr, x); fprintf(stderr, "\n"); fflush(stderr); }
#  define CACKEY_DEBUG_PRINTBUF(f, x, y) { unsigned char *TMPBUF; unsigned long idx; TMPBUF = (unsigned char *) (x); CACKEY_DEBUG_PRINTTIME; fprintf(stderr, "%s():%i: %s  (%s/%lu = {%02x", __func__, __LINE__, f, #x, (unsigned long) (y), TMPBUF[0]); for (idx = 1; idx < (y); idx++) { fprintf(stderr, ", %02x", TMPBUF[idx]); }; fprintf(stderr, "})\n"); fflush(stderr); }
#  define CACKEY_DEBUG_PERROR(x) { fprintf(stderr, "%s():%i: ", __func__, __LINE__); CACKEY_DEBUG_PRINTTIME; perror(x); fflush(stderr); }
#  define free(x) { CACKEY_DEBUG_PRINTF("FREE(%p) (%s)", x, #x); free(x); }














































static void *CACKEY_DEBUG_FUNC_MALLOC(size_t size, const char *func, int line) {
	void *retval;

	retval = malloc(size);

	CACKEY_DEBUG_PRINTTIME;
	fprintf(stderr, "%s():%i: ", func, line);
	fprintf(stderr, "MALLOC() = %p", retval);
	fprintf(stderr, "\n");
	fflush(stderr);

	return(retval);
}

static void *CACKEY_DEBUG_FUNC_REALLOC(void *ptr, size_t size, const char *func, int line) {
	void *retval;

	retval = realloc(ptr, size);

	if (retval != ptr) {
		CACKEY_DEBUG_PRINTTIME;
		fprintf(stderr, "%s():%i: ", func, line);
		fprintf(stderr, "REALLOC(%p) = %p", ptr, retval);
		fprintf(stderr, "\n");
		fflush(stderr);
	}

	if (retval == NULL) {
		CACKEY_DEBUG_PRINTF(" *** ERROR *** realloc returned NULL (size = %lu)", (unsigned long) size);
	}

	return(retval);
}

static char *CACKEY_DEBUG_FUNC_STRDUP(const char *ptr, const char *func, int line) {
	char *retval;

	retval = strdup(ptr);

	CACKEY_DEBUG_PRINTTIME;
	fprintf(stderr, "%s():%i: ", func, line);
	fprintf(stderr, "STRDUP_MALLOC() = %p", retval);
	fprintf(stderr, "\n");
	fflush(stderr);

	return(retval);
}

static const char *CACKEY_DEBUG_FUNC_TAG_TO_STR(unsigned char tag) {
	switch (tag) {
		case GSCIS_TAG_CARDID:

	CK_VOID_PTR decrypt_mech_parm;
	CK_ULONG decrypt_mech_parmlen;
	struct cackey_identity *decrypt_identity;
};

struct cackey_slot {
	int active;


	char *pcsc_reader;

	int pcsc_card_connected;
	SCARDHANDLE pcsc_card;

	int transaction_depth;
	int transaction_need_hw_lock;

	int slot_reset;

	CK_FLAGS token_flags;

	unsigned char *label;

	DWORD protocol;



};

typedef enum {
	CACKEY_TLV_APP_GENERIC = 0x01,
	CACKEY_TLV_APP_SKI     = 0x02,
	CACKEY_TLV_APP_PKI     = 0x04
} cackey_tlv_apptype;

 */
static void cackey_slots_disconnect_all(void) {
	uint32_t idx;

	CACKEY_DEBUG_PRINTF("Called.");

	for (idx = 0; idx < (sizeof(cackey_slots) / sizeof(cackey_slots[0])); idx++) {





		if (cackey_slots[idx].pcsc_card_connected) {
			CACKEY_DEBUG_PRINTF("SCardDisconnect(%lu) called", (unsigned long) idx);

			SCardDisconnect(cackey_slots[idx].pcsc_card, SCARD_LEAVE_CARD);
		}

		if (cackey_slots[idx].label) {

	if (free_start) {
		free(start);
	}

	return;
}

























/*
 * SYNPOSIS
 *     ...
 *
 * ARGUMENTS
 *     ...
 *

		if (*count == 0) {
			CACKEY_DEBUG_PRINTF("Requested we return 0 objects, short-circuit");

			return(certs);
		}
	}

























	/* Begin a SmartCard transaction */
	transaction_ret = cackey_begin_transaction(slot);
	if (transaction_ret != CACKEY_PCSC_S_OK) {
		CACKEY_DEBUG_PRINTF("Unable begin transaction, returning in failure");

		return(NULL);
	}

	*count = outidx;

	if (certs_resizable) {
		certs = realloc(certs, sizeof(*certs) * (*count));
	}




	/* Terminate SmartCard Transaction */
	cackey_end_transaction(slot);

	return(certs);
}

/*

				return(CACKEY_PCSC_E_NEEDLOGIN);
			}

			if (send_ret == CACKEY_PCSC_E_TOKENABSENT) {
				CACKEY_DEBUG_PRINTF("Token absent.  Returning TOKENABSENT");

				cackey_mark_slot_reset(slot);
				slot->token_flags = CKF_LOGIN_REQUIRED;

				return(CACKEY_PCSC_E_TOKENABSENT);
			}

			return(-1);
		}

 *
 * NOTES
 *     ...
 *
 */
static cackey_ret cackey_token_present(struct cackey_slot *slot) {
	cackey_ret pcsc_connect_ret;
	DWORD reader_len, state, protocol, atr_len;
	BYTE atr[MAX_ATR_SIZE];
	LONG status_ret, scard_reconn_ret;

	CACKEY_DEBUG_PRINTF("Called.");







	pcsc_connect_ret = cackey_connect_card(slot);
	if (pcsc_connect_ret != CACKEY_PCSC_S_OK) {
		CACKEY_DEBUG_PRINTF("Unable to connect to card, returning token absent");

		return(CACKEY_PCSC_E_TOKENABSENT);
	}

 *
 * NOTES
 *     ...
 *
 */
static ssize_t cackey_pcsc_identity_to_label(struct cackey_pcsc_identity *identity, unsigned char *label_buf, unsigned long label_buf_len) {
	unsigned long certificate_len;
	char *label_asn1;
	void *certificate;
	int x509_read_ret;

	certificate = identity->certificate;
	certificate_len = identity->certificate_len;

	if (certificate_len < 0) {

		free(retval);

		retval = NULL;
	}

	*pulCount = numattrs;

	CACKEY_DEBUG_PRINTF("Returning %lu objects (%p).", numattrs, retval);

	return(retval);
}

static void cackey_free_identities(struct cackey_identity *identities, unsigned long identities_count) {
	CK_ATTRIBUTE *curr_attr;
	unsigned long id_idx, attr_idx;

			cackey_free_certs(identities[id_idx].pcsc_identity, 1, 1);
		}
	}

	free(identities);
}

























static struct cackey_identity *cackey_read_identities(struct cackey_slot *slot, unsigned long *ids_found) {
	struct cackey_pcsc_identity *pcsc_identities;
	struct cackey_identity *identities;
	unsigned long num_ids, id_idx, curr_id_type;
	unsigned long num_certs, num_extra_certs, cert_idx;
	int include_extra_certs = 1;

	CACKEY_DEBUG_PRINTF("Called.");

	if (getenv("CACKEY_NO_EXTRA_CERTS") != NULL) {
		CACKEY_DEBUG_PRINTF("Asked not to include extra (DoD) certificates");

		include_extra_certs = 0;
	}

	if (include_extra_certs) {
		num_extra_certs = sizeof(extra_certs) / sizeof(extra_certs[0]);

		CACKEY_DEBUG_PRINTF("Including %i DoD Certificates as objects on this token", num_extra_certs);
	} else {
		num_extra_certs = 0;
	}

	if (ids_found == NULL) {
		CACKEY_DEBUG_PRINTF("Error.  ids_found is NULL");

		return(NULL);
	}



































	pcsc_identities = cackey_read_certs(slot, NULL, &num_certs);
	if (pcsc_identities != NULL) {
		/* Convert number of Certs to number of objects */
		num_ids = (CKO_PRIVATE_KEY - CKO_CERTIFICATE + 1) * num_certs;

		num_ids += num_extra_certs * 3;



		identities = malloc(num_ids * sizeof(*identities));

		/* Add certificates, public keys, and private keys from the smartcard */
		id_idx = 0;
		for (cert_idx = 0; cert_idx < num_certs; cert_idx++) {
			for (curr_id_type = CKO_CERTIFICATE; curr_id_type <= CKO_PRIVATE_KEY; curr_id_type++) {
				identities[id_idx].attributes = cackey_get_attributes(curr_id_type, &pcsc_identities[cert_idx], cert_idx, &identities[id_idx].attributes_count);

				identities[id_idx].pcsc_identity = malloc(sizeof(*identities[id_idx].pcsc_identity));
				memcpy(identities[id_idx].pcsc_identity, &pcsc_identities[cert_idx], sizeof(*identities[id_idx].pcsc_identity));

				identities[id_idx].pcsc_identity->certificate = malloc(pcsc_identities[cert_idx].certificate_len);
				memcpy(identities[id_idx].pcsc_identity->certificate, pcsc_identities[cert_idx].certificate, pcsc_identities[cert_idx].certificate_len);

				id_idx++;
			}
		}

		cackey_free_certs(pcsc_identities, num_certs, 1);

		/* Add DoD Certificates and Netscape Trust Objects */
		for (cert_idx = 0; cert_idx < num_extra_certs; cert_idx++) {
			identities[id_idx].pcsc_identity = NULL;
			identities[id_idx].attributes = cackey_get_attributes(CKO_CERTIFICATE, &extra_certs[cert_idx], 0xf000 | cert_idx, &identities[id_idx].attributes_count);
			id_idx++;

			identities[id_idx].pcsc_identity = NULL;
			identities[id_idx].attributes = cackey_get_attributes(CKO_PUBLIC_KEY, &extra_certs[cert_idx], 0xf000 | cert_idx, &identities[id_idx].attributes_count);
			id_idx++;

			identities[id_idx].pcsc_identity = NULL;
			identities[id_idx].attributes = cackey_get_attributes(CKO_NETSCAPE_TRUST, &extra_certs[cert_idx], 0xf000 | cert_idx, &identities[id_idx].attributes_count);
			id_idx++;
		}


		*ids_found = num_ids;

		return(identities);
	}


	*ids_found = 0;
	return(NULL);
}

CK_DEFINE_FUNCTION(CK_RV, C_Initialize)(CK_VOID_PTR pInitArgs) {
	CK_C_INITIALIZE_ARGS CK_PTR args;
	uint32_t idx;
	int mutex_init_ret;

	CACKEY_DEBUG_PRINTF("Called.");

	if (cackey_initialized) {
		CACKEY_DEBUG_PRINTF("Error.  Already initialized.");

		cackey_slots[idx].active = 0;
		cackey_slots[idx].pcsc_reader = NULL;
		cackey_slots[idx].transaction_depth = 0;
		cackey_slots[idx].transaction_need_hw_lock = 0;
		cackey_slots[idx].slot_reset = 0;
		cackey_slots[idx].token_flags = 0;
		cackey_slots[idx].label = NULL;















	}

	cackey_initialized = 1;

	if (!cackey_biglock_init) {
		mutex_init_ret = cackey_mutex_create(&cackey_biglock);

			C_CloseSession(idx);
		}
	}

	cackey_slots_disconnect_all();

	for (idx = 0; idx < (sizeof(cackey_slots) / sizeof(cackey_slots[0])); idx++) {




		if (cackey_slots[idx].pcsc_reader) {
			free(cackey_slots[idx].pcsc_reader);
		}






	}

	cackey_pcsc_disconnect();

	cackey_initialized = 0;

	CACKEY_DEBUG_PRINTF("Returning CKR_OK (%i)", CKR_OK);

	return(CKR_OK);
}

/*
 * Process list of readers, and create mapping between reader name and slot ID
 */
CK_DEFINE_FUNCTION(CK_RV, C_GetSlotList)(CK_BBOOL tokenPresent, CK_SLOT_ID_PTR pSlotList, CK_ULONG_PTR pulCount) {

	int mutex_retval;
	int pcsc_connect_ret;
	CK_ULONG count, slot_count = 0, currslot;
	char *pcsc_readers, *pcsc_readers_s, *pcsc_readers_e;
	DWORD pcsc_readers_len;
	LONG scard_listreaders_ret;
	size_t curr_reader_len;


	CACKEY_DEBUG_PRINTF("Called.");

	if (pulCount == NULL) {
		CACKEY_DEBUG_PRINTF("Error. pulCount is NULL.");

		return(CKR_ARGUMENTS_BAD);

	if (mutex_retval != 0) {
		CACKEY_DEBUG_PRINTF("Error.  Locking failed.");

		return(CKR_GENERAL_ERROR);
	}

	/* Clear list of slots */

	if (pSlotList) {
























		CACKEY_DEBUG_PRINTF("Purging all slot information.");

		/* Only update the list of slots if we are actually being supply the slot information */
		cackey_slots_disconnect_all();

		for (currslot = 0; currslot < (sizeof(cackey_slots) / sizeof(cackey_slots[0])); currslot++) {




			if (cackey_slots[currslot].pcsc_reader) {
				free(cackey_slots[currslot].pcsc_reader);

				cackey_slots[currslot].pcsc_reader = NULL;
			}

			if (cackey_slots[currslot].label) {
				free(cackey_slots[currslot].label);

				cackey_slots[currslot].label = NULL;
			}

			cackey_slots[currslot].active = 0;



		}
	}

	/* Determine list of readers */
	pcsc_connect_ret = cackey_pcsc_connect();
	if (pcsc_connect_ret != CACKEY_PCSC_S_OK) {
		CACKEY_DEBUG_PRINTF("Connection to PC/SC failed, assuming no slots");

			scard_listreaders_ret = SCardListReaders(*cackey_pcsc_handle, NULL, pcsc_readers, &pcsc_readers_len);
			if (scard_listreaders_ret == SCARD_S_SUCCESS) {
				pcsc_readers_e = pcsc_readers + pcsc_readers_len;

				/* Start with Slot ID 1, to avoid a bug in GDM on RHEL */
				/* Bug 594911: https://bugzilla.redhat.com/show_bug.cgi?id=594911 */
				currslot = 1;

				while (pcsc_readers < pcsc_readers_e) {







					curr_reader_len = strlen(pcsc_readers);

					if ((pcsc_readers + curr_reader_len) > pcsc_readers_e) {
						break;
					}

					if (curr_reader_len == 0) {
						break;
					}

					if (currslot >= (sizeof(cackey_slots) / sizeof(cackey_slots[0]))) {
						CACKEY_DEBUG_PRINTF("Found more readers than slots are available!");

						break;
					}

					CACKEY_DEBUG_PRINTF("Found reader: %s", pcsc_readers);

					/* Only update the list of slots if we are actually being asked supply the slot information */
					if (pSlotList) {

						cackey_slots[currslot].active = 1;

						cackey_slots[currslot].pcsc_reader = strdup(pcsc_readers);
						cackey_slots[currslot].pcsc_card_connected = 0;
						cackey_slots[currslot].transaction_depth = 0;
						cackey_slots[currslot].transaction_need_hw_lock = 0;
						cackey_slots[currslot].slot_reset = 1;
						cackey_slots[currslot].token_flags = CKF_LOGIN_REQUIRED;
						cackey_slots[currslot].label = NULL;

						cackey_mark_slot_reset(&cackey_slots[currslot]);




					}
					currslot++;

					pcsc_readers += curr_reader_len + 1;
				}

				/* Start with Slot ID 1, to avoid a bug in GDM on RHEL */
				/* Bug 594911: https://bugzilla.redhat.com/show_bug.cgi?id=594911 */
				if (currslot > 1) {

					/* Start with Slot ID 1, to avoid a bug in GDM on RHEL */
					/* Bug 594911: https://bugzilla.redhat.com/show_bug.cgi?id=594911 */
					slot_count = currslot - 1;

				}
			} else {
				CACKEY_DEBUG_PRINTF("Second call to SCardListReaders failed, return %s/%li", CACKEY_DEBUG_FUNC_SCARDERR_TO_STR(scard_listreaders_ret), (long) scard_listreaders_ret);
			}

			free(pcsc_readers_s);
		} else {

		return(CKR_OK);
	}

	count = *pulCount;
	if (count < slot_count) {
		CACKEY_DEBUG_PRINTF("Error. User allocated %lu entries, but we have %lu entries.", count, slot_count);



		return(CKR_BUFFER_TOO_SMALL);	
	}




	for (currslot = 0; currslot < slot_count; currslot++) {


		/* Start with Slot ID 1, to avoid a bug in GDM on RHEL */





		/* Bug 594911: https://bugzilla.redhat.com/show_bug.cgi?id=594911 */






		pSlotList[currslot] = currslot + 1;








	}

	*pulCount = slot_count;

	CACKEY_DEBUG_PRINTF("Returning CKR_OK (%i).  Found %lu readers.", CKR_OK, (unsigned long) slot_count);

	return(CKR_OK);

		CACKEY_DEBUG_PRINTF("Error. Invalid slot requested (%lu), slot not currently active", slotID);

		cackey_mutex_unlock(cackey_biglock);

		return(CKR_SLOT_ID_INVALID);
	}

	pInfo->flags = CKF_REMOVABLE_DEVICE | CKF_HW_SLOT;





	if (cackey_token_present(&cackey_slots[slotID]) == CACKEY_PCSC_S_TOKENPRESENT) {
		pInfo->flags |= CKF_TOKEN_PRESENT;
	}

	bytes_to_copy = strlen(cackey_slots[slotID].pcsc_reader);
	if (sizeof(pInfo->manufacturerID) < bytes_to_copy) {

CK_DEFINE_FUNCTION(CK_RV, C_FindObjects)(CK_SESSION_HANDLE hSession, CK_OBJECT_HANDLE_PTR phObject, CK_ULONG ulMaxObjectCount, CK_ULONG_PTR pulObjectCount) {
	struct cackey_identity *curr_id;
	CK_ATTRIBUTE *curr_attr;
	CK_ULONG curr_id_idx, curr_out_id_idx, curr_attr_idx, sess_attr_idx;
	CK_ULONG matched_count, prev_matched_count;
	int mutex_retval;





	CACKEY_DEBUG_PRINTF("Called.");

	if (!cackey_initialized) {
		CACKEY_DEBUG_PRINTF("Error.  Not initialized.");

		return(CKR_CRYPTOKI_NOT_INITIALIZED);

		cackey_mutex_unlock(cackey_biglock);

		CACKEY_DEBUG_PRINTF("Error.  Search not active.");
		
		return(CKR_OPERATION_NOT_INITIALIZED);
	}





	curr_out_id_idx = 0;
	for (curr_id_idx = cackey_sessions[hSession].search_curr_id; curr_id_idx < cackey_sessions[hSession].identities_count && ulMaxObjectCount; curr_id_idx++) {
		curr_id = &cackey_sessions[hSession].identities[curr_id_idx];

		CACKEY_DEBUG_PRINTF("Processing identity:%lu", (unsigned long) curr_id_idx);

		matched_count = 0;

		} else {
			CACKEY_DEBUG_PRINTF("  ... Not all %i (only found %i) attributes checked for found, not adding identity:%i", (int) cackey_sessions[hSession].search_query_count, (int) matched_count, (int) curr_id_idx);
		}
	}
	cackey_sessions[hSession].search_curr_id = curr_id_idx;
	*pulObjectCount = curr_out_id_idx;








	mutex_retval = cackey_mutex_unlock(cackey_biglock);
	if (mutex_retval != 0) {
		CACKEY_DEBUG_PRINTF("Error.  Unlocking failed.");

		return(CKR_GENERAL_ERROR);
	}

	cackey_sessions[hSession].sign_mechanism = pMechanism->mechanism;

	cackey_sessions[hSession].sign_buflen = 128;
	cackey_sessions[hSession].sign_bufused = 0;
	cackey_sessions[hSession].sign_buf = malloc(sizeof(*cackey_sessions[hSession].sign_buf) * cackey_sessions[hSession].sign_buflen);

	CACKEY_DEBUG_PRINTF("Session %lu sign_identity is %p (identity #%lu)", (unsigned long) hSession, &cackey_sessions[hSession].identities[hKey], (unsigned long) hKey);
	cackey_sessions[hSession].sign_identity = &cackey_sessions[hSession].identities[hKey];

	mutex_retval = cackey_mutex_unlock(cackey_biglock);
	if (mutex_retval != 0) {
		CACKEY_DEBUG_PRINTF("Error.  Unlocking failed.");

		return(CKR_GENERAL_ERROR);

		return(CKR_GENERAL_ERROR);
	}

	switch (cackey_sessions[hSession].sign_mechanism) {
		case CKM_RSA_PKCS:
			/* Ask card to sign */
			CACKEY_DEBUG_PRINTF("Asking to sign from identity %p in session %lu", cackey_sessions[hSession].sign_identity, (unsigned long) hSession);
			sigbuflen = cackey_signdecrypt(&cackey_slots[slotID], cackey_sessions[hSession].sign_identity, cackey_sessions[hSession].sign_buf, cackey_sessions[hSession].sign_bufused, sigbuf, sizeof(sigbuf), 1, 0);

			if (sigbuflen < 0) {
				/* Signing failed. */
				if (sigbuflen == CACKEY_PCSC_E_NEEDLOGIN) {
					retval = CKR_USER_NOT_LOGGED_IN;
				} else if (sigbuflen == CACKEY_PCSC_E_TOKENABSENT) {

AC_INIT(cackey, 0.6.6) 
AC_CONFIG_HEADERS(config.h)

dnl Locate standard tools
AC_PROG_CC
AC_PROG_MAKE_SET
AC_PROG_INSTALL
AC_AIX

		LPSCARDHANDLE hCard;
		SCARDCONTEXT hContext;
		DWORD dwActiveProtocol;
		LONG scard_conn_ret, scard_est_context_ret;

		scard_est_context_ret = SCardEstablishContext(SCARD_SCOPE_SYSTEM, NULL, NULL, &hContext);


		scard_conn_ret = SCardConnect(hContext, "Reader X", SCARD_SHARE_SHARED, SCARD_PROTOCOL_T0, &hCard, &dwActiveProtocol);
	]]), [
		AC_MSG_RESULT(okay)
	], [
		AC_MSG_RESULT(failed)

		AC_MSG_FAILURE([simple PC/SC program failed])
	]
)












dnl Set version script, to limit the scope of symbols
DC_SETVERSIONSCRIPT(libcackey.vers, libcackey.syms)

dnl Upate LDFLAGS to include setting the run-time linker path to the same as our compile-time linker
DC_SYNC_RPATH

dnl If we updated LIBOBJS, update SHLIBOBJS -- must be last.
DC_SYNC_SHLIBOBJS

dnl Produce Makefile
AC_OUTPUT(Makefile libcackey.syms)

		printf("  Slot %lu:\n", currSlot);

		chk_rv = C_GetSlotInfo(slots[currSlot], &slotInfo);
		if (chk_rv != CKR_OK) {
			return(1);
		}


		printf("    Desc   : %.*s\n", 32, slotInfo.slotDescription);
		printf("    ManufID: %.*s\n", 32, slotInfo.manufacturerID);
		printf("    HWVers : %i.%i\n", slotInfo.hardwareVersion.major, slotInfo.hardwareVersion.minor);
		printf("    FWVers : %i.%i\n", slotInfo.firmwareVersion.major, slotInfo.firmwareVersion.minor);
		printf("    Flags  : ");
		if ((slotInfo.flags & CKF_TOKEN_PRESENT) == CKF_TOKEN_PRESENT) {
			printf("CKF_TOKEN_PRESENT ");

			}
			printf("\n");
		}
	}

	chk_rv = C_OpenSession(slots[0], CKF_SERIAL_SESSION, NULL, NULL, &hSession);
	if (chk_rv == CKR_OK) {





		if ((tokenInfo.flags & CKF_LOGIN_REQUIRED) == CKF_LOGIN_REQUIRED) {
			fgets_ret = NULL;

			while (fgets_ret == NULL) {
				printf("** ENTER PIN: ");
				fflush(stdout);